Official DistributorSKU
MPN
PSR-MC82-5NO-1NC-1DO-24DC-SC
Weight
0.221 kg
Series PSR-MC
PSR-MC82-5NO-1NC-1DO-24DC-SC - Extension module
Contact extension up to SIL 3, Cat. 4, PL e in conjunction with suitable evaluation device, 5 enabling current paths, US = 24 V DC, plug-in screw terminal block
- Up to Cat. 4/PL e in accordance with ISO 13849-1, SIL 3 in accordance with EN IEC 62061 in conjunction with suitable evaluation device
- Low housing width of just 17.5 mm
- 1- and 2-channel control
- 5 enabling current paths, 1 confirmation current path, 1 digital signal output
- Automatic activation
Technical Specifications
Product properties
| Product family | PSRmini |
| Application | Extension module |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
Times
| Typical response time | < 50 ms (Monitored/manual and auto-start) |
| Typ. starting time with Us | < 50 ms (when controlled via A1/A2) |
| Typical release time | < 25 ms (when controlled via A1/A2) |
| Recovery time | < 100 ms |
Electrical properties
| Maximum power dissipation for nominal condition | 15.2 W (at US = 30 V, IL² = 64 A²) |
| Nominal operating mode | 100% operating factor |
Air clearances and creepage distances between the power circuits
| Rated Insulation Voltage | 250 V AC |
| Rated Insulation Voltage | 250 V AC |
Supply
| Designation | A1/A2 |
| Rated control circuit supply voltage US | 19.2 V DC ... 30 V DC |
| Rated control circuit supply voltage US | 24 V DC -20 % / +25 % |
| Rated control supply current IS | typ. 80 mA |
| Power consumption at US | typ. 1.92 W |
| Inrush Current | typ. 125 mA (Δt = 7 ms at Us) |
| Filter time | 4 ms (at A1 in the event of voltage dips at Us) |
| Filter time | max. 1 ms (at A1/A2, test pulse width, blanking pulses/dark test) |
| Filter time | 5 ms (at A1/A2, test pulse rate, blanking pulses/dark test) |
| Filter time | Where test pulse width < 1 ms: test pulse rate = 5 x test pulse width |
| Filter time | max. 1 ms (at A1/A2, test pulse width, switch-on pulses/light test) |
| Filter time | 10 ms (at A1/A2; test pulse rate; switch-on pulses/light test) |
| Filter time | Deactivate the switch-on pulses for safety applications. |
| Protective circuit | Surge protection; Suppressor diode |
| Protective circuit | Reverse polarity protection; Universal diode |
Relay: Enabling current paths (23/24 ... 63/64)
| Output description | safety-related N/O contacts |
| Number of Outputs | 5 (undelayed) |
| Contact switching type | 5 enabling current paths |
| Contact Material | AgSnO2 |
| Switching voltage | min. 5 V AC/DC |
| Switching voltage | max. 24 V DC (Enabling current path 23/24) |
| Switching voltage | max. 250 V AC/DC (all other enabling current paths, observe load curve) |
| Switching capacity | min. 50 mW (5 V / 10 mA) |
| Inrush Current | min. 10 mA |
| Inrush Current | max. 20 A (≤ 100 ms) |
| Switching capacity in accordance with IEC 60947-5-1 | 3 A (24 V (DC13)) |
| Switching capacity in accordance with IEC 60947-5-1 | 3 A (250 V (AC15)) |
| Limiting Continuous Current | 6 A (observe derating) |
| Sq. Total current | 64 A2 (observe derating) |
| Switching frequency | max. 0.5 Hz |
| Mechanical service life | 10x 106 cycles |
| Output fuse | 10 A gL/gG |
| Output fuse | 6 A gL/gG (for low-demand applications) |
Relay: Confirmation current path (11/12)
| Output description | Safety-related N/C contacts |
| Number of Outