System cabling for controllers
CABLE-FLK16/OE/0,14/ 4,0M - Round cable set; connection 1: Single wires (16-position) (The wires are marked and fitted with ferrules); connection 2: IDC/FLK socket strip (1x 16-position); cable length: 4 m
Not in stock
CABLE-50/4FLK14/ 6,0M/YUC - Cast Yokogawa front adapter with attached round cable and an injection-molded 50-pos. socket strip for the connection of 4 x 8 channels on the field side. Cable length: 6.0 m
Not in stock
UM-2KS40/16AI/SI/RS/Z/SO225 - 16-channel analog input module with spring-cage connection and redundant voltage supply. Suitable for Yokogawa SAI 143 card.
Not in stock
UM-2KS50/DO 8/RS/KDS-3/SO227 - 8-channel digital output module with screw connection and integrated knife disconnect function. Redundant voltage supply with signaling relay. Suitable for Yokogawa SDV 531 card.
Not in stock
UM-2KS50/UNI/CS - Universal module for connecting to up to 32 channel digital Yokogawa cards, 1:1 connection of the Yokogawa system connector on screw terminal block connection.
Not in stock
UM-2KS50/16DI/RS/SO225 - 16-channel digital input module with screw connection and redundant voltage supply. Suitable for Yokogawa SDV 144 card.
Not in stock
UM-2KS40/16AI/SI/RS/SO225 - 16-channel analog input module with screw connection and redundant voltage supply. Suitable for Yokogawa SAI 143 card.
Not in stock
CABLE-40/2FLK16/10,0M/YUC - Cast Yokogawa front adapter with attached round cable and an injection-molded 40-pos. socket strip for the connection of 2 x 8 channels on the field side. Cable length: 10.0 m
Not in stock
FLKM-2KS40/PMT/SI/Z/YCS - VARIOFACE interface module for Yokogawa I/O AAI135 and AAI835 modules.
Not in stock
CABLE-50/4FLK14/15,0M/YUC - Cast Yokogawa front adapter with attached round cable and an injection-molded 50-pos. socket strip for the connection of 4 x 8 channels on the field side. Cable length: 15.0 m
Not in stock
UM- D37SUB/M/HC3/16DO/MR/MT - 16-channel relay module (1 changeover contact) for Honeywell C300 output modules. On the control side, the module is controlled via D-SUB 37-pos. or FLK 50-pos. A screw connection with knife disconnection is available on the field side.
Not in stock



















