Official DistributorSKU
MPN
PLT-SEC-T3-230-P-UT/PT
Weight
0.039 kg
Series PLT-SEC-T3
PLT-SEC-T3-230-P-UT/PT - Type 3 surge protection plug
Replacement plug for type 2/3 surge protection from the PLT-SEC-…-UT/PT product series. Nominal voltage 230 V.
Technical Specifications
Product properties
| Product family | SEC Family |
| IEC power supply system | TN-S |
| IEC power supply system | TT |
| Type | Male |
| Number of Positions | 2 |
| Surge protection fault message | optical |
Insulation characteristics
| Overvoltage category | III |
| Pollution degree | 2 |
| IEC test classification | II / III |
| IEC test classification | T2 / T3 |
| EN type | T2 / T3 |
| Number of Ports | One |
Connection data
| Connection Method | pluggable |
Dimensions
| Width | 17.5 mm |
| Height | 46.7 mm |
| Depth | 65.7 mm |
| Horizontal pitch | 1 Div. |
Material specifications
| Color | light grey (RAL 7035) |
| Color | gray (RAL 7042) |
| Flammability rating according to UL 94 | V-0 |
| CTI value of material | 600 |
| Insulating material | PA 6.6-FR 20 % GF |
| Insulating material | PA 6.6-FR |
| Housing Material | PA 6.6-FR 20 % GF |
| Housing Material | PA 6.6-FR |
Protective circuit
| Mode of protection | L-N |
| Mode of protection | L-PE |
| Mode of protection | N-PE |
| Direction of action | 1L-N & N-PE |
| Nominal voltage UN | 240 V AC (TN-S) |
| Nominal voltage UN | 240 V AC (TT) |
| Nominal frequency fN | 50 Hz (60 Hz) |
| Maximum continuous voltage UC | 264 V AC |
| Residual current IPE | ≤ 5 µA |
| Standby power consumption PC | ≤ 26.40 mVA (at UREF) |
| Standby power consumption PC | ≤ 26.40 mVA (at UC) |
| Reference test voltage UREF | 264.00 V AC |
| Nominal discharge current In (8/20) µs | 5 kA |
| Maximum discharge current Imax (8/20) µs | 10 kA |
| Combination wave UOC | 6 kV |
| Voltage protection level Up (L-N) | ≤ 1.25 kV (at UOC) |
| Voltage protection level Up (L-N) | ≤ 1.4 kV (at In) |
| Voltage protection level Up (L-PE) | ≤ 1.4 kV |
| Voltage protection level Up (N-PE) | ≤ 1.4 kV |
| TOV behavior at UT (L-N) | 400 V AC (5 s / withstand mode) |
| TOV behavior at UT (L-N) | 457 V AC (120 min / safe failure mode) |
| TOV behavior at UT (L-PE) | 457 V AC (5 s / withstand mode) |
| TOV behavior at UT (L-PE) | 457 V AC (120 min / withstand mode) |
| TOV behavior at UT (L-PE) | 1464 V AC (200 ms / safe failure mode) |
| TOV behavior at UT (N-PE) | 1200 V AC (200 ms / safe failure mode) |
| Response time tA (L-N) | ≤ 25 ns |
| Response time tA (L-PE) | ≤ 100 ns |
| Response time tA (N-PE) | ≤ 100 ns |
| Short-circuit current rating ISCCR | 10 kA AC |
| Max. backup fuse with branch wiring | 32 A (gG / B / C) |
Additional technical data
| Short-circuit current rating ISCCR | 0.25 kA DC (Without additional backup fuse in the DC branch wiring) |
| Short-circuit current rating ISCCR | 5 kA DC (for 20 A gG / B backup fuse) |
| Residual voltage Ures (L-N) | ≤ 1.15 kV (at 2 kA) |
| Residual voltage Ures (L-N) | ≤ 1.25 kV (at 3 kA) |
| Residual voltage Ures (L-N) | ≤ 1.1 kV (at UOC = 4 kV) |
| Residual voltage Ures (L-PE) | ≤ 1.1 kV (at 2 kA) |
| Residual voltage Ures (L-PE) | ≤ 1.1 kV (at 3 kA) |
| Residual voltage Ures (L-PE) | ≤ 1.2 kV (at UOC = 4 kV) |
| Residual voltage Ures (N-PE) | ≤ 1.1 kV (at 2 kA) |
| Residual voltage Ures (N-PE) | ≤ 1.1 kV (at 3 kA) |
| Residual voltage Ures (N-PE) | ≤ 1.2 kV (at UOC = 4 kV) |
| Maximum continuous voltage UC | 275 V AC |
| Maximum continuous voltage UC | 240 V DC |
| Mode of protection | (DC+) - (DC-) |
| Mode of protection | (DC+/DC-) - PE |
| IEC test classification (in accordance with IEC 61643-21) | D1 |
| Impulse durability (wire-wire) | D1 - 500 A |
| Impulse durability (line-earth) | D1 - 500 A |
| Pulse discharge current Iimp (10/350) µs (line-line) | 0.5 kA |
| Pulse discharge current Iimp (10/350) µs (line-earth) | 0.5 kA |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 80 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 6000 m (amsl) |
| Permissible humidity (operation) | 5 % ... 95 % |
| Shock (operation) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Vibration (Operation) | 5g (5 ... 500 Hz / 2.5 h / X, Y, Z) |
UL specifications
| Maximum continuous operating voltage MCOV | 264 V AC |
| Maximum continuous operating voltage MCOV | 240 V DC |
| Nominal discharge current In | 5 kA |
| Mode of protection | L-N |
| Mode of protection | L-G |
| Mode of protection | N-G |
| Mode of protection | (DC+) - (DC-) |
| Mode of protection | (DC+) - G |
| Mode of protection | (DC-) - G |
| Nominal Voltage | 240 V DC |
| Power distribution system | Single phase |
| Power distribution system | DC |
| Nominal frequency | 50/60 Hz |
| Measured limiting voltage MLV (L-N) | 1150 V |
| Measured limiting voltage MLV (L-G) | 1180 V |
| Measured limiting voltage MLV (N-G) | 1180 V |
| SPD Type | 4CA |
Standards and Regulations
| Standards/specifications | IEC 61643-11 |
| Note | 2011 |
EN 61643-11
| Standards/specifications | EN 61643-11 |
| Note | 2012 |
Mounting
| Mounting Type | on base element |
Why Proax for Phoenix Contact 2907923?
Proax is an authorized distributor of Phoenix Contact 2907923 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2905235 - Replacement plug for type 3 device protection from the PLUGTRAB SEC T3 product range. 230 V nominal voltage.
2905229 - Pluggable device protection, according to type 3/class III, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with integrated surge-proof fuse and remote indication contact. Also suitable for DC applications.
2907919 - Type 2/3 surge protection, consisting of protective plug and base element with screw connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage: 230 V AC/DC
2907928 - Type 2/3 surge protection, consisting of protective plug and base element with Push-in connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage: 230 V AC/DC
2907916 - Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 24 V AC/DC
2907925 - Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 24 V AC/DC
2905223 - Pluggable device protection, according to type 3/class III, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with integrated surge-proof fuse and remote indication contact. Also suitable for DC applications.
2905232 - Replacement plug for type 3 device protection from the PLUGTRAB SEC T3 product range. 24 V nominal voltage.
2907920 - Replacement plug for type 3 surge protection from the PLT-SEC-…-UT/PT product series. Nominal voltage 24 V.
2907922 - Replacement plug for type 2/3 surge protection from the PLT-SEC-…-UT/PT product series. Nominal voltage 120 V.
2905228 - Pluggable device protection, according to type 3/class III, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with integrated surge-proof fuse and remote indication contact. Also suitable for DC applications.
2907918 - Type 2/3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 120 V AC/DC
2907927 - Type 2/3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 120 V AC/DC
2907917 - Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 60 V AC/DC
2905225 - Pluggable device protection, according to type 3/class III, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with integrated surge-proof fuse and remote indication contact. Also suitable for DC applications.
2905233 - Replacement plug for type 3 device protection from the PLUGTRAB SEC T3 product range. 60 V nominal voltage.
2907921 - Replacement plug for type 3 surge protection from the PLT-SEC-…-UT/PT product series. Nominal voltage 60 V.
2905236 - Replacement plug for type 3 device protection from the PLUGTRAB SEC T3 3S product range. 230 V nominal voltage.
2905230 - Plug-in device protection, according to type 3/class III, for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), with integrated surge-proof fuse and remote indication contact.
2905592 - Base element for protective plugs from the PLUGTRAB SEC product series with remote indication contact.