Official DistributorSKU
MPN
PI-EX-NAM/RNC-NE
Weight
0.097 kg
This product is Not Cancellable/Not Returnable
PI-EX-NAM/RNC-NE - Signal isolator
Ex i binary input: NAMUR isolation amplifiers. For operating proximity sensors and switches in Ex areas. The binary signals are transmitted to a safe area. Relay output (N/C contact), line fault detection. Galvanic 3-way isolation.
Technical Specifications
Notes
| Order information: | The electronics module is plugged into a basic terminal block. |
Product properties
| Application | Digital IN |
| No. of channels | 1 |
Electrical properties
| Electrical isolation | 3-way isolation |
| Test voltage input/output | 1.5 kV AC |
Supply
| Supply Voltage Range | 20 V DC ... 30 V DC |
| Max. current consumption | max. 40 mA |
| Power dissipation | max. 0.8 W (24 V) |
Control
| Input name | Control current circuit |
| Description of the input | Intrinsically safe |
| Available Input Sources | NAMUR proximity sensors |
| Available Input Sources | Floating switch contacts |
| Available Input Sources | Switch contacts with resistance circuit |
| Non-load voltage | 8.2 V DC ±10 % |
| Switching threshold "0" signal current | < 1.2 mA (attenuated in acc. with EN 60947-5-6) |
| Switching threshold "1" signal, current | > 2.1 mA (non-attenuated in acc. with EN 60947-5-6) |
Switching: Relay
| Configurable/programmable | Switching behavior can be inverted via DIP switch |
| Contact switching type | N/C contact |
| Contact Material | AgSnO, hard gold-plated |
| Limiting Continuous Current | 1 A (30 V DC) |
| Limiting Continuous Current | 0.5 A (125 V AC) |
| Min. switching current | 1 mA |
Safety data
| Max. output voltage Uo | 10.6 V |
| Max. output current Io | 33 mA |
| Max. output power Po | 86 mW |
| EEX specification | [EEx ia] IIC, EX II (1)GD, KEMA 00 ATEX 1126 |
| IIA: Max. external inductivity Lo / Max. external capacitance Co | 230 mH / 72.9 µF |
| IIB: Max. external inductivity Lo / Max. external capacitance Co | 110 mH / 16.2 µF |
| IIC: Max. external inductivity Lo / Max. external capacitance Co | 30 mH / 2.3 µF |
Signaling
| Status display | Green LED (supply voltage) |
| Status display | Yellow LED (status display) |
| Status display | Red LED (line errors) |
Dimensions
| Width | 12.4 mm |
| Height | 79 mm |
| Depth | 118.4 mm |
Material specifications
| Color | green (RAL 6021) |
| Flammability rating according to UL 94 | V0 |
| Housing Material | Polyamide PA non-reinforced |
Ambient conditions
| Ambient Temperature (Operation) | -20 °C ... 60 °C (vertical assembly) |
| Ambient Temperature (Operation) | -20 °C ... 55 °C (horizontal assembly) |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Permissible humidity (operation) | 5 % ... 95 % (relative humidity, non-condensing) |
ATEX
| Identification | II (1) G [Ex ia Ga] IIC |
| Identification | II (1) D [Ex ia Da] IIIC |
| Identification | II 3 G Ex nA nC IIC T4 Gc |
| Certificate | PxCIF07ATEX2835341X |
EAC Ex
| Identification | [Ex ia Ga] IIC |
| Certificate | RU C-DE.AB72.B.00097/19 |
EMC data
| Noise immunity | EN 61326:1997 |
| Electromagnetic compatibility | Conformance with EMC directive |
| Noise emission | EN 61326:1997 |
Standards and Regulations
| Electrical isolation | 3-way isolation |
Why Proax for Phoenix Contact 2835367?
Proax is an authorized distributor of Phoenix Contact 2835367 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
PI-EX-MB/16/D-SUB - Ex motherboard, intrinsically safe, for accommodating 16 PI/Ex-... process interface modules, for assembly on NS 35/7.5 or NS 32
PI-EX-MB/16/3/D-SUB - Ex i motherboard to accept 16 x PI-Ex i isolator modules (PI-Ex-...), three terminal points for the field side for every module, 37-pos. D-SUB pin strip for connection of the signals to the control system level, assembly on NS 32, or NS 35/7.5.
PI-EX-MB/ 8/3/D-9SUB - Ex universal module carrier (motherboard) to hold 3-conductor measuring transducers, intrinsically safe, for max. 8 PI-... modules, for mounting on NS 35/7.5 or NS 32
PI-EX-MB-AI/ 8/FLK14/PLC/KD-S1 - Ex i motherboard to accept 8 x PI-Ex i repeater power supplies, input signal conditioners etc. (PI-EX-...), FLK pin strips for connection to S7-300 analog in cards using system cables, disconnect plug terminal blocks for the field side, assembly on NS 32, or NS 35/7.5.- PI-EX-MB-DI/16/FLK14/PLC/KD-S1 - Ex i motherboard to accept 16 x PI-Ex i NAMUR repeater power supplies (PI-EX-NAM...), FLK pin strips for connection to S7-300 digital in cards using system cables, disconnect plug terminal blocks for the field side, assembly on NS 32, or NS 35/7.5.
PI-EX-MB-S/16-01-2/D-SUB - Ex i motherboard for accommodating 16 x PI-Ex supply, input or output signal conditioner modules. With interface for connecting to HART multiplexer and D-SUB pin strip for connecting the analog signals to the control system level.
PI-EX-ME-RJ - Adapter cable, for programming PI-Ex-ME... modules (D-SUB 25-pos. to western plug, 1.6 m long). Configuration software can be downloaded free of cost from the Download area.
