Official DistributorSKU
MPN
1249516
Weight
0.154 kg
This product is Not Cancellable/Not Returnable
Series PSR-MM
PSR-MM35-1NO-1DO-24DC-SP - Safety relay module
Safety relay module for sensor-free speed and speed range monitoring up to SIL 3, Cat. 4, PL e, 2-channel evaluation of the rotating field of AC and three-phase motors, plug-in Push-in terminal block, width: 12.5 mm
- Safe motion monitoring based on sensor-free rotating field measurement of the drive
- Maximum system availability, robust measuring procedure in the face of interference factors such as shock, vibration, and EMI
- Integrated safety functions: SLS (Safe Limited Speed), SSM (Safe Speed Monitor), SSR (Safe Speed Range)
- Easy parameterization and online monitoring with the PSRmotion software, which can be downloaded free of charge
- 1 enabling current path, 1 parameterizable digital signal output
- Up to Cat. 4/PL e in accordance with EN ISO 13849-1, SIL 3 in accordance with EN IEC 62061
Technical Specifications
Product properties
| Application | Over-speed safety relay |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
Insulation characteristics: Air clearances and creepage distances between the power circuits
| Overvoltage category | II (600 V) |
| Overvoltage category | III (300 V) |
Times
| Typical response time | 70 ms (For Us autostart) |
| Typical response time | 70 ms (For Us manual, monitored start) |
| Delay time range | 0 s ... 2 s ±10 % (Switch-off delay) |
| Delay time range | 0 s ... 10 s ±10 % (Switch-on delay) |
| Restart time | < 5 s (Boot time) |
Electrical properties
| Maximum power dissipation for nominal condition | 3 W (At US = 26.4 V, IL² = 6 A²) |
| Nominal operating mode | 100% operating factor |
| Interfaces | Without sensor |
Air clearances and creepage distances between the power circuits
| Rated Insulation Voltage | 300 V (ÜKAT III) |
| Rated Insulation Voltage | 600 V (ÜKAT II) |
| Rated surge voltage/insulation | Basic insulation 4 kV between all current paths and housing |
| Rated surge voltage/insulation | Safe isolation, reinforced insulation 6 kV:between 13/14 and A1/A2, S34, MO |
| Rated surge voltage/insulation | Safe isolation, reinforced insulation 8 kV:between L1/L2/L3 and A1, A2, S34, MObetween L1/L2/L3 and 13/14 |
Supply
| Designation | A1/A2 |
| Rated control circuit supply voltage US | 20.4 V DC ... 26.4 V DC |
| Rated control circuit supply voltage US | 24 V DC -15 % / +10 % (provide external protection) |
| Rated control supply current IS | 46 mA |
| Power consumption at US | 1.1 W |
| Filter time | 20 ms (in the event of voltage dips at Us) |
| Protective circuit | Surge protection; Suppressor diode |
Digital: Digital input
| Description of the input | IEC 61131-2 type 1 |
| Number of Inputs | 1 (Non-safety-related parameterizable acknowledgment input: S34) |
| Input voltage range "0" signal | 0 V DC ... 5 V DC |
| Input voltage range "1" signal | 15 V DC ... 30 V DC |
| Input current range "0" signal | 0 mA ... 0.5 mA |
| Filter time | 20 ms (Test pulse width of low test pulses) |
| Max. permissible overall conductor resistance | 500 Ω (Input and reset circuit at US) |
| Protective circuit | 33 V suppressor diode |
| Current consumption | typ. 3 mA (at 24 V) |
Measurement
| Input name | Sensor inputs |
| Number of Inputs | 3 (Safety-related sensor inputs: L1 , L2 , L3) |
| Input voltage range "1" signal | 90 V AC ... 690 V AC |
| Precision | ± 1 % |
| Limit frequency | min. 0.5 Hz |
| Limit frequency | max. 1200 Hz |
| Current consumption | 0.35 mA |
Relay: Enabling current path
| Output description | 2 N/O contacts in series, floating |
| Number of Outputs | 1 (safety-related N/O contacts: 13/14) |
| Contact switching type | 1 enabling current path |
| Contact Material | AgSnO2 |
| Switching voltage | min. 12 V |
| Switching voltage | max. 250 V AC/DC |
| Switching capacity | min. 60 mW |
| Inrush Current | min. 3 mA |
| Inrush Current | max. 6 A |
| Switching capacity in accordance with IEC 60947-5-1 | 4 A (DC13, 24 V) |
| Switching capacity in accordance with IEC 60947-5-1 | 5 A (AC15, 250 V) |
| Limiting Continuous Current | 6 A |
| Sq. Total current | 36 A2 (observe derating) |
| Switching frequency | max. 0.5 Hz |
| Mechanical service life | 10x 106 cycles |
| Output fuse | 6 A gL/gG |
Signal
| Output description | PNP |
| Number of Outputs | 1 (Non-safety-related signal output: MO) |
| Voltage | 23 V DC (US - 1 V) |
| Current | max. 100 mA |
| Maximum Inrush Current | 500 mA |
| Switching frequency | 0.5 Hz (ohmic) |
| Protective circuit | Reverse polarity protection 33 V suppressor diode |
| Short-circuit protection | Yes |
Connection technology
| pluggable | yes |
Conductor connection
| Connection Method | Push-in connection |
| Conductor cross section rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 24 ... 16 |
| Stripping length | 8 mm |
Signaling
| Status display | 1 x green, red LED (OUT) |
