Buy Phoenix Contact 2905229 PLT-SEC-T3-230-FM

Official Distributor

By Phoenix Contact

SKU

MPN

2905229

Weight

0.091 kg

This product has been discontinued and replaced with PLT-SEC-T3-230-FM-UT

Series PLT-SEC-T3

PLT-SEC-T3-230-FM - Type 3 surge protection device

Pluggable device protection, according to type 3/class III, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with integrated surge-proof fuse and remote indication contact. Also suitable for DC applications.

Technical Specifications

Product properties

Product family	SEC Family
IEC power supply system	TT
IEC power supply system	TN-S
Type	DIN rail module, two-section, divisible
Number of Positions	2
Surge protection fault message	Optical, remote indicator contact

Insulation characteristics

Overvoltage category	III
Pollution degree	2
IEC test classification	III
IEC test classification	T3
EN type	T3
Number of Ports	One

Indicator/remote signaling

Connection name	Remote fault indicator contact
Switching function	N/C contact
Operating Voltage	250 V AC
Operating Voltage	125 V DC (200 mA DC)
Operating current	3 A AC
Operating current	1 A DC (30 V DC)

Connection data

Connection Method	Screw connection
Screw thread	M3
Tightening torque	0.8 Nm
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section AWG	24 ... 12

Dimensions

Width	17.7 mm
Height	90 mm
Depth	74.5 mm (incl. DIN rail 7.5 mm)
Horizontal pitch	1 Div.

Material specifications

Flammability rating according to UL 94	V-0
CTI value of material	600
Insulating material	PA 6.6-FR 20% GF
Insulating material	PA 6.6-FR
Material group	I
Housing Material	PA 6.6-FR 20 % GF
Housing Material	PA 6.6-FR

Protective circuit

Mode of protection	L-N
Mode of protection	L-PE
Mode of protection	N-PE
Mode of protection	(L+) - (L-)
Mode of protection	(L+/L-) - PE
Direction of action	1L-N & N-PE
Nominal voltage U_N	230 V AC (TN-S)
Nominal voltage U_N	230 V AC (TT - only in use with RCD)
Nominal frequency f_N	50 Hz (60 Hz)
Maximum continuous voltage U_C	264 V AC
Maximum continuous voltage U_C	230 V DC
Rated load current I_L	26 A (30 °C)
Residual current I_PE	≤ 5 µA
Standby power consumption P_C	≤ 275.00 mVA (at UREF)
Standby power consumption P_C	≤ 300.00 mVA (at UC)
Reference test voltage U_REF	255.00 V AC
Nominal discharge current I_n (8/20) µs	3 kA
Combination wave U_OC	6 kV
Voltage protection level U_p (L-N)	≤ 1.35 kV
Voltage protection level U_p (L-PE)	≤ 1.5 kV
Voltage protection level U_p (N-PE)	≤ 1.5 kV
TOV behavior at U_T (L-N)	440 V AC (5 s / withstand mode)
TOV behavior at U_T (L-N)	440 V AC (120 min / withstand mode)
TOV behavior at U_T (L-PE)	440 V AC (5 s / withstand mode)
TOV behavior at U_T (L-PE)	440 V AC (120 min / withstand mode)
TOV behavior at U_T (L-PE)	1455 V AC (200 ms / safe failure mode)
TOV behavior at U_T (N-PE)	1200 V AC (200 ms / safe failure mode)
Response time t_A (L-N)	≤ 25 ns
Response time t_A (L-PE)	≤ 100 ns
Response time t_A (N-PE)	≤ 100 ns
Short-circuit current rating I_SCCR	1.5 kA AC
Short-circuit current rating I_SCCR	0.25 kA DC
Max. backup fuse with branch wiring	not required

Ambient conditions

Degree of Protection	IP20
Ambient Temperature (Operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (Operation)	5g (10 ... 150 Hz/20 cycles/axis/X, Y, Z)

UL specifications

Maximum continuous operating voltage MCOV	255 V AC
Maximum continuous operating voltage MCOV	230 V DC
Nominal discharge current I_n	3 kA
Mode of protection	L-N
Mode of protection	L-G
Mode of protection	N-G
Mode of protection	(L+) - (L-)
Mode of protection	(L+) - G
Mode of protection	(L-) - G
Nominal Voltage	230 V DC
Rated load current I_L	25 A
Power distribution system	Single phase
Nominal frequency	50/60 Hz
Measured limiting voltage MLV (L-N)	1290 V
Measured limiting voltage MLV (L-G)	1310 V
Measured limiting voltage MLV (N-G)	1310 V
Measured limiting voltage MLV (L+) - (L-)	1290 V
Measured limiting voltage MLV (L+) - G	1310 V
Measured limiting voltage MLV (L-) - G	1310 V
SPD Type	4CA

UL connection data

Tightening torque	5 lbf-in. ... 7 lbf-in.
Conductor cross section AWG	14 ... 12

Standards and Regulations

Standards/specifications	IEC 61643-11
Note	2011

EN 61643-11

Standards/specifications	EN 61643-11
Note	2012

Mounting

Mounting Type

DIN rail: 35 mm

Accessories

CLIPFIX 35
3022218 - Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
X-PEN 0,35
0811228 - Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm

Why Proax for Phoenix Contact PLT-SEC-T3-230-FM?

Proax is an authorized distributor of Phoenix Contact PLT-SEC-T3-230-FM and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time

Highly Trained Staff

Live Chat

Technical Support

Local Inventory

60+ Years Experience

Additional Information

Alternate Names	PLTSECT3230FM
Pack Size	1

Recommended

PLT-SEC-T3-230-FM-PT
2907928 - Type 2/3 surge protection, consisting of protective plug and base element with Push-in connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage: 230 V AC/DC
PLT-SEC-T3-230-FM-UT
2907919 - Type 2/3 surge protection, consisting of protective plug and base element with screw connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage: 230 V AC/DC
PLT-SEC-T3-230-P
2905235 - Replacement plug for type 3 device protection from the PLUGTRAB SEC T3 product range. 230 V nominal voltage.
PLT-SEC-T3-230-P-UT/PT
2907923 - Replacement plug for type 2/3 surge protection from the PLT-SEC-…-UT/PT product series. Nominal voltage 230 V.
PLT-SEC-T3-24-FM
2905223 - Pluggable device protection, according to type 3/class III, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with integrated surge-proof fuse and remote indication contact. Also suitable for DC applications.
PLT-SEC-T3-24-FM-PT
2907925 - Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 24 V AC/DC
PLT-SEC-T3-24-FM-UT
2907916 - Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 24 V AC/DC
PLT-SEC-T3-24-P
2905232 - Replacement plug for type 3 device protection from the PLUGTRAB SEC T3 product range. 24 V nominal voltage.
PLT-SEC-T3-24-P-UT/PT
2907920 - Replacement plug for type 3 surge protection from the PLT-SEC-…-UT/PT product series. Nominal voltage 24 V.
PLT-SEC-T3-120-FM
2905228 - Pluggable device protection, according to type 3/class III, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with integrated surge-proof fuse and remote indication contact. Also suitable for DC applications.
PLT-SEC-T3-120-FM-PT
2907927 - Type 2/3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 120 V AC/DC
PLT-SEC-T3-120-FM-UT
2907918 - Type 2/3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 120 V AC/DC
PLT-SEC-T3-120-P-UT/PT
2907922 - Replacement plug for type 2/3 surge protection from the PLT-SEC-…-UT/PT product series. Nominal voltage 120 V.
PLT-SEC-T3-60-FM
2905225 - Pluggable device protection, according to type 3/class III, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with integrated surge-proof fuse and remote indication contact. Also suitable for DC applications.
PLT-SEC-T3-60-FM-UT
2907917 - Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 60 V AC/DC
PLT-SEC-T3-60-P
2905233 - Replacement plug for type 3 device protection from the PLUGTRAB SEC T3 product range. 60 V nominal voltage.
PLT-SEC-T3-60-P-UT/PT
2907921 - Replacement plug for type 3 surge protection from the PLT-SEC-…-UT/PT product series. Nominal voltage 60 V.
PLT-SEC-T3-3S-230-FM
2905230 - Plug-in device protection, according to type 3/class III, for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), with integrated surge-proof fuse and remote indication contact.
PLT-SEC-T3-3S-230-P
2905236 - Replacement plug for type 3 device protection from the PLUGTRAB SEC T3 3S product range. 230 V nominal voltage.
PLT-SEC-T3-3S-BE
2905592 - Base element for protective plugs from the PLUGTRAB SEC product series with remote indication contact.

Available for order

Phoenix Contact Availability