Official DistributorSKU
MPN
CAPAROC PM PN
Weight
0.178 kg
CAPAROC PM PN - Power module
Power module with PROFINET interface for supplying the CAPAROC circuit breaker system with 12 or 24 V DC. Additional system interface for communication with the power supply. For DIN rail installation via the CAPAROC current rails.
- The benchmark that you can customize by selecting single signals and resets all the way to PROFINET communication
- Particularly easy operation for everyone with tool-free assembly, direct feed-in to the busbar, and clear operating states
- Exceptionally easy design-in thanks to the comprehensive digital data packet and PROFINET function blocks
Technical Specifications
General
| Note | LABS release – in accordance with test specification VW PV 3.10.7:2005-0 |
| Note | When connecting the conductor, make sure that the CAPAROC modules are not pulled apart due to tensile force. Gaps must not be created between the modules. |
Product properties
| Product family | CAPAROC |
| Number of slots | 4 |
Insulation characteristics
| Protection class | III |
| Pollution degree | 2 |
PROFINET
| Device function | PROFINET device |
| Specification | PROFINET-IO RT/IRT, Spec. 2.x |
| Conformance class | Conformance-Class C |
| Redundancy | MRP (Media Redundancy Protocol) |
General
| Operating Voltage | 10 V DC ... 30 V DC |
| Rated voltage | 12 V DC |
| Rated voltage | 24 V DC |
| Rated current IN | 45 A DC (Total current input) |
| Rated surge voltage | 0.5 kV |
| Tripping method | E (electronic) |
| Feedback resistance | max. 35 V DC |
| Dielectric strength | 35 V DC (Load circuit) |
| Efficiency | > 99 % |
| Closed circuit current I0 | typ. 85 mA (no load at 24 V) |
| Power dissipation | typ. 2 W (no load at 24 V) |
| Power dissipation | < 3.6 W (at 40 A) |
| Temperature derating | 45 A (Total current at 35°C) |
| Temperature derating | 40 A (Total current at 40°C) |
| Temperature derating | 15 A (Total current at 50°C) |
| MTBF (IEC 61709, SN 29500) | 3985174.15 h (at 25 °C with 21 % load) |
| MTBF (IEC 61709, SN 29500) | 1760834.9 h (at 40°C with 34.25% load) |
| MTBF (IEC 61709, SN 29500) | 601892.76 h (at 35 °C with 100 % load) |
| Voltage drop | 0.048 V (at 40 A) |
Main circuit IN+
| Connection Method | Push-in connection |
| Stripping length | 18 mm |
| Conductor cross section AWG | 20 ... 8 |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.5 mm² ... 16 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.5 mm² ... 16 mm² |
Main circuit IN-
| Connection Method | Push-in connection |
| Stripping length | 18 mm |
| Conductor cross section AWG | 20 ... 8 |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.5 mm² ... 16 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.5 mm² ... 16 mm² |
System communication
| Connection Method | Push-in connection |
| Stripping length | 8 mm |
| Conductor cross section rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross section AWG | 24 ... 16 |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.2 mm² ... 0.75 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.2 mm² ... 1.5 mm² |
PROFINET
| Maximum system extension | ≤ 16 (CAPAROC modules alignable) |
| Interface type | Ethernet |
| Number | 2 |
| Transmission Speed | 100 Mbps (acc. to PROFINET standard) |
| Transmission physics | Ethernet in RJ45 twisted pair |
| Protocols Supported | PROFINET |
Signaling
| Connection X1 LED green | lit (connect) |
| Connection X1 LED yellow | lit (traffic) |
| Connection X2 LED green | lit (connect) |
| Connection X2 LED yellow | lit (traffic) |
| PROFINET bus fault (BF) LED red | lit (connection status not available) |
| PROFINET bus fault (BF) LED red | flashing (сonnection status OK, no communication connection to PROFINET controller) |
| PROFINET bus fault (BF) LED red | off (active communication connection to PROFINET controller) |
| PROFINET group error (SF) LED red | lit (PROFINET error) |
| PROFINET group error (SF) LED red | off (no PROFINET error) |
| PROFINET ready (RDY) LED green | lit (correct operation) |
| PROFINET ready (RDY) LED green | flashing (waiting for application startup) |
| PROFINET ready (RDY) LED green | off (operation not correct) |
| Power (PWR) LED green | lit (Supply voltage) |
| Power (PWR) LED red | lit (Supply voltage outside the nominal range) |
Dimensions
| Width | 24.8 mm |
| Height | 132.4 mm |
| Depth | 111.3 mm (incl. DIN rail 7.5 mm) |
Material specifications
