Official Distributor
SKU
MPN
2700804
Weight
0.422 kg
Series IB-IL
IB IL 24 PSDO 4/4-R-PAC - Safety module
I/O component, safety-related, digital output module with 4 safe outputs, positive and negative switching; for the SafetyBridge system, PROFIsafe, and INTERBUS-Safety; up to SIL 3, Cat. 4/PL e, plug-in spring-cage connection with discharge plugs
Technical Specifications
Dimensions
Width | 48.8 mm |
Height | 119.8 mm |
Depth | 71.5 mm |
Note on dimensions | Housing dimensions |
Inline local bus
No. of channels | 2 |
Connection Method | Inline data jumper |
Transmission Speed | 500 kbps / 2 Mbps |
Module
ID code (dec.) | 167 |
ID code (hex) | A7 |
Length code (hex) | 04 |
Length code (dec) | 04 |
Process data channel | 8 Byte |
Input address area | 8 Byte ((Operating mode: SafetyBridge)) |
Output address area | 8 Byte ((Operating mode: SafetyBridge)) |
Register length | 8 Byte |
Required parameter data | 1 Byte ((Operating mode: SafetyBridge)) |
Required configuration data | 5 Byte ((Operating mode: SafetyBridge)) |
Digital:
Output name | Digital outputs |
Output description | +/- switching |
Connection Method | Spring-cage connection |
Connection technology | 2-, 3-, 4-conductor |
Number of Outputs | 4 (for 2-channel assignment, +/- switching) |
Number of Outputs | 4 (for 1-channel assignment, + switching) |
Number of Outputs | 4 |
Protective circuit | Overload protection, short-circuit protection of outputs |
Output Voltage | 24 V DC (US - 1 V) |
Output Current | max. 3 A (Total current of all outputs) |
Maximum Output Current per channel | 2 A |
Maximum Output Current per module | 3 A (See technical data) |
Nominal Output Voltage | 24 V DC |
Behavior with inductive overload | Output can be destroyed |
Product properties
Product family | Inline |
Application | Functional safety |
Type | modular |
Diagnostics messages | Short-circuit or overload of the digital outputs Error message in diagnostics code (bus) and display by means of the LED on the motor |
Electrical properties
Maximum power dissipation for nominal condition | 75 W |
Transmission medium | Copper |
Potentials: Communications power (UL)
Supply Voltage | 7.5 V DC (see safety data) |
Current draw | max. 230 mA |
Potentials: Main circuit supply (UM)
Supply Voltage | 24 V DC |
Supply Voltage Range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
Current draw | max. 3.03 A |
Current draw | typ. 30 mA (all outputs set including actuator current) |
Potentials: Segment circuit supply (US)
Supply Voltage | 24 V |
Supply: Module electronics
Supply Voltage | 24 V DC (via voltage jumper) |
Supply Voltage Range | 19.2 V DC ... 30 V DC |
Electrical isolation/isolation of the voltage ranges
Test voltage: 5 V supply, incoming remote bus/7.5 V supply (bus logics) | 500 V AC, 50 Hz, 1 min. |
Test voltage: 5 V supply, outgoing remote bus/7.5 V supply (bus logics) | 500 V AC, 50 Hz, 1 min. |
Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O) | 500 V AC, 50 Hz, 1 min. |
Test voltage: 24 V supply (I/O) / functional ground | 500 V AC, 50 Hz, 1 min. |
Connection technology
Connection name | Inline connector |
pluggable | yes |
Conductor connection
Connection Method | Spring-cage connection |
Conductor cross section rigid | 0.2 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.2 mm² ... 1.5 mm² |
Conductor cross section AWG | 24 ... 16 |
Inline connector
Connection Method | Spring-cage connection |
Conductor cross section, rigid | 0.2 mm² ... 1.5 mm² |
Conductor cross section, flexible | 0.2 mm² ... 1.5 mm² |
Conductor cross section AWG | 24 ... 16 |
Ambient conditions
Ambient Temperature (Operation) | -25 °C ... 55 °C |
Degree of Protection | IP20 |
Air pressure (operation) | 80 kPa ... 108 kPa (up to 2000 m above sea level) |
Air pressure (storage/transport) | 66 kPa ... 108 kPa (up to 3500 m above sea level) |
Ambient temperature (storage/transport) | -25 °C ... 70 °C |
Permissible humidity (operation) | 10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.) |
Permissible humidity (storage/transport) | 10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.) |
Standards and Regulations
Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Mounting
Mounting Type | DIN rail mounting |
Why Proax for Phoenix Contact IB IL 24 PSDO 4/4-R-PAC?
Proax is an authorized distributor of Phoenix Contact IB IL 24 PSDO 4/4-R-PAC and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Alternate Names | IBIL24PSDO44RPAC |
Pack Size | 1 |
Recommended