The figure shows the version IB IL 24 PWR IN-PAC
Official DistributorSKU
MPN
2862152
Weight
0.089 kg
This product is Not Cancellable/Not Returnable
Series IB-IL
IB IL 24 PWR IN/2-F-D-PAC - Power module
Inline power terminal block, complete with accessories (connector and labeling field), 24 V DC, with fuse (Main and segment voltage) and diagnostics
- Supply of the 24 V main voltage UM
- Provision of the 24 V segment voltage US
- Main and segment circuits protected by an internal fuse
Technical Specifications
Dimensions
| Width | 12.2 mm |
| Height | 119.8 mm |
| Depth | 71.5 mm |
Utilization restriction
| CCCex note | Use in potentially explosive areas is not permitted in China. |
Inline local bus
| Number of interfaces | 2 |
| Connection Method | Inline data jumper |
| Transmission Speed | 500 kbps |
Module
| ID code (dec.) | 190 |
| ID code (hex) | BE |
| Length code (hex) | C2 |
| Length code (dec) | 194 |
| Process data channel | 2 bit |
| Input address area | 2 bit |
| Output address area | 0 bit |
| Register length | 2 bit |
| Required parameter data | 1 Byte |
| Required configuration data | 4 Byte |
Product properties
| Product family | Inline |
| Type | modular |
| Number of plugs | 1 |
| Operating mode | Process data mode with 2 bits |
| Special Properties | 24 V DC |
| Special Properties | UM, US |
| Special Properties | With fuse (UM, US) |
| Special Properties | With diagnostics |
Insulation characteristics
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Electrical properties
| Test section | 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min. |
| Test section | 24 V supply (I/O) / functional ground 500 V AC 50 Hz 1 min. |
| Test section | 7.5 V supply (bus logic)/functional ground 500 V AC 50 Hz 1 min. |
| Protective circuit | Surge protection; Suppressor diode |
| Protective circuit | Reverse polarity protection; Parallel polarity protection diode |
| Protective circuit | Overload protection, short-circuit protection in the main and segment circuits; Fuse 5x20 with 6.3 A slow-blowFuses with other values can also be used. The maximum fuse value is 6.3 A.For fuses with a value greater than 2 A, only slow-blow fuses may be used. |
| Fuse | SI 5 x 20 6, 300 AT (in scope of delivery) |
Supply
| I/O voltage | 24 V DC |
| I/O voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Residual ripple | ± ±5 % |
| Max. current consumption | 4 A |
| Typical current consumption | 30 mA |
Potentials: Communications power (UL)
| Supply Voltage | 7.5 V DC (via voltage jumper) |
| Current draw | max. 25 mA |
| Power consumption | max. 0.19 W |
Potentials: Main circuit supply (UM)
| Supply Voltage | 24 V DC (via Inline connector) |
| Supply Voltage Range | 19.2 V ... 30 V (including all tolerances, including ripple) |
| Current draw | typ. 4 A (nominal value) |
Potentials: Segment circuit supply (US)
| Supply Voltage | 24 V DC |
| Supply Voltage Range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current draw | typ. 4 A (nominal value) |
Connection technology
| Connection name | Inline connector |
Conductor connection
| Connection Method | Spring-cage connection |
| Conductor cross section rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
| Stripping length | 8 mm |
Inline connector
| Connection Method | Spring-cage connection |
| Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
| Stripping length | 8 mm |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -25 °C ... 55 °C |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Mounting
| Mounting Type | DIN rail mounting |
Accessories
Why Proax for Phoenix Contact IB IL 24 PWR IN/2-F-D-PAC?
Proax is an authorized distributor of Phoenix Contact IB IL 24 PWR IN/2-F-D-PAC and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | IBIL24PWRIN2FDPAC |
| Pack Size | 1 |
Recommended
2860280 - Inline power terminal block, without accessories, 24 V DC, with fuse (Main and segment voltage) and diagnostics
2862136 - Inline power terminal, complete with accessories (connector and labeling field), 24 V DC, with fuse (main and segment voltage)- 2860015 - Inline power terminal block, without accessories, 24 V DC, with fuse (Main and segment voltage)
- 2861195 - Inline power terminal block, without accessories, 24 V DC, with fuse (Main and segment voltage) and diagnostics, transmission speed 2 Mbaud
- 2863012 - Inline power terminal block, without accessories, 24 V DC, with fuse (Main and segment voltage) and diagnostics, transmission speed 2 Mbaud
- 2863821 - Inline power terminal, complete with accessories (connector and marking field), 24 V DC, with fuse (main and segment voltage) and diagnostics, transmission speed 2 Mbps
- 2863782 - Inline power terminal block, without accessories, 24 V DC, with fuse (Main and segment voltage) and diagnostics
- 2863834 - Inline power terminal, complete with accessories (connector and marking field), 24 V DC, with fuse (main and segment voltage) and diagnostics, transmission speed 2 Mbps
- 2861894 - Inline power terminal block, complete with accessories (connector and labeling field), 24 V DC, with fuse (Main voltage) and diagnostics
- 2836667 - Inline power terminal block, without accessories, 24 V DC, with fuse (Main voltage) and diagnostics
- 2861438 - Inline power terminal block, complete with accessories (connector and labeling field), 24 V DC, with fuse (Main voltage)
- 2727909 - Inline power terminal block, without accessories, 24 V DC, with fuse (Main voltage)
- 2861027 - Inline power terminal without fuse in acc. with the requirements of Germanic Lloyd (GL)
2861674 - Inline power terminal or boost terminal, complete with accessories (connector and labeling field), 24 V DC, without fuse
2693020 - Inline boost terminal for the communications power UL of 0.8 A, complete with accessories (connectors and labeling field)
2819464 - Inline power terminal, without accessories, 24 V DC, for system voltages UM, US, UL, UANA- 2863135 - Inline power terminal, complete with accessories (connection plug and labeling field), 24 V DC, for system voltages UM, US, UL, UANA
- 2861331 - Inline power terminal, complete with accessories (connector and labeling field), 24 V DC, without fuse
- 2701161 - Inline power terminal, version for extreme conditions, complete with accessories (connector and labeling field), 24 V DC, without fuse