| Color | light grey (RAL 7035) |
| Material | PA 6 |
| Material | PA 6 |
| Material | PA 6 |
| Material | PC |
| Flammability rating according to UL 94 | V-0 |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -30 °C ... 50 °C |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Altitude | ≤ 4000 m (amsl) |
| Humidity test | 96 h, 95 % RH, 40 °C |
| Shock (operation) | 30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27) |
| Shock (operation) | 25g (6 ms duration, half-sine shock pulse in accordance with IEC 60068-2-27, continuous shock) |
| Vibration (Operation) | 5g (10 ... 150 Hz / 10 cycles / axis / X, Y, Z) |
UL approval
| Identification | UL/C-UL Listed UL 508 |
| Identification | UL 121201 Class I, Division 2, Groups A, B, C, D, T4A |
Corrosive gas test
| Identification | ISA S71.04.2013 G3 Harsh Group A |
Standards and Regulations
| Standards/specifications | EN 61000-6-2 |
| Note | EMC – Immunity for industrial areas |
| Standards/specifications | EN 61000-6-3 |
| Note | EMC – Emission for residential, business and commercial properties and small operations |
| Standards/specifications | EN 60068-2-78 |
| Note | Environmental influences – Moisture and heat, constant |
| Standards/specifications | EN 50178 |
| Note | Equipping power installations with electronic equipment |
| Standards/specifications | EN 60068-2-6 |
| Note | Environmental influences – Vibrations (sinusoidal) |
| Standards/specifications | EN 60068-2-27 |
| Note | Environmental influences – Shocks |
Mounting
| Mounting Type | pluggable onto CAPAROC CR… current rail |
Why Proax for Phoenix Contact 1110986?
Proax is an authorized distributor of Phoenix Contact 1110986 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
Power module with IO-Link interface for supplying the CAPAROC circuit breaker system with 12 or 24 V DC for up to 20 channels. For DIN rail installation via the CAPAROC current rails.
CAPAROC PM S-R - Power module with status output and reset input for supplying the CAPAROC circuit breaker system with 12 or 24 V DC. For DIN rail installation via the CAPAROC current rails.
CAPAROC PM S-R EX - Power module with status output and reset input for supplying the CAPAROC circuit breaker system with 12 V DC or 24 V DC. EX e approval for zone 2. For DIN rail installation via the CAPAROC current rails.
CAPAROC PD 0V - Potential distributor with Push-in connections for directly connecting the 0 V return conductor in the CAPAROC system. For DIN rail installation via the CAPAROC current rails.
CAPAROC CR EXT8 - Extension busbar with 8 slots for CAPAROC system. For installation on a DIN rail.
CAPAROC CR EXT4 - Extension busbar with 4 slots for the CAPAROC system. For installation on a DIN rail.
CAPAROC CR EXT20 - Extension busbar with 20 slots for the CAPAROC system. For installation on a DIN rail.
CAPAROC E4 12-24DC/1-10A - Four-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 1 A to 10 A via LED button. For DIN rail installation via the CAPAROC current rails.
CAPAROC E4 12-24DC/1-4A - Four-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 1 A to 4 A via LED button. For DIN rail installation via the CAPAROC current rails.
CAPAROC E2 12-24DC/2-10A - 2-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 2 A to 10 A via step switch. For DIN rail installation via the CAPAROC current rails.
CAPAROC E2 12-24DC/2-10A EX - 2-channel electronic circuit breaker module for protecting 12 V DC and 24 V DC loads against overload and short circuit. Nominal current adjustable from 2 A to 10 A via step switch. EX e approval for zone 2. For DIN rail installation via the CAPAROC current rails.
CAPAROC E2 12-24DC/1-4A - 2-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 1 A to 4 A via step switch. For DIN rail installation via the CAPAROC current rails.
CAPAROC E2 12-24DC/1-4A EX - 2-channel electronic circuit breaker module for protecting 12 V DC and 24 V DC loads against overload and short circuit. Nominal current adjustable from 1 A to 4 A via step switch. EX e approval for zone 2. For DIN rail installation via the CAPAROC current rails.
CAPAROC E1 12-24DC/8A - 1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails.
CAPAROC E1 12-24DC/6A - 1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails.
CAPAROC E1 12-24DC/4A - 1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails.
CAPAROC E1 12-24DC/2A - 1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails.
