2859534
Official DistributorSKU
PHX2859534
MPN
VAL-CP-3C-350 VF
Weight
0.308 kg
Series VAL-CP
VAL-CP-3C-350 VF - Type 2 surge arrester
Plug-in type 2 arrester (surge arrester) free of leakage current for 3-phase power supply networks with N and PE in a common conductor (4-conductor system: L1, L2, L3, PEN), with remote indication contact.
Technical Specifications
Product properties
| IEC test classification | II |
| IEC test classification | T2 |
| EN type | T2 |
| IEC power supply system | TN-C |
| Type | DIN rail module, two-section, divisible |
| Number of Positions | 3 |
| Surge protection fault message | Optical, remote indicator contact |
Insulation characteristics
| Overvoltage category | III |
| Pollution degree | 2 |
Electrical properties
| Nominal frequency fN | 50 Hz (60 Hz) |
| Nominal voltage UN | 240 V AC (230/400 V AC ... 240/415 V AC) |
| Nominal voltage UN | 415 V AC (L-L) |
Indicator/remote signaling
| Connection name | Remote fault indicator contact |
| Switching function | Changeover contact |
| Maximum operating voltage Umax. AC | 250 V AC |
| Maximum operating voltage Umax DC | 125 V DC |
| Max. operating current Imax | 1 A AC (inductive) |
| Max. operating current Imax | 1 A AC (ohmic) |
| Max. operating current Imax | 30 mA DC (inductive) |
| Max. operating current Imax | 200 mA DC (ohmic) |
| Min. permissible switching capacity | 0.12 VA (12 V, 10 mA) |
Connection data
| Connection Method | Screw connection |
| Screw thread | M5 |
| Tightening torque, min | 4.5 Nm |
| Stripping length | 16 mm |
| Conductor cross section flexible min. | 2.5 mm² |
| Conductor cross section flexible max. | 16 mm² |
| Conductor cross section, rigid min. | 2.5 mm² |
| Conductor cross section, rigid max. | 25 mm² |
Remote fault indicator contact
| Connection Method | Pluggable screw connection |
| Screw thread | M2 |
| Tightening torque, min | 0.25 Nm |
| Stripping length | 7 mm |
| Conductor cross section flexible min. | 0.14 mm² |
| Conductor cross section flexible max. | 1.5 mm² |
| Conductor cross section, rigid min. | 0.14 mm² |
| Conductor cross section, rigid max. | 1.5 mm² |
Dimensions
| Width | 37.25 mm |
| Height | 98.5 mm |
| Depth | 70 mm |
Material specifications
| Flammability rating according to UL 94 | V0 |
| Housing Material | PBT |
Protective circuit
| Direction of action | 3L-N/PE |
| Nominal frequency fN | 50 Hz (60 Hz) |
| Maximum continuous operating voltage UC (L-PEN) | 350 V AC |
| Rated load current IL | 40 A (40 A ... 63 A) |
| Residual current IPE | ≤ 1 µA (Residual current IPE) |
| Standby power consumption PC | ≤ 0.35 mW |
| Power consumption without load Pc | ≤ 0.35 mW |
| Nominal discharge current In (8/20) µs (L-PEN) | 10 kA (1 channel) |
| Nominal discharge current In (8/20) µs (L-PEN) | 30 kA (all channels) |
| Maximum discharge current Imax (8/20) µs (L-PEN) | 60 kA (all channels) |
| Voltage protection level Up (L-PEN) | ≤ 1.5 kV |
| Response time tA (L-PEN) | ≤ 100 ns |
| Max. backup fuse with V-type through wiring | 40 A |
| Max. backup fuse with branch wiring | 125 A (gL/gG) |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 80 °C |
Air clearances and creepage distances
| Standards/regulations | DIN VDE 0110-1 / IEC 60664-1 / IEC 61643-1 |
Standards
| Standards/regulations | IEC 61643-1 |
| Standards/regulations | EN 61643-11 |
| Standards/regulations | UL 1449 |
| Standards/regulations | IEEE C62.1 |
| Standards/regulations | IEEE C62.34 |
| Standards/regulations | IEEE C62.45 |
| Standards/specifications | IEC 61643-1 |
| Note | 1998 |
| Standards/specifications | DIN EN 61643-11 |
| Note | 2002 |
| Standards/specifications | UL 1449 |
| Standards/specifications | IEEE C62.1/C62.34/C62.45 |
Mounting
| Mounting Type | DIN rail: 35 mm |
Why Proax for Phoenix Contact 2859534?
Proax is an authorized distributor of Phoenix Contact 2859534 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
VAL-CP-3S-BE - Base element for type 2 arresters of the VALVETRAB compact series of products. Version for 3-phase power supply with separate installation of N and PE conductors.
