Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
RIF-RPT-LDP-24DC/1X2/3X1/AU/FG
Weight
0.076 kg

RIF-RPT-LDP-24DC/1X2/3X1/AU/FG - Relay Module

Relay module with Push-in connection, consisting of: relay base with status LED, freewheeling diode, and retaining bracket, safety relay with force-guided contacts in accordance with DIN EN 61810-3, contact switching type: 3 N/O contacts and 1 N/C contact, input voltage: 24 V DC

Technical Specifications

Product properties

Product familyRIFLINE complete
ApplicationForcibly guided contacts
Operating mode100% operating factor
Mechanical service lifeapprox. 10⁷ cycles
B10d810000 Cycles (AC15, 250 V / 0.5 A, 1 NO)
B10d170000 Cycles (AC15; 250 V / 2 A; 1 NO)
B10d318000 Cycles (DC13, 24 V / 1 A, 1 NO)
B10d208000 Cycles (DC13, 24 V / 2 A, 1 NO)

Insulation characteristics: Air clearances and creepage distances between the power circuits

InsulationBasic insulation
InsulationSafe isolation, reinforced insulation and 6 kV between coil and contact circuit and between contacts 11-12 and 13-14, 41-42 to 23-24, 33-34
Overvoltage categoryIII
Pollution degree2

Electrical properties

Maximum power dissipation for nominal condition0.41 W
Test voltage (Winding/contact)4 kVrms (50 Hz, 1 min., winding/contact)
Test voltage ()1.5 kVrms (50 Hz, 1 min., open contact)
Test voltage ()2.5 kVrms (50 Hz, 1 min., between contacts: 7, 8 to 9, 10)
Test voltage ()4 kVrms (50 Hz, 1 min., between contacts: all others)

Air clearances and creepage distances between the power circuits

Rated Insulation Voltage250 V AC (Input/output)
Rated surge voltage6 kV (Input/output)

Short-circuit protection device

Current10 A (RT28-32)
Voltage500 V (SCPD)
Short-circuit current1 kA (conditional short-circuit current)

Coil side

Nominal operating voltage UN24 V DC
Input voltage range in reference to UNSee derating diagram
Drive and functionmonostable
Drive (polarity)polarized
Typical input current at UN17 mA
Input power dissipation for UN0.4 W
Typical response time10 ms
Typical release time15 ms
Coil Voltage24 V DC
Protective circuitFreewheeling diode
Status displayYellow LED

Switching

Contact switching type3 N/O contacts, 1 N/C contact
Type of switch contactSingle contact
Contact MaterialAgSnO, hard gold-plated
Maximum Switching Voltage250 V AC
Maximum Switching Voltage300 V DC
Minimum Switching Voltage10 V (5 mA)
Limiting Continuous Current6 A
Maximum Inrush Current35 A (20 ms)
Min. switching current5 mA (10 V)
Interrupting rating (ohmic load) max.144 W (24 V DC)
Interrupting rating (ohmic load) max.100 W (48 V DC)
Interrupting rating (ohmic load) max.75 W (60 V DC)
Interrupting rating (ohmic load) max.55 W (110 V DC)
Interrupting rating (ohmic load) max.50 W (220 V DC)
Interrupting rating (ohmic load) max.1500 VA (250 V AC)
Force-guided contacts in accordance with EN 61810-3Type A
Utilization category CB Scheme (IEC 60947-5-1)AC15, 2 A/240 V (N/O contact)
Utilization category CB Scheme (IEC 60947-5-1)DC13, 2 A/24 V (N/O contact)

Connection data

Connection MethodPush-in connection
Stripping length8 mm
Conductor cross section rigid0.14 mm² ... 1.5 mm²
Conductor cross section flexible0.14 mm² ... 1.5 mm²
Conductor cross section flexible0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross section flexible0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
Conductor cross section AWG26 ... 16 (solid)
Conductor cross section AWG26 ... 16 (flexible)

Dimensions

Width21 mm
Height96 mm
Depth67 mm

Material specifications

Flammability rating according to UL 94V2 (Housing)

Ambient conditions

Degree of protection (Relay base)IP20 (Relay base)
Degree of protection (Relay)RT II (Relay)
Degree of protection (Installation location)IP54 (Installation location)
Ambient Temperature (Operation)-40 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Altitude≤ 2000 m

UKCA

CertificateUKCA-compliant

All specifications in accordance with the standard

Standards/regulationsIEC 60947-5-1
Standards/regulationsIEC 61810-3

Air clearances and creepage distances between the power circuits

Standards/regulationsEN 61810-1

Mounting

Mounting TypeDIN rail mounting
Assembly instructionsin rows with zero spacing
Mounting Positionany
Accessories

Why Proax for Phoenix Contact 1148703?

Proax is an authorized distributor of Phoenix Contact 1148703 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability