The figure shows version CT 10-9VA-F/PE-230 AC
2830485
Official DistributorSKU
PHX2830485
MPN
CT 10-9VA-120AC
Weight
0.103 kg
Series CT
CT 10-9VA-120AC - Surge protection plug
LSA-PLUS plug (COMTRAB CT 10) with surge protection incl. visual fault warning for nine 2-core signal circuits. Nominal voltage: 120 V AC. Design: 10 double wires
Technical Specifications
Product properties
| Product family | COMTRAB |
| IEC test classification | C1 |
| IEC test classification | C3 |
| Type | LSA-PLUS module |
| Arrester can be tested with CHECKMASTER from software version: | From SW rev. 1.00 |
Electrical properties
| Nominal voltage UN | 120 V AC |
Connection data
| Connection Method | can be plugged into COMTRAB-TERMIBLOCK and LSA-PLUS disconnect and switching strips |
Dimensions
| Width | 111 mm |
| Height | 22 mm |
| Depth | 68.5 mm |
Material specifications
| Flammability rating according to UL 94 | V2 |
| Housing Material | PBT |
Mechanical data
| Open side panel | No |
Protective circuit
| Direction of action | Line-Line & Line-Earth Ground |
| Maximum continuous voltage UC | 200 V DC |
| Maximum continuous voltage UC | 150 V AC |
| Maximum continuous voltage UC (line-earth) | 200 V DC |
| Maximum continuous voltage UC (line-earth) | 150 V AC |
| Maximum continuous voltage UC (line-signalground) | 200 V DC |
| Maximum continuous voltage UC (line-signalground) | 150 V AC |
| Operating effective current IC at UC | ≤ 1.5 mA |
| Operating effective current IC at UC | ≤ 2.5 mA |
| Residual current IPE | ≤ 1 µA |
| Nominal discharge current In (8/20) µs (line-ground) | 1.5 kA |
| Nominal discharge current In (8/20) µs (line-signal ground) | 1.5 kA |
| Nominal discharge current In (8/20) µs (signalground-earth) | 5 kA |
| Total surge current (8/20) µs | 5 kA |
| Max. discharge current Imax (8/20) µs maximum (line-earth) | 5 kA (10-PE) |
| Max. discharge current Imax (8/20) µs maximum (line-signalground) | 4.5 kA (10) |
| Residual voltage at In (conductor-ground) | ≤ 1.4 kV |
| Residual voltage at In (line-signalground) | ≤ 600 V |
| Residual voltage at In, fixed cable length | 10 m |
| Max. energy absorption (2 ms), asym. | 40 J |
| Voltage protection level Up (line-earth) | ≤ 1.4 kV (10-PE) |
| Voltage protection level Up (line-signalground) | ≤ 600 V (10) |
| Response time tA (line-line) | ≤ 25 ns |
| Response time tA (line-earth) | ≤ 100 ns |
| Response time tA (line-signalground) | ≤ 25 ns |
| Frequency Range | 50 Hz ... 60 Hz |
| Capacity (core-earth) | 2 pF (10-PE) |
| Capacity (line-signalground) | 570 pF (10) |
| Max. required back-up fuse | 1.5 A (gL) |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 85 °C |
Air clearances and creepage distances
| Standards/regulations | VDE 0110-1 / IEC 60664 |
Standards Information technology specification
| Standards/regulations | IEC 61643-21 |
| Standards/regulations | IEC 61643-21 |
| Standards/specifications | IEC 61643-21 |
| Note | 2000 |
Mounting
| Mounting Type | On CT-TERMIBLOCK and LSA-PLUS disconnect strip |
Why Proax for Phoenix Contact 2830485?
Proax is an authorized distributor of Phoenix Contact 2830485 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
CT 10-MB/ 3, Mounting clip, for holding 3 disconnect or ground wire strips. Version: 10 double conductors, dimensions: A 104.5 mm, B 65 mm.
