Industrial communication & Networking

RAD-NAM4-IFS - Radioline - I/O extension module, 4 NAMUR digital input module used in Radioline and PROFIBUS PA MUX I/O systems. Fulfills the NAMUR proximity sensor standard EN 60947-5-6, and communication to the head stations for Radioline systems and the FB-MUX/HS...PA via the T-BUS connector installed on the DIN rail. This module has channel-to-channel isolation.

GW PL PA/HART - HART to PROFIBUS PA protocol converter

GW PL DP/HART - HART to PROFIBUS DP protocol converter

GW PL PA/MODBUS - Modbus/RTU to PROFIBUS PA protocol converter

License - FL MGUARD LIC FW RD

Termination resistor - FL LCX 50-OHM-RSMA

GW DEVICE SERVER 2E/2DB9 - Serial device server for converting serial data (RS-232/422/485) to Ethernet data (RJ45). Supports TCP and UDP protocols. COM port redirector software and Windows drivers are available for download. Includes two RJ45 ports and two D-SUB 9 ports.

GW MODBUS TCP/RTU 2E/4DB9 - The GW MODBUS TCP/RTU... gateway converts serial based Modbus RTU (or ASCII) to Modbus TCP. Supports serial client or server devices. Includes two RJ45 ports and four D-SUB 9 ports.

GW MODBUS TCP/ASCII 1E/1DB9 - The GW MODBUS TCP/ASCII... converts RAW or ASCII serial strings into Modbus registers. Includes one RJ45 port and one D-SUB 9 port.

GW MODBUS TCP/ASCII 1E/2DB9 - The GW MODBUS TCP/ASCII... converts RAW or ASCII serial strings into Modbus registers. Includes one RJ45 port and two D-SUB 9 ports.

Industrial Ethernet Switch - FL SWITCH 2214-2FX SM

Industrial Ethernet Switch - FL SWITCH 2212-2TC-2SFX

Industrial Ethernet Switch - FL SWITCH 2206-2SFX

SUBCON-PLUS-PROFIB/90/PG/M12 - D-SUB plug, 9-pos., pin, with PG-D-SUB socket, assignment: 3, 5, 6, 8; two M12 cable glands (B-coded) 90° cable entry. Bus system: PROFIBUS DP up to 12 Mbps. Termination resistor via separate M12 terminator.

SUBCON-PLUS-PROFIB/AX/M12 - D-SUB plug, 9-pos., pin, assignment: 3, 5, 6, 8; two M12 cable glands (B-coded) under 180° (axial). Bus system: PROFIBUS DP up to 12 Mbps. Termination resistor via separate M12 terminator.

D-SUB connector, 9-pos., socket, assignment: 2, 3, 5, 7, 9; two M12 cable entries (A-coded) under 90°. Bus system: CAN, CANopen®. Termination resistor via separate M12 terminator.

SUBCON-PLUS-CAN/90X/M12 - D-SUB connector, 9-pos., socket, assignment: 2, 3, 5, 7, 9; two M12 cable entries (A-coded) under 90°. Bus system: CAN, CANopen®. Termination resistor via separate M12 terminator.

FL-PP-RJ45-SCC/SC041 - Cable sharing module, two RJ45 jacks with Ethernet assignment (cable outlet on the front) to 8 spring-cage connection terminal blocks, CAT5e, 10/100 Mbps, DIN rail mounting, IP20, option of shield contacting on DIN rail via jumpers

Industrial Ethernet Switch - FL SWITCH 1004N-FX SM

FL DIN-RAIL ADAPTER 40 - The FL DIN-RAIL ADAPTER 40 is designed to allow products 40 mm wide to be mounted flush to a standard 35 mm DIN rail, in any orientation.