Official DistributorSKU
MPN
PLT-SEC-T3-24-FM
Weight
0.091 kg
Series PLT-SEC-T3
PLT-SEC-T3-24-FM - Type 3 surge protection device
Pluggable device protection, according to type 3/class III, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with integrated surge-proof fuse and remote indication contact. Also suitable for DC applications.
Technical Specifications
Product properties
| Product family | SEC Family |
| Type | DIN rail module, two-section, divisible |
| Number of Positions | 2 |
| Surge protection fault message | Optical, remote indicator contact |
Insulation characteristics
| Overvoltage category | III |
| Pollution degree | 2 |
| IEC test classification | III |
| IEC test classification | T3 |
| EN type | T3 |
| Number of Ports | One |
Indicator/remote signaling
| Connection name | Remote fault indicator contact |
| Switching function | N/C contact |
| Operating Voltage | 250 V AC |
| Operating Voltage | 125 V DC (200 mA DC) |
| Operating current | 3 A AC |
| Operating current | 1 A DC (30 V DC) |
Connection data
| Connection Method | Screw connection |
| Screw thread | M3 |
| Tightening torque | 0.8 Nm |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Conductor cross section AWG | 24 ... 12 |
Dimensions
| Width | 17.7 mm |
| Height | 90 mm |
| Depth | 74.5 mm (incl. DIN rail 7.5 mm) |
| Horizontal pitch | 1 Div. |
Material specifications
| Flammability rating according to UL 94 | V-0 |
| CTI value of material | 600 |
| Insulating material | PA 6.6-FR 20% GF |
| Insulating material | PA 6.6-FR |
| Material group | I |
| Housing Material | PA 6.6-FR 20 % GF |
| Housing Material | PA 6.6-FR |
Protective circuit
| Mode of protection | L-N |
| Mode of protection | L-PE |
| Mode of protection | N-PE |
| Mode of protection | (L+) - (L-) |
| Mode of protection | (L+/L-) - PE |
| Direction of action | 1L-N & N-PE |
| Nominal voltage UN | 24 V AC (TN-S) |
| Nominal frequency fN | 50 Hz (60 Hz) |
| Maximum continuous voltage UC | 34 V AC |
| Maximum continuous voltage UC | 34 V DC |
| Rated load current IL | 26 A (30 °C) |
| Residual current IPE | ≤ 5 µA |
| Standby power consumption PC | ≤ 30.00 mVA (at UREF) |
| Standby power consumption PC | ≤ 50.00 mVA (at UC) |
| Reference test voltage UREF | 27.00 V AC |
| Nominal discharge current In (8/20) µs | 1 kA |
| Combination wave UOC | 2 kV |
| Voltage protection level Up (L-N) | ≤ 0.25 kV |
| Voltage protection level Up (L-PE) | ≤ 0.65 kV |
| Voltage protection level Up (N-PE) | ≤ 0.65 kV |
| TOV behavior at UT (L-N) | 50 V AC (5 s / withstand mode) |
| TOV behavior at UT (L-N) | 50 V AC (120 min / withstand mode) |
| TOV behavior at UT (L-PE) | 50 V AC (5 s / withstand mode) |
| TOV behavior at UT (L-PE) | 50 V AC (120 min / withstand mode) |
| Response time tA (L-N) | ≤ 25 ns |
| Response time tA (L-PE) | ≤ 100 ns |
| Response time tA (N-PE) | ≤ 100 ns |
| Short-circuit current rating ISCCR | 1.5 kA AC |
| Short-circuit current rating ISCCR | 1 kA DC |
| Max. backup fuse with branch wiring | not required |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 80 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 2000 m (amsl) |
| Permissible humidity (operation) | 5 % ... 95 % |
| Shock (operation) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Vibration (Operation) | 5g (10 ... 150 Hz/20 cycles/axis/X, Y, Z) |
UL specifications
| Maximum continuous operating voltage MCOV | 34 V AC |
| Maximum continuous operating voltage MCOV | 34 V DC |
| Nominal discharge current In | 1 kA |
| Mode of protection | L-N |
| Mode of protection | L-G |
| Mode of protection | N-G |
| Mode of protection | (L+) - (L-) |
| Mode of protection | (L+) - G |
| Mode of protection | (L-) - G |
| Nominal Voltage | 24 V DC |
| Rated load current IL | 25 A |
| Power distribution system | Single phase |
| Nominal frequency | 50/60 Hz |
| Measured limiting voltage MLV (L-N) | 290 V |
| Measured limiting voltage MLV (L-G) | 560 V |
| Measured limiting voltage MLV (N-G) | 560 V |
| Measured limiting voltage MLV (L+) - (L-) | 290 V |
| Measured limiting voltage MLV (L+) - G | 560 V |
| Measured limiting voltage MLV (L-) - G | 560 V |
| SPD Type | 4CA |
UL connection data
| Tightening torque | 5 lbf-in. ... 7 lbf-in. |
| Conductor cross section AWG | 14 ... 12 |
Standards and Regulations
| Standards/specifications | IEC 61643-11 |
| Note | 2011 |
EN 61643-11
| Standards/specifications | EN 61643-11 |
| Note | 2012 |
Mounting
| Mounting Type | DIN rail: 35 mm |
Accessories
Why Proax for Phoenix Contact 2905223?
Proax is an authorized distributor of Phoenix Contact 2905223 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2907925 - Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 24 V AC/DC
2907916 - Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 24 V AC/DC
PLT-SEC-T3-230-FM, Pluggable device protection, according to type 3/class III, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with integrated surge-proof fuse and remote indication contact. Also suitable for DC applications.
2907928 - Type 2/3 surge protection, consisting of protective plug and base element with Push-in connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage: 230 V AC/DC
2907919 - Type 2/3 surge protection, consisting of protective plug and base element with screw connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage: 230 V AC/DC
PLT-SEC-T3-120-FM, Pluggable device protection, according to type 3/class III, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with integrated surge-proof fuse and remote indication contact. Also suitable for DC applications.
2907927 - Type 2/3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 120 V AC/DC
2907918 - Type 2/3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 120 V AC/DC
PLT-SEC-T3-60-FM, Pluggable device protection, according to type 3/class III, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with integrated surge-proof fuse and remote indication contact. Also suitable for DC applications.
2907917 - Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 60 V AC/DC
2905592 - Base element for protective plugs from the PLUGTRAB SEC product series with remote indication contact.
2905230 - Plug-in device protection, according to type 3/class III, for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), with integrated surge-proof fuse and remote indication contact.
