Measurement & Monitoring

VIP/S/D25M/BASE 1-8/L/C/EX - 8-channel VIP I/O marshalling base element for universal use. All connections as screw connection technology. This module with the D-SUB 25 connector is pin compatible with the Foxboro I/A series DCS.

IOA FEED-THRU/EX - Feed-through terminal block for VIP I/O-Marshalling base elements for conveying field signals to or from the I/O system.

FA MCR-D-TUI-UI-2REL-UP - Process indicator, multifunctional, in control panel component housing for monitoring and displaying analog measurement data. Universal inputs enable the connection of current, voltage, RTDs, and TCs. 2 relay change-over contact outputs and 1 analog output..

VIP/S/MC/BASE 1-8/L/C/EX - 8-channel VIP I/O marshalling base element for universal use. All connections as screw connection technology. With the COMBICON connector, compatible with the Honeywell C300 and RUSIO series. Marking for channels 1–8 and painting.

MINI MCR-2-V8-MOD-RTU - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a Modbus/RTU network via a communication adapter.

TC-C-2MIN-AI-05061516 - Cable set for signal transmission on the termination carrier for modules from the MINI Analog series. Connection of terminal points 5 and 6 of two adjacent MINI Analog modules to the signal PCB via a 4-pos. PTSM connector.

Loop-powered isolators - MINI MCR-2-I-I-ILP-PT

Loop-powered isolators - MINI MCR-2-2I-2I-ILP-PT

Voltage measuring transducers - MACX MCR-VAC

FA MCR-DS-I-I-OLP - Output loop-powered process indicator for installation in the control cabinet. HART

Temp. controller PRO,1/32 DIN (24x48mm),screw terminals,2 AUX,1 x 12 VDC pulse OUT,1 x EVT. I/P,24V AC/DC

MCR-DIN-RAIL-ADAPTER HT - DIN rail adapter for head-mounted transducers. Suitable for 35 mm DIN rails in accordance with EN 60715.

Temperature measuring transducer - MACX MCR-TS-I-OLP

Limit value switches - MINI MCR-2-T-2RO

Monitoring relay - EMD-BL-PTC

MINI MCR-2-SPS-24-15 - Constant voltage source with pluggable connection technology for the generation of a highly precise constant voltage of 15 V and for the supply of sensors without internal power supply. Screw connection technology.

Universally configurable frequency transducer for converting frequency (Hz/rpm) and PWM signals into standard signals. Sensor voltages greater than 8.2 V DC are possible in combination with MINI MCR-2-SPS-PT 1033201. Push-in connection technology.

Repeater power supply - MINI MCR-2-RPSS-I-2I-PT

Signal isolator - MACX MCR-SL-RPSS-2I-2I

MACX MCR-EX-SL-NAM-NAM-SP - Ex i NAMUR signal conditioner for operating Ex i proximity sensors and switches in the Ex area. Passive transistor output (resistive in accordance with EN 60947-5-6), line fault transparency, up to SIL 2 in accordance with IEC 61508, Push-in connection