![Phoenix Contact CAPAROC E2 12-24DC/2-10A](https://proax.ca/images/products/phoenix-contact/PHX-259432.jpg)
SKU
MPN
1110984
Weight
0.097 kg
Series CAPAROC-E
CAPAROC E2 12-24DC/2-10A - Electronic circuit breaker
2-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 2 A to 10 A via step switch. For DIN rail installation via the CAPAROC current rails.
- The benchmark that you can customize with convenient nominal current level setting on the module
- Easy operation for everyone through tool-free assembly, uninterrupted installation, and transparent operating state
- Exceptionally easy design-in allows the nominal current to be extended beyond the specified levels via PROFINET
Technical Specifications
General
Note | LABS release – in accordance with test specification VW PV 3.10.7:2005-0 |
Note | When connecting the conductor, make sure that the CAPAROC modules are not pulled apart due to tensile force. Gaps must not be created between the modules. |
Product properties
Product family | CAPAROC |
Number of Positions | 1 |
No. of channels | 2 |
Number of slots | 2 |
Insulation characteristics
Protection class | III |
Pollution degree | 2 |
General
Operating Voltage | 10 V DC ... 30 V DC |
Rated voltage | 12 V DC |
Rated voltage | 24 V DC |
Rated current IN | 10 A DC (per channel) |
Rated current IN | 2 / 4 / 6 / 8 / 10 A DC (Adjustable via rotary coding switches) |
Rated current IN | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 A DC (can be set, in RC mode via power module with communication interface) |
Rated current (pre-adjusted) | 2 A |
Rated surge voltage | 0.5 kV |
Tripping method | E (electronic) |
Feedback resistance | max. 35 V DC |
Switch-on delay | 50 ms (each channel preset by default) |
Switch-on delay | can be adapted with CAPAROC PM IOL and CAPAROC PM PN power modules |
Required backup fuse | Only required if Imax of the power supply > the short-circuit switching capacity. Integrated failsafe element. |
Short-circuit switching capacity | 300 A |
Dielectric strength | 35 V DC (Load circuit) |
Active current limitation | typ. 2.0 x IN at IN ≤ 3 A |
Active current limitation | typ. 1.5 x IN at IN ≥ 4 A |
Fuse | electronic |
Efficiency | > 99 % |
Closed circuit current I0 | typ. 25 mA (no load at 24 V) |
Power dissipation | typ. 0.6 W (no load at 24 V) |
Power dissipation | < 3.3 W (in nominal operation at 24 V and 10 A) |
Measuring tolerance I | ± 10 % (typ.) |
Temperature derating | 20 A (Total current at 40°C) |
Temperature derating | 10 A (Total current at 65 °C) |
MTBF (IEC 61709, SN 29500) | 11140621 h (at 25 °C with 21 % load) |
MTBF (IEC 61709, SN 29500) | 4699883 h (at 40°C with 34.25% load) |
MTBF (IEC 61709, SN 29500) | 534110 h (at 40°C with 100% load) |
Voltage drop | 0.14 V (at 10 A) |
Fail-safe element | 15 A DC (per output channel) |
Load circuit
Shutdown time | 5 s (for overload 1.1…1.3 x IN at IN ≥ 4 A) |
Shutdown time | 5 s (for overload 1.1…1.7 x IN at IN < 4 A) |
Shutdown time | typ. 400 ms (max. 450 ms for high starting currents) |
Shutdown time | typ. 20 ms (for short circuit > 1,5 x IN) |
Undervoltage switch-off | ≤ 8.5 V DC (active) |
Undervoltage switch-off | ≥ 9.2 V DC (inactive) |
Overvoltage switch-off | ≥ 32.5 V DC (active) |
Overvoltage switch-off | ≤ 30.5 V DC (inactive) |
Max. capacitive load | ≤ 75000 µF (Depending on the current setting and the short-circuit current available) |
Fuse-protected output
Connection Method | Push-in connection |
Stripping length | 10 mm |
Conductor cross section flexible | 0.2 mm² ... 4 mm² |
Conductor cross section rigid | 0.2 mm² ... 4 mm² |
Conductor cross section AWG | 24 ... 12 |
Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 4 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 4 mm² |
Signaling
Channel LED off | off (Channel switched off) |
Channel LED yellow | lit (Channel switched on, channel load > 80% ) |
Channel LED yellow | two flashes (Check the installation, no communication to power module) |
Channel LED green | lit (Channel switched on) |
Channel LED green | flashing (Channel switched on, coding switch position is not equal to set value) |
Channel LED red | lit (Channel switched off, over- or undervoltage active) |
Channel LED red | ON temporarily (Channel switched off, 5 s cool-down phase, overload or short-circuit release) |
Channel LED red | flashing (Channel switched off, ready to be switched back on, overload or short-circuit release) |
Channel LED red | two flashes (Channel switched off, system total current limit exceeded) |
Channel LED red-yellow | flashing (Channel is overloaded and is switched off) |
Channel LED red-green | flashing (Channel switched off, programming mode active, current adjustment after overload or short-circuit release) |
Dimensions
Width | 12.4 mm |
Height | 132.4 mm |
Depth | 111.3 mm (incl. DIN rail 7.5 mm) |
Material specifications
Color | light grey (RAL 7035) |
Material | PA 6 |
Material | PA 6 |
Material | PA 6 |
Material | PC |
Flammability rating according to UL 94 | V-0 |
Ambient conditions
Degree of Protection | IP20 |
Ambient Temperature (Operation) | -30 °C ... 65 °C (The temperature range of the power module must be taken into consideration) |
Ambient temperature (storage/transport) | -40 °C ... 70 °C |
Altitude | ≤ 4000 m (amsl) |
Humidity test | 96 h, 95 % RH, 40 °C |
Shock (operation) | 30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27) |
Shock (operation) | 25g (6 ms duration, half-sine shock pulse in accordance with IEC 60068-2-27, continuous shock) |
Vibration (Operation) | 5g (10 ... 150 Hz / 10 cycles / axis / X, Y, Z) |
UL approval
Identification | UL/C-UL Listed UL 508 |
Identification | UL Recognized UL 2367 |
Identification | UL 121201 Class I, Division 2, Groups A, B, C, D, T4A |
Corrosive gas test
Identification | ISA S71.04.2013 G3 Harsh Group A |
Standards and Regulations
Standards/specifications | EN 61000-6-2 |
Note | EMC – Immunity for industrial areas |
Standards/specifications | EN 61000-6-3 |
Note | EMC – Emission for residential, business and commercial properties and small operations |
Standards/specifications | EN 60068-2-78 |
Note | Environmental influences – Moisture and heat, constant |
Standards/specifications | EN 50178 |
Note | Equipping power installations with electronic equipment |
Standards/specifications | EN 60068-2-6 |
Note | Environmental influences – Vibrations (sinusoidal) |
Standards/specifications | EN 60068-2-27 |
Note | Environmental influences – Shocks |
Mounting
Mounting Type | pluggable onto CAPAROC CR… current rail |
Why Proax for Phoenix Contact CAPAROC E2 12-24DC/2-10A?
Proax is an authorized distributor of Phoenix Contact CAPAROC E2 12-24DC/2-10A and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Alternate Names | CAPAROCE21224DC210A |
Pack Size | 1 |
Recommended