Measurement & Monitoring

Repeater power supply - MACX MCR-SL-RPSSI-2I-SP

MINI MCR-EX-SD-21-48-LFD

Temperature controller, 1/16 DIN (48x48 mm), 12 VDC pulse output, 3 AUX, RS-485, SSR failure detection/3-phase, 24 VAC/DC

Mounting bracket and sticker, sensing band sticker, Used for F03-16PE (adhesive tape).

MCR-SL-CUC-200-U - Universal current transducer, for measuring DC, AC, and distorted currents, 0 ... 200 A input current, 0 ... 10 V output

Modem - TC EXTENDER 6004 ETH-2S

MINI MCR-2-NAM-2RO - Configurable NAMUR signal conditioner with plug-in connection technology for proximity sensors, floating switch contacts, and switch contacts with resistance circuit. 2 transistor outputs, configurable via DIP switch. Screw connection technology.

MINI MCR-2-UI-FRO - Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.

Loop-powered isolators - MINI MCR-2-UI-I-OLP-PT

MINI MCR-2-CVCS - Constant voltage/current source with plug-in connection technology, input voltage: 9.6 V DC ... 30 V DC. Output voltage: 1.25 V ... 10 V DC or output current: 2.5 mA ... 20 mA can be set. Configurable via DIP switch. Screw connection technology.

MINI MCR-2-CVCS-PT - Constant voltage/current source with plug-in connection technology, input voltage: 9.6 V DC ... 30 V DC. Output voltage: 1.25 V DC ...10 V DC or output current: 2.5 mA ... 20 mA can be set. Configurable via DIP switch. Push-in connection technology.

SCK-M-I-8S-20A - SCK measuring module for monitoring photovoltaic systems, 8 x current measurement up to 20 A, 1 x digital input, interface to SCK communication module, interface to voltage measuring module

TC-MACX-MCR-PTB - Power and fault signaling module with screw connection, only for use on the Termination Carrier, excluding corresponding DIN rail bus connector

Loop-powered isolators - MACX MCR-SL-I-I-ILP

Loop-powered isolators - MACX MCR-SL-I-I-ILP-SP

Loop-powered isolators - MACX MCR-SL-2I-2I-ILP

Loop-powered isolators - MACX MCR-SL-2I-2I-ILP-SP

Adapter - IFS-BT-PROG-ADAPTER

PACT RCP-4000A-UIRO-D95 - Set consisting of a 4-way signal conditioner with screw connection technology and a Rogowski coil 300 mm in length/95 mm in diameter for AC current measurement on busbars and power lines.The signal conditioner outputs 8 different standard signals on the output side and has one switching output.

PACT RCP-4000A-UIRO-PT-D95 - Set consisting of a 4-way signal conditioner with push-in connection technology and a Rogowski coil 300 mm in length/95 mm in diameter for AC current measurement on busbars and power lines.The signal conditioner outputs 8 different standard signals on the output side and has one switching output.