2902935
Official DistributorSKU
PHX2902935
MPN
PSR-SCP-42-230UC/URM4/4X1/2X2B
Weight
0.239 kg
Series PSR-SCP
PSR-SCP-42-230UC/URM4/4X1/2X2B - Extension module
1- or 2-channel contact extension with wide range input, 4 N/O contacts, 1 N/C contact, 1 confirmation current path, together with basic device up to Cat. 4, PL e in accordance with EN ISO 13849, plug-in screw terminal block, width: 22.5 mm
Technical Specifications
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Product properties
| Product family | PSRclassic |
| Application | Extension module |
| Mechanical service life | 10x 10⁶ cycles |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
Electrical properties
| Maximum power dissipation for nominal condition | 1.8 W |
| Nominal operating mode | 100% operating factor |
Air clearances and creepage distances between the power circuits
| Rated Insulation Voltage | 250 V AC |
| Rated surge voltage/insulation | Basic insulation 4 kV:between all current paths and housingSafe isolation, reinforced insulation 6 kV:between A1/A2 and 13/14, 23/24, 33/34, 43/44between 51/52, 61/62 and 13/14, 23/24, 33/34, 43/44between A1/A2 and 51/52, 61/62 |
General
| Power consumption at US | typ. 1.68 W (42 V DC) |
| Power consumption at US | typ. 4.6 W (230 V AC) |
| Control supply voltage range | 42 V AC/DC ... 230 V AC/DC -15 % ... +10 % (Rated control circuit supply voltage US) |
| Rated control supply current IS | 40 mA (42 V DC) |
| Rated control supply current IS | 20 mA (230 V AC) |
| Inrush Current | 15 A (Δt = 100 μs at Us) |
| Typ. starting time with Us | < 55 ms (when controlled via A1) |
| Typical release time | < 20 ms (Control via A1 at 42 V DC) |
| Typical release time | < 30 ms (Control via A1 at 48 V DC) |
| Typical release time | < 40 ms (Control via A1 at 60 V DC) |
| Typical release time | < 60 ms (Control via A1 at 110 V AC) |
| Typical release time | < 150 ms (Control via A1 at 230 V AC) |
| Recovery time | < 1 s |
| Maximum switching frequency | 0.5 Hz |
| Protective circuit | Surge protection; Suppressor diode and varistors |
| Operating voltage display | 1 x green LED |
Output data
| Contact switching type | 4 enabling current paths |
| Contact switching type | 1 confirmation current path |
| Contact switching type | 1 signaling current path |
| Contact Material | AgSnO2 |
| Maximum Switching Voltage | 250 V AC/DC (Observe the load curve) |
| Minimum Switching Voltage | 5 V AC/DC |
| Limiting Continuous Current | 6 A (N/O contact, pay attention to the derating) |
| Limiting Continuous Current | 6 A (N/C contact) |
| Maximum Inrush Current | 8 A |
| Inrush current, minimum | 10 mA |
| Sq. Total current | 36 A2 (observe derating) |
| Interrupting rating (ohmic load) max. | 144 W (24 V DC, τ = 0 ms) |
| Interrupting rating (ohmic load) max. | 288 W (48 V DC, τ = 0 ms) |
| Interrupting rating (ohmic load) max. | 180 W (60 V DC, τ = 0 ms) |
| Interrupting rating (ohmic load) max. | 77 W (110 V DC, τ = 0 ms) |
| Interrupting rating (ohmic load) max. | 88 W (220 V DC, τ = 0 ms) |
| Interrupting rating (ohmic load) max. | 1500 VA (250 V AC, τ = 0 ms) |
| Maximum interrupting rating (inductive load) | 42 W (24 V DC, τ = 40 ms) |
| Maximum interrupting rating (inductive load) | 40 W (48 V DC, τ = 40 ms) |
| Maximum interrupting rating (inductive load) | 36 W (60 V DC, τ = 40 ms) |
| Maximum interrupting rating (inductive load) | 35 W (110 V DC, τ = 40 ms) |
| Maximum interrupting rating (inductive load) | 33 W (220 V DC, τ = 40 ms) |
| Switching capacity min. | 50 mW |
| Switching capacity (360/h cycles) | 4 A (24 V DC) |
| Switching capacity (360/h cycles) | 4 A (230 V AC) |
| Switching capacity (3600/h cycles) | 2.5 A (24 V (DC13)) |
| Switching capacity (3600/h cycles) | 3 A (230 V (AC15)) |
| Output fuse | 10 A gL/gG (N/O contact) |
| Output fuse | 6 A gL/gG (N/C contact) |
Connection technology
| pluggable | yes |
Conductor connection
| Connection Method | Screw connection |
| Conductor cross section, rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section, flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Stripping length | 7 mm |
| Screw thread | M3 |
Dimensions
| Width | 22.5 mm |
| Height | 99 mm |
| Depth | 114.5 mm |
Material specifications
| Color | yellow |
| Housing Material | Polyamide |
Safety data
| Stop category | 0 |
Safety data: EN ISO 13849
| Category | 4 (In conjunction with suitable evaluating device) |
| Performance level (PL) | e (In conjunction with suitable evaluating device) |
Safety data: EN 50156
| Safety Integrity Level (SIL) | 3 |
Safety data: IEC 61508 - High demand
| Safety Integrity Level (SIL) | 3 (In conjunction with suitable evaluating device) |
Safety data: IEC 61508 - Low demand
| Safety Integrity Level (SIL) | 3 (In conjunction with suitable evaluating device) |
Safety data: EN IEC 62061
| Safety Integrity Level (SIL) | 3 (In conjunction with suitable evaluating device) |
Ambient conditions
| Degree of Protection | IP20 |
| Min. degree of protection of inst. location | IP54 |
| Ambient Temperature (Operation) | -20 °C ... 55 °C (observe derating) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Maximum altitude | ≤ 2000 m (Above sea level) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Shock | 15g |
| Vibration (Operation) | 10 Hz ... 150 Hz, 2g |
CE
| Certificate | CE-compliant |
Air clearances and creepage distances between the power circuits
| Standards/regulations | DIN EN 50178/VDE 0160 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | See derating curve |
| Mounting Position | vertical or horizontal |
Why Proax for Phoenix Contact 2902935?
Proax is an authorized distributor of Phoenix Contact 2902935 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
1- or 2-channel contact extension with wide range input, 4 N/O contacts, 1 N/C contact, 1 confirmation current path, together with basic device up to Cat. 4, PL e in accordance with EN ISO 13849, plug-in screw terminal block, width: 22.5 mm
PSR-SCP-120UC/URM/5X1/2X2 - Safe coupling relay with force-guided contacts, 5 N/O contacts, 2 N/C contacts, 1-channel, plug-in screw terminal block, width: 22.5 mm
PSR-SCP- 24DC/URM4/5X1/2X2 - 1-channel or 2-channel contact extension, 5 N/O contacts, 1 N/C contact, 1 confirmation current path, together with basic device up to Cat. 4 PL e in accordance with EN ISO 13849 safe isolation, width: 35 mm, pluggable screw terminal block
