2859709
Official DistributorSKU
PHX2859709
MPN
VAL-CP-N/PE-175-ST
Weight
0.041 kg
This product is Not Cancellable/Not Returnable
Series VAL-CP-N-PE
VAL-CP-N/PE-175-ST - Type 2 surge protection plug
Replacement plug for VAL-CP surge arrester with N-PE spark gap.
Technical Specifications
Product properties
| IEC test classification | II |
| IEC test classification | T2 |
| EN type | T2 |
| IEC power supply system | TN |
| IEC power supply system | TT |
| Type | DIN rail module, two-section, divisible |
| Number of Positions | 1 |
| Surge protection fault message | optical |
Insulation characteristics
| Overvoltage category | III |
| Pollution degree | 2 |
Electrical properties
| Nominal frequency fN | 50 Hz (60 Hz) |
Connection data
| Connection Method | pluggable |
Dimensions
| Width | 11.7 mm |
| Height | 46.4 mm |
| Depth | 56.4 mm |
Material specifications
| Color | blue grey (RAL 7031) |
| Flammability rating according to UL 94 | V-0 |
| CTI value of material | 600 |
| Insulating material | PBT-FR |
| Material group | I |
| Housing Material | PBT-FR |
Protective circuit
| Mode of protection | N-PE |
| Direction of action | N-PE |
| Nominal voltage UN | 120 V AC (TN - only N-PE) |
| Nominal voltage UN | 120 V AC (TT - only N-PE) |
| Nominal frequency fN | 50 Hz (60 Hz) |
| Maximum continuous operating voltage UC (N-PE) | 150 V AC |
| Residual current IPE | ≤ 1 µA |
| Nominal discharge current In (8/20) µs (N-PE) | 20 kA |
| Maximum discharge current Imax (8/20) µs (N-PE) | 40 kA |
| Follow current interrupt rating Ifi (N-PE) | 100 A (150 V AC) |
| Voltage protection level Up (N-PE) | ≤ 0.95 kV |
| Residual voltage Ures (N-PE) | ≤ 0.4 kV (at In) |
| Residual voltage Ures (N-PE) | ≤ 0.4 kV (at 10 kA) |
| Residual voltage Ures (N-PE) | ≤ 0.4 kV (at 5 kA) |
| Residual voltage Ures (N-PE) | ≤ 0.4 kV (at 4 kA) |
| Residual voltage Ures (N-PE) | ≤ 0.4 kV (at 2 kA) |
| TOV behavior at UT (N-PE) | 1200 V AC (200 ms / withstand mode) |
| Response time tA (N-PE) | ≤ 100 ns |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 80 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 2000 m (amsl) |
| Permissible humidity (operation) | 5 % ... 95 % |
| Shock (operation) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Vibration (Operation) | 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
UL specifications
| Maximum continuous operating voltage MCOV (N-G) | 150 V AC |
| Nominal discharge current In (N-G) | 20 kA |
| Mode of protection | N-G |
| Power distribution system | Single phase |
| Nominal frequency | 50/60 Hz |
| Measured limiting voltage MLV (N-G) | 560 V |
| Follow current (L-G) | 200 A (150 V AC) |
| SPD Type | 4CA |
Air clearances and creepage distances
| Standards/regulations | DIN VDE 0110-1 / IEC 60664-1 / IEC 61643-1 |
| Standards/specifications | IEC 61643-11 |
| Note | 2011 |
| Standards/specifications | EN 61643-11 |
| Note | 2012 |
Mounting
| Mounting Type | on base element |
Why Proax for Phoenix Contact 2859709?
Proax is an authorized distributor of Phoenix Contact 2859709 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
Combination of pluggable type 2 arrester and selective residual current circuit breaker(RCD switch) for 3-phase power supply networks (5-conductor system: L1, L2, L3, N, PE).
Combination of pluggable type 2 arrester and residual current circuit breaker(RCD switch) for 3-phase power supply networks (5-conductor system: L1, L2, L3,N, PE).
Combination of type 2 surge protection and detector circuit for detecting temporary surge voltages. Monitoring of the arrester and the detector circuit with status indicator. Design: 1-phase, mounting on NS 35.
Replacement plug for VAL-CP-TOV: Detector circuit for detecting temporary surge voltages. Monitoring the detector circuit with status indicator. Design: 1-phase
