Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
PLC-RPT- 24UC/2X21/FG
Weight
0.078 kg
This product is Not Cancellable/Not Returnable
Series PLC-RPT

PLC-RPT- 24UC/2X21/FG - Relay Module

PLC-INTERFACE, consisting of a relay base and plug-in safety relay with force-guided contacts in accordance with DIN EN 61810-3, Push-in connection, 2 changeover contacts, forcibly actuated, Bridge rectifier, Input voltage: 24 V AC/DC

Technical Specifications

Product properties

Product familyPLC-INTERFACE
ApplicationForcibly guided contacts
Operating mode100% operating factor
Mechanical service lifeapprox. 107 cycles
B10d600000 Cycles (AC1; 250 V / 6 A; 1 NO)
B10d900000 Cycles (AC1; 250 V / 3 A; 1 NO)
B10d1800000 Cycles (AC1; 250 V / 1,5 A; 1 NO)
B10d180000 Cycles (AC15; 250 V / 3 A; 1 NO)
B10d560000 Cycles (AC15; 250 V / 2 A; 1 NO)
B10d4600000 Cycles (AC15; 250 V / 0,75 A; 1 NO)
B10d360000 Cycles (DC13; 24 V / 3 A; 1 NO)
B10d740000 Cycles (DC13; 24 V / 1,5 A; 1 NO)
B10d4200000 Cycles (DC13; 24 V / 0,75 A; 1 NO)

Insulation characteristics

InsulationSafe isolation, reinforced insulation

Insulation characteristics: Standards/regulations

InsulationSafe isolation, reinforced insulation
Overvoltage categoryIII
Pollution degree2

Electrical properties

Maximum power dissipation for nominal condition0.72 W
Test voltage (Winding/contact)4 kVrms (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact)2.5 kVrms (50 Hz, 1 min., changeover contact/changeover contact)

Standards/regulations

Rated Insulation Voltage250 V AC
Rated surge voltage6 kV

Coil side

Nominal input voltage UN24 V AC/DC
Input voltage range20.9 V DC ... 32.4 V DC (20 °C)
Input voltage range in reference to UNsee diagram
Drive and functionmonostable
Drive (polarity)polarized
Typical input current at UN30 mA
Typical response time3 ms ... 15 ms
Typical release time range3 ms ... 15 ms
Coil Voltage24 V DC
Protective circuitBridge rectifier
Operating voltage displayYellow LED

Switching

Contact switching type2 changeover contacts, forcibly actuated
Type of switch contactSingle contact
Contact MaterialAgNi
Maximum Switching Voltage250 V AC/DC
Minimum Switching Voltage5 V (10 mA)
Limiting Continuous Current6 A
Maximum Inrush Current6 A
Min. switching current10 mA (5 V)
Interrupting rating (ohmic load) max.144 W (24 V DC)
Interrupting rating (ohmic load) max.288 W (48 V DC)
Interrupting rating (ohmic load) max.88 W (110 V DC)
Interrupting rating (ohmic load) max.110 W (220 V DC)
Interrupting rating (ohmic load) max.1500 VA (250 V AC)
Switching capacity min.150 mW
Switching capacity3 A (24 V, DC13)
Switching capacity3 A (230 V, AC15)
Force-guided contacts in accordance with EN 61810-3Type B

Connection data

Connection MethodPush-in connection
Stripping length10 mm
Conductor cross section rigid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm² (Single ferrule)
Conductor cross section flexible2x 0.5 mm² ... 1 mm² (TWIN ferrule)
Conductor cross section AWG26 ... 14

Dimensions

Width14 mm
Height80 mm
Depth104 mm

Material specifications

Colorgray (RAL 7042)

Ambient conditions

Degree of protection (Relay)RT II (Relay)
Degree of protection (Relay base)IP20 (Relay base)
Degree of protection (Installation location)≥ IP54 (Installation location)
Ambient Temperature (Operation)-20 °C ... 60 °C
Ambient temperature (storage/transport)-20 °C ... 85 °C
Altitude≤ 2000 m

CE

CertificateCE-compliant

UKCA

CertificateUKCA-compliant

UL, USA

IdentificationUL 508
IdentificationUL 508 Recognized

UL, USA/Canada

IdentificationUL 508
IdentificationUL 508 Recognized

Shipbuilding approval

CertificateTAE0000196

Corrosive gas test

IdentificationISA-S71.04. G3 Harsh Group
IdentificationEN 60068-2-60

DNV GL data

TemperatureD
HumidityA
VibrationB/C
EMCB
EnclosureRequired protection according to the Rules shall be provided upon installation on board

EMC data

Low Voltage DirectiveConformance with Low Voltage Directive
Electromagnetic compatibilityConformance with EMC directive

Standards/regulations

Standards/regulationsIEC 60947-5-1
Standards/regulationsDIN EN 61810-3

Mounting

Mounting TypeDIN rail mounting
Assembly instructionsin rows with zero spacing
Mounting Positionany
Accessories

Why Proax for Phoenix Contact 2910539?

Proax is an authorized distributor of Phoenix Contact 2910539 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size10
Recommended
Sold in quantities of 10

Available for order

Phoenix Contact Availability