
SKU
MPN
RIF-RPT-LDP-24DC/2X2/2X1/AU/FG
Weight
0.075 kg
Series RIF-RPT-LDP
RIF-RPT-LDP-24DC/2X2/2X1/AU/FG - Relay Module
Relay module with Push-in connection, consisting of: relay base with status LED, freewheeling diode, and retaining bracket, safety relay with force-guided contacts in accordance with DIN EN 61810-3, contact switching type: 2 N/O contacts and 2 N/C contacts, input voltage: 24 V DC
Technical Specifications
Product properties
Product family | RIFLINE complete |
Application | Forcibly guided contacts |
Operating mode | 100% operating factor |
Mechanical service life | approx. 10⁷ cycles |
B10d | 810000 Cycles (AC15, 250 V / 0.5 A, 1 NO) |
B10d | 170000 Cycles (AC15; 250 V / 2 A; 1 NO) |
B10d | 318000 Cycles (DC13, 24 V / 1 A, 1 NO) |
B10d | 208000 Cycles (DC13, 24 V / 2 A, 1 NO) |
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation | Basic insulation |
Insulation | Safe isolation, reinforced insulation and 6 kV between coil and contact circuit and between contacts 11-12 and 13-14, 41-42 to 23-24, 33-34 |
Overvoltage category | III |
Pollution degree | 2 |
Electrical properties
Maximum power dissipation for nominal condition | 0.41 W |
Test voltage (Winding/contact) | 4 kVrms (50 Hz, 1 min., winding/contact) |
Test voltage () | 1.5 kVrms (50 Hz, 1 min., open contact) |
Test voltage () | 2.5 kVrms (50 Hz, 1 min., between contacts: 7, 8 to 9, 10) |
Test voltage () | 4 kVrms (50 Hz, 1 min., between contacts: all others) |
Air clearances and creepage distances between the power circuits
Rated Insulation Voltage | 250 V AC (Input/output) |
Rated surge voltage | 6 kV (Input/output) |
Short-circuit protection device
Current | 10 A (RT28-32) |
Voltage | 500 V (SCPD) |
Short-circuit current | 1 kA (conditional short-circuit current) |
Coil side
Nominal operating voltage UN | 24 V DC |
Input voltage range in reference to UN | See derating diagram |
Drive and function | monostable |
Drive (polarity) | polarized |
Typical input current at UN | 17 mA |
Input power dissipation for UN | 0.4 W |
Typical response time | 10 ms |
Typical release time | 15 ms |
Coil Voltage | 24 V DC |
Protective circuit | Freewheeling diode |
Status display | Yellow LED |
Switching
Contact switching type | 2 N/O contacts, 2 N/C contacts |
Type of switch contact | Single contact |
Contact Material | AgSnO, hard gold-plated |
Maximum Switching Voltage | 250 V AC |
Maximum Switching Voltage | 300 V DC |
Minimum Switching Voltage | 10 V (5 mA) |
Limiting Continuous Current | 6 A |
Maximum Inrush Current | 35 A (20 ms) |
Min. switching current | 5 mA (10 V) |
Interrupting rating (ohmic load) max. | 144 W (24 V DC) |
Interrupting rating (ohmic load) max. | 100 W (48 V DC) |
Interrupting rating (ohmic load) max. | 75 W (60 V DC) |
Interrupting rating (ohmic load) max. | 55 W (110 V DC) |
Interrupting rating (ohmic load) max. | 50 W (220 V DC) |
Interrupting rating (ohmic load) max. | 1500 VA (250 V AC) |
Force-guided contacts in accordance with EN 61810-3 | Type A |
Utilization category CB Scheme (IEC 60947-5-1) | AC15, 2 A/240 V (N/O contact) |
Utilization category CB Scheme (IEC 60947-5-1) | DC13, 2 A/24 V (N/O contact) |
Connection data
Connection Method | Push-in connection |
Stripping length | 8 mm |
Conductor cross section rigid | 0.14 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve) |
Conductor cross section flexible | 0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block) |
Conductor cross section AWG | 26 ... 16 (solid) |
Conductor cross section AWG | 26 ... 16 (flexible) |
Dimensions
Width | 21 mm |
Height | 96 mm |
Depth | 67 mm |
Material specifications
Flammability rating according to UL 94 | V2 (Housing) |
Ambient conditions
Degree of protection (Relay base) | IP20 (Relay base) |
Degree of protection (Relay) | RT II (Relay) |
Degree of protection (Installation location) | IP54 (Installation location) |
Ambient Temperature (Operation) | -40 °C ... 60 °C |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Altitude | ≤ 2000 m |
UKCA
Certificate | UKCA-compliant |
All specifications in accordance with the standard
Standards/regulations | IEC 60947-5-1 |
Standards/regulations | IEC 61810-3 |
Air clearances and creepage distances between the power circuits
Standards/regulations | EN 61810-1 |
Mounting
Mounting Type | DIN rail mounting |
Assembly instructions | in rows with zero spacing |
Mounting Position | any |
Accessories
Why Proax for Phoenix Contact 1148699?
Proax is an authorized distributor of Phoenix Contact 1148699 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended