Official Distributor
SKU
MPN
RIF-1-RSC-LDP-24DC/2X21/FG
Weight
0.075 kg
This product is Not Cancellable/Not Returnable
Series RIF
RIF-1-RSC-LDP-24DC/2X21/FG - Relay Module
Preassembled relay module with screw connection, consisting of: relay base, safety relay with force-guided contacts in accordance with DIN EN 61810-3, plug-in display/interference suppression module, and retaining bracket, contact switching type: 2 changeover contacts, input voltage: 24 V DC
Technical Specifications
Product properties
Product family | RIFLINE complete |
Application | Forcibly guided contacts |
Operating mode | 100% operating factor |
Mechanical service life | approx. 107 cycles |
B10d | 600000 Cycles (AC1; 250 V / 6 A; 1 NO) |
B10d | 900000 Cycles (AC1; 250 V / 3 A; 1 NO) |
B10d | 1800000 Cycles (AC1; 250 V / 1,5 A; 1 NO) |
B10d | 300000 Cycles (DC13; 24 V / 3 A; 1 NO) |
B10d | 1000000 Cycles (DC13; 24 V / 1,5 A; 1 NO) |
B10d | 3000000 Cycles (DC13; 24 V / 0,75 A; 1 NO) |
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation | Safe isolation between input and output |
Insulation | Basic insulation between the changeover contacts |
Overvoltage category | III |
Pollution degree | 2 |
Electrical properties
Maximum power dissipation for nominal condition | 0.72 W |
Test voltage (Winding/contact) | 4 kVrms (50 Hz, 60 s) |
Test voltage () | 1.5 kVrms (50 Hz, 60 s) |
Test voltage (Changeover contact/changeover contact) | 2.5 kVrms (50 Hz, 60 s) |
Air clearances and creepage distances between the power circuits
Rated Insulation Voltage | 250 V AC (Input/output) |
Rated surge voltage | 6 kV (Input/output) |
Rated surge voltage | 4 kV (between the changeover contacts) |
Short-circuit protection device
Current | 10 A (RT28-32) |
Voltage | 500 V (SCPD) |
Short-circuit current | 1 kA (conditional short-circuit current) |
Coil side
Nominal operating voltage UN | 24 V DC |
Input voltage range | 20.4 V DC ... 28.8 V DC (20 °C) |
Input voltage range in reference to UN | see diagram |
Drive and function | monostable |
Drive (polarity) | polarized |
Typical input current at UN | 30 mA |
Typical response time | 15 ms |
Typical release time | 10 ms |
Coil Voltage | 24 V DC |
Protective circuit | Freewheeling diode |
Operating voltage display | Yellow LED |
Switching
Contact switching type | 2 changeover contacts, forcibly actuated |
Type of switch contact | Single contact |
Contact Material | AgSnO |
Maximum Switching Voltage | 250 V AC/DC |
Limiting Continuous Current | 6 A |
Interrupting rating (ohmic load) max. | 144 W (24 V DC) |
Interrupting rating (ohmic load) max. | 58 W (48 V DC) |
Interrupting rating (ohmic load) max. | 54 W (60 V DC) |
Interrupting rating (ohmic load) max. | 55 W (110 V DC) |
Interrupting rating (ohmic load) max. | 55 W (220 V DC) |
Interrupting rating (ohmic load) max. | 1500 VA (250 V AC) |
Utilization category CB Scheme (IEC 60947-5-1) | AC15, 3 A/240 V (N/O contact) |
Connection data
Connection Method | Screw connection |
Stripping length | 8 mm |
Conductor cross section rigid | 0.5 mm² ... 4 mm² |
Conductor cross-section rigid (2 conductors with same cross section) | 0.5 mm² ... 2.5 mm² |
Conductor cross section flexible | 0.5 mm² ... 4 mm² |
Conductor cross section flexible | 0.5 mm² ... 4 mm² (Ferrule with plastic sleeve) |
Conductor cross section flexible (2 conductors with same cross section) | 0.5 mm² ... 2.5 mm² |
Conductor cross section flexible (2 conductors with same cross section) | 0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve) |
Conductor cross section AWG | 20 ... 10 (solid) |
Conductor cross section AWG | 20 ... 12 (flexible) |
Tightening torque | 0.5 Nm ... 0.6 Nm |
Dimensions
Width | 16 mm |
Height | 90 mm |
Depth | 75 mm |
Material specifications
Color | gray (RAL 7042) |
Flammability rating according to UL 94 | V2 (Housing) |
Ambient conditions
Degree of protection (Relay base) | IP20 (Relay base) |
Degree of protection (Relay) | RT I (Relay) |
Ambient Temperature (Operation) | -25 °C ... 60 °C |
Ambient temperature (storage/transport) | -25 °C ... 85 °C |
Altitude | ≤ 2000 m |
CE
Certificate | CE-compliant |
UKCA
Certificate | UKCA-compliant |
Corrosive gas test
Identification | ISA-S71.04. G3 Harsh Group |
Identification | EN 60068-2-60 |
All specifications in accordance with the standard
Standards/regulations | IEC 60947-5-1 |
Standards/regulations | IEC 61810-3 |
Air clearances and creepage distances between the power circuits
Standards/regulations | DIN EN 60947-5-1 |
Mounting
Mounting Type | DIN rail mounting |
Assembly instructions | in rows with zero spacing |
Mounting Position | any |
Accessories
Why Proax for Phoenix Contact 2909848?
Proax is an authorized distributor of Phoenix Contact 2909848 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended