Official Distributor
SKU
MPN
2905233
Weight
0.046 kg
This product is Not Cancellable/Not Returnable
Series PLT-SEC-T3
PLT-SEC-T3-60-P - Type 3 surge protection plug
Replacement plug for type 3 device protection from the PLUGTRAB SEC T3 product range. 60 V nominal voltage.
Technical Specifications
Product properties
Product family | SEC Family |
IEC power supply system | TN-S |
Type | Male |
Number of Positions | 2 |
Surge protection fault message | optical |
Insulation characteristics
Overvoltage category | III |
Pollution degree | 2 |
IEC test classification | III |
IEC test classification | T3 |
EN type | T3 |
Connection data
Connection Method | pluggable |
Dimensions
Width | 17.5 mm |
Height | 60.9 mm |
Depth | 44.8 mm |
Horizontal pitch | 1 Div. |
Material specifications
Flammability rating according to UL 94 | V-0 |
CTI value of material | 600 |
Insulating material | PA 6.6-FR 20% GF |
Insulating material | PA 6.6-FR |
Material group | I |
Housing Material | PA 6.6-FR 20 % GF |
Housing Material | PA 6.6-FR |
Protective circuit
Mode of protection | L-N |
Mode of protection | L-PE |
Mode of protection | N-PE |
Mode of protection | (L+) - (L-) |
Mode of protection | (L+/L-) - PE |
Direction of action | 1L-N & N-PE |
Nominal voltage UN | 60 V AC (TN-S) |
Nominal frequency fN | 50 Hz (60 Hz) |
Maximum continuous voltage UC | 100 V AC |
Maximum continuous voltage UC | 80 V DC |
Residual current IPE | ≤ 5 µA |
Standby power consumption PC | ≤ 75.00 mVA (at UREF) |
Standby power consumption PC | ≤ 150.00 mVA (at UC) |
Reference test voltage UREF | 66.00 V AC |
Nominal discharge current In (8/20) µs | 2 kA |
Combination wave UOC | 4 kV |
Voltage protection level Up (L-N) | ≤ 0.48 kV |
Voltage protection level Up (L-PE) | ≤ 0.9 kV |
Voltage protection level Up (N-PE) | ≤ 0.9 kV |
TOV behavior at UT (L-N) | 120 V AC (5 s / withstand mode) |
TOV behavior at UT (L-N) | 120 V AC (120 min / withstand mode) |
TOV behavior at UT (L-PE) | 120 V AC (5 s / withstand mode) |
TOV behavior at UT (L-PE) | 120 V AC (120 min / withstand mode) |
Response time tA (L-N) | ≤ 25 ns |
Response time tA (L-PE) | ≤ 100 ns |
Response time tA (N-PE) | ≤ 100 ns |
Short-circuit current rating ISCCR | 1.5 kA AC |
Short-circuit current rating ISCCR | 1 kA DC |
Ambient conditions
Degree of Protection | IP20 |
Ambient Temperature (Operation) | -40 °C ... 80 °C |
Ambient temperature (storage/transport) | -40 °C ... 80 °C |
Altitude | ≤ 2000 m (amsl) |
Permissible humidity (operation) | 5 % ... 95 % |
Shock (operation) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
Vibration (Operation) | 5g (10 ... 150 Hz/20 cycles/axis/X, Y, Z) |
UL specifications
Maximum continuous operating voltage MCOV | 100 V AC |
Maximum continuous operating voltage MCOV | 80 V DC |
Nominal discharge current In | 3 kA |
Mode of protection | L-N |
Mode of protection | L-G |
Mode of protection | N-G |
Mode of protection | (L+) - (L-) |
Mode of protection | (L+) - G |
Mode of protection | (L-) - G |
Nominal Voltage | 60 V DC |
Power distribution system | Single phase |
Nominal frequency | 50/60 Hz |
Measured limiting voltage MLV (L-N) | 540 V |
Measured limiting voltage MLV (L-G) | 830 V |
Measured limiting voltage MLV (N-G) | 830 V |
Measured limiting voltage MLV (L+) - (L-) | 540 V |
Measured limiting voltage MLV (L+) - G | 830 V |
Measured limiting voltage MLV (L-) - G | 830 V |
SPD Type | 4CA |
EN 61643-11
Standards/specifications | EN 61643-11 |
Note | 2012 |
Mounting
Mounting Type | on base element |
Accessories
Why Proax for Phoenix Contact PLT-SEC-T3-60-P?
Proax is an authorized distributor of Phoenix Contact PLT-SEC-T3-60-P and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Alternate Names | PLTSECT360P |
Pack Size | 1 |
Recommended