Official DistributorSKU
MPN
PI-EX-UI-UI-AO-NI-NC
Weight
0.085 kg
PI-EX-UI-UI-AO-NI-NC - Signal isolator
PI 3-way output isolator, output power-limited (EEX-nL), with configurable output/input, for electrical isolation of analog signals
Technical Specifications
Electrical properties
| Alignment span | 4 % |
| Alignment zero | ± 4 % |
| Limit frequency (3 dB) | 30 Hz |
| Test voltage output/power supply | 1.5 kV AC |
| Test voltage input/output | 1.5 kV AC |
| Test voltage input/power supply | 1.5 kV AC |
| Step response (10-90%) | 11 ms |
| Maximum temperature coefficient | 0.0075 % |
| Maximum transmission error | 0.1 % (of end value, at 20°C) |
Supply
| Supply Voltage Range | 20 V ... 30 V |
| Typical current consumption | 35 mA (at 24 V DC/20 mA) |
| Max. current consumption | 50 mA |
| Power dissipation | typ. 0.84 W (at 24 V DC/20 mA, maximum 1.2 W) |
Signal
| Configurable/programmable | Yes, unconfigured |
| Voltage input signal | 0 V ... 10 V (please indicate if different setting when ordering) |
| Max. voltage input signal | 30 V |
| Max. current input signal | 50 mA |
| Input resistance of voltage input | 240 kΩ |
| Input resistance current input | 50 Ω |
| Output description | Power-limited |
| Configurable/programmable | Yes, unconfigured |
| Voltage output signal | 0 V ... 10 V (please indicate if different setting when ordering) |
| Max. voltage output signal | 15 V |
| Max. current output signal | 45 mA |
| Load/output load voltage output | ≥ 5 kΩ |
| Load/Output Load Current Output | ≤ 500 Ω |
Connection data
| Stripping length | 12 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 14 |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
Safety data
| Max. output voltage Uo | 18 V |
| Max. output current Io | 140 mA |
| Max. output power Po | 1.9 W |
| EEX specification | [EEx nL] IIC, EX II (3)GD, KEMA 98 ATEX 1777X |
| IIA: Max. external inductivity Lo / Max. external capacitance Co | 8 mH / 35.9 µF |
| IIB: Max. external inductivity Lo / Max. external capacitance Co | 4 mH / 8.9 µF |
| IIC: Max. external inductivity Lo / Max. external capacitance Co | 410 µH / 1.3 µF |
Signaling
| Status display | Green LED (supply voltage) |
Dimensions
| Width | 12.4 mm |
| Height | 108.6 mm |
| Depth | 145 mm |
Material specifications
| Color | green (RAL 6021) |
| Flammability rating according to UL 94 | V0 |
| Housing Material | Polyamide PA non-reinforced |
Ambient conditions
| Ambient Temperature (Operation) | -20 °C ... 60 °C (vertical assembly) |
| Ambient Temperature (Operation) | -20 °C ... 50 °C (horizontal assembly) |
| Ambient temperature (storage/transport) | -20 °C ... 80 °C |
Why Proax for Phoenix Contact 2835396?
Proax is an authorized distributor of Phoenix Contact 2835396 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
PI 3-way input isolator, input power-limited (EEX-nL), with configurable input/output, for electrical isolation of analog signals
PI-EX-TB/T - Ex-basic terminal block, with knife disconnection and integrated temperature measurement of the input terminal blocks for cold point compensation
Adapter cables in [Eex ia]IIC (Ex) II(1)G for programming PI/Ex-THC(RTD)/I modules (D-SUB 9-pos. on stereo jack connector, 3 m total length)
Ex i analog input: Repeater power supply, HART. Feeds intrinsically safe 2-conductor measuring transducers installed in an Ex area and transmits the 4-20 mA signal to a load in a safe area. Galvanic 3-way isolation (input / output / supply).
Ex i temperature transducer: converts measured values from resistance thermometers installed in the Ex area to a 0/4 mA ... 20 mA signal for driving a non-intrinsically safe load. Freely programmable. 3-way electrical isolation.
PI-EX-ME-RJ - Adapter cable, for programming PI-Ex-ME... modules (D-SUB 25-pos. to western plug, 1.6 m long). Configuration software can be downloaded free of cost from the Download area.