| Operating voltage display | 1 x green, red LED (PWR) |
| Error indication | Red LED, (flashes in the event of short-circuits or overload) |
Dimensions
| Width | 12.5 mm |
| Height | 116.6 mm |
| Depth | 114.5 mm |
Material specifications
| Color (Housing) | yellow (RAL 1018) |
| Housing Material | Polyamide |
Safety data
| Stop category | 0 |
Safety data: EN ISO 13849
| Category | 4 |
| Performance level (PL) | e |
Safety data: IEC 61508 - High demand
| Safety Integrity Level (SIL) | 3 |
Safety data
| Safety Integrity Level (SIL) | 3 |
Safety data: EN IEC 62061
| Safety Integrity Level (SIL) | 3 |
Ambient conditions
| Degree of Protection | IP20 |
| Min. degree of protection of inst. location | IP54 |
| Ambient Temperature (Operation) | -20 °C ... 55 °C (observe derating) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Maximum altitude | ≤ 2000 m (Above sea level) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Shock | 15g |
| Vibration (Operation) | 10 Hz ... 150 Hz, 2g |
CE
| Certificate | CE-compliant |
Air clearances and creepage distances between the power circuits
| Standards/regulations | EN 60947-1 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | See derating curve |
| Mounting Position | vertical or horizontal |
Why Proax for Phoenix Contact PSR-MM35-1NO-1DO-24DC-SP?
Proax is an authorized distributor of Phoenix Contact PSR-MM35-1NO-1DO-24DC-SP and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | PSRMM351NO1DO24DCSP |
| Pack Size | 1 |
Recommended
1249515 - Safety relay module for sensor-free speed and speed range monitoring up to SIL 3, Cat. 4, PL e, 2-channel evaluation of the rotating field of AC and three-phase motors, plug-in screw terminal block, width: 12.5 mm
2702355 - Safety relay module for sensor-free zero-speed monitoring for 3- and 1-phase motors up to SIL 3, Cat. 3, PL e, 2-channel evaluation of the residual voltage of AC, three-phase, and DC motors, plug-in screw terminal block, width: 12.5 mm- 2702356 - Safety relay module for sensor-free zero-speed monitoring for 3- and 1-phase motors up to SIL 3, Cat. 3, PL e, 2-channel evaluation of the residual voltage of AC, three-phase, and DC motors, plug-in Push-in terminal block, width: 12.5 mm
2702357 - 2-channel over-speed and zero-speed safety relay up to SIL 3, Cat. 4, PL e, 2 safe relay outputs, suitable for connecting HTL, TTL, or sine/cosine encoders as well as proximity switches, plug-in screw terminal block, width: 22.5 mm
2702358 - 2-channel over-speed and zero-speed safety relay up to SIL 3, Cat. 4, PL e, 2 safe relay outputs, suitable for connecting HTL, TTL, or sine/cosine encoders as well as proximity switches, plug-in Push-in terminal block, width: 22.5 mm
2904953 - Safety relay for emergency stop and safety doors up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, manual, monitored start, cross-circuit detection, 1 enabling current path, US = 24 V DC, fixed screw terminal block
2904951 - Safety relay for emergency stop and safety doors up to SIL 1, Cat. 1, PL c, depending on the application up to SIL 3, Cat. 4, PL e, 1-channel operation, manual, monitored start, 1 enabling current path, US = 24 V DC, fixed screw terminal block
2904955 - Safety relay for emergency stop and safety doors up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, manual, monitored start, 1 enabling current path, US = 24 V DC, fixed screw terminal block
2904952 - Safety relay for emergency stop and safety doors up to SILCLSIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic start, cross-circuit detection, 1 enabling current path, US = 24 V DC, fixed screw terminal block
2702192 - Safety relay for failsafe controllers up to SILCL 3, Cat. 4, PL e, 1-channel operation, autostart, 1 enabling current path, US = 24 V DC in accordance with IEC 61131-6, fixed screw terminal block
2904950 - Safety relay for emergency stop and safety doors up to SIL 1, Cat. 1, PL c, depending on the application up to SIL 3, Cat. 4, PL e, 1-channel operation, automatic start, 1 enabling current path, US = 24 V DC, fixed screw terminal block
2904957 - Safety relay for monitoring non-equivalent signal generators up to SIL 3, Cat. 4, PL e, 2-channel, non-equivalent operation, manual, monitored start, 1 enabling current path, US = 24 V DC, fixed screw terminal block
2904954 - Safety relay for emergency stop and safety doors up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic start, 1 enabling current path, US = 24 V DC, fixed screw terminal block
2904956 - Safety relay for monitoring non-equivalent signal generators up to SIL 3, Cat. 4, PL e, 2-channel, non-equivalent operation, automatic start, 1 enabling current path, US = 24 V DC, fixed screw terminal block
2904958 - Safety relay for emergency stop, safety doors, and light grids up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic start, 2 enabling current paths (1-channel), US = 24 V DC, fixed screw terminal block