Official DistributorSKU
MPN
IB IL SGI 2/F-2MBD-PAC
Weight
0.226 kg
This product is Not Cancellable/Not Returnable
Series IB-IL-SGI
IB IL SGI 2/F-2MBD-PAC - Analog module
Inline, Strain gauge measurement terminal, transmission speed in the local bus: 2 Mbps, 2 fast inputs, 4-, 6-conductor connection technology, degree of protection: IP20, including Inline connectors and marking fields
- 2 fast inputs for strain gauge
- Connection of strain gauges in 6- and 4-conductor technology
- Sensor supply voltage provided by the terminal, no external power supply required
- Communication either via process data or parameter channel (PCP)
- The channels are parameterized independently of one another via the bus system
- Bus-synchronous process data update
- Diagnostic and status indicators
Technical Specifications
Dimensions
| Width | 48.8 mm |
| Height | 136 mm |
| Depth | 71.5 mm |
Inline local bus
| Number of interfaces | 2 |
| Connection Method | Inline data jumper |
| Transmission Speed | 2 Mbps |
| Transmission physics | Copper |
Module
| ID code (dec.) | 223 |
| ID code (hex) | DF |
| Length code (hex) | 03 |
| Length code (dec) | 03 |
| Process data channel | 48 bit |
| Input address area | 6 Byte |
| Output address area | 6 Byte |
| Register length | 32 bit |
| Required parameter data | 15 Byte |
| Required configuration data | 5 Byte |
Analog
| Description of the input | Input channels for strain gauge |
| Number of Inputs | 2 |
| Connection technology | 6 or 4-wire, twisted pair shielded cable |
| Bridge difference Ud | Measuring range specified by selecting the characteristic and the bridge voltage |
| Bridge voltage U0 | 3.3 V |
| Bridge voltage U0 | 5 V |
| Measured value representation | 15 bit + sign bit |
| Characteristics | ±1 mV/V, ±2 mV/V, ±3 mV/V, ±4 mV/V |
| Characteristics | +1 mV/V, +2 mV/V, +3 mV/V, +4 mV/V |
| Output description | Voltage output |
| Number of Outputs | 2 |
| Impedance | > 58.3 Ω (typical; permissible total resistance of the strain gauge) |
| Output Voltage | 5 V |
| Output Voltage | 3.3 V |
| Output Current | typ. 55 mA (with UV = 3.3 V) |
| Output Current | typ. 85 mA (with UV = 5 V) |
Product properties
| Product family | Inline |
| Type | modular |
| Scope of delivery | including Inline connectors and marking fields |
| Operating mode | Process data operation with 3 words, PCP with 1 word |
| Special Properties | 2 fast inputs |
| Special Properties | 4-, 6-conductor connection technology |
| Diagnostics messages | Failure of the power supply at UANA Error message in the process data |
| Diagnostics messages | Failure of or insufficient communications power UL I/O error message sent to the bus coupler |
| Diagnostics messages | I/O error Error message in the process data |
Potentials
| Power consumption | typ. 0.94 W (Device in nominal operation) |
Potentials: Communications power (UL)
| Supply Voltage | 7.5 V DC (via voltage jumper) |
| Current draw | max. 110 mA |
| Current draw | typ. 100 mA |
Potentials: Supply of analog modules (UANA)
| Supply Voltage | 24 V DC (via voltage jumper) |
| Supply Voltage Range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current draw | typ. 32 mA (with maximum load of 58.3 Ω when UV = 5 V) |
| Current draw | typ. 8 mA (without strain gauge) |
Electrical isolation/isolation of the voltage ranges
| Test voltage: Logic/analog I/O (digital isolator) | 500 V AC, 50 Hz, 1 min. |
| Test voltage: Functional ground/analog I/O (isolating distance) | 500 V AC, 50 Hz, 1 min. |
| Test voltage: Logic/functional ground (isolating distance) | 500 V AC, 50 Hz, 1 min. |
Connection technology
| Connection name | Inline connector |
Conductor connection
| Connection Method | Spring-cage connection |
| Conductor cross section rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
| Stripping length | 8 mm |
Inline connector
| Connection Method | Spring-cage connection |
| Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
| Stripping length | 8 mm |
Ambient conditions
| Ambient Temperature (Operation) | -25 °C ... 55 °C |
| Degree of Protection | IP20 |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
Standards and Regulations
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Mounting
| Mounting Type | DIN rail mounting |
Accessories
3026489 - Support bracket, Bracket for busbars, set every 20 cm, width: 6.2 mm, height: 95.5 mm, number of positions: 1, color: gray, mounting type: DIN rail mounting
3026476 - Support bracket, Bracket for busbars, set every 20 cm, depth: 20 mm, width: 56 mm, height: 10 mm, diameter: 4.5 mm, number of positions: 2, color: silver, mounting type: Direct mounting
0402174 - Neutral busbar, DIN VDE 0611-4: 1991-02, material: Copper, tin-plated, color: silver
0404017 - Connection terminal block, connection method: Screw connection, Rated cross section: 4 mm2, cross section: 0.5 mm2 - 6 mm2, mounting: Neutral busbar, color: silver
0421029 - Connection terminal block, nom. voltage: 300 V, nominal current: 41 A, connection method: Screw connection, Rated cross section: 4 mm2, cross section: 0.5 mm2 - 6 mm2, mounting: Neutral busbar, color: green-yellow
0421032 - Connection terminal block, nom. voltage: 300 V, nominal current: 41 A, connection method: Screw connection, Rated cross section: 4 mm2, cross section: 0.5 mm2 - 6 mm2, mounting: Neutral busbar, color: black
Why Proax for Phoenix Contact 2878735?
Proax is an authorized distributor of Phoenix Contact 2878735 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2878638 - Inline, Strain gauge measurement terminal, transmission speed in the local bus: 500 kbps, 2 fast inputs, 4-, 6-conductor connection technology, degree of protection: IP20, including Inline connectors and marking fields
2702373 - Inline, Strain gauge measurement terminal, transmission speed in the local bus: 500 kbps, 2 precise and fast inputs, 4-, 6-conductor connection technology, degree of protection: IP20, including Inline connectors and marking fields- 2692351 - Inline analog strain gauge input terminal, two precise inputs, 4, 6-conductor connection method
2700064 - Inline analog strain gauge input terminal, without accessories, evaluating electronics with EC type approval
2727624 - Connector, colored identification, for digital 4, or 16-channel Inline output terminal blocks- 2740494 - Connector, colored identification, for digital 4, or 16-channel Inline output terminal blocks
2740274 - Connector, colored identification, for digital 1, 2 or 8-channel Inline output terminal blocks
2740261 - Plug, colored identification, for digital 1, -2 or 8-channel Inline input terminal blocks with AC voltage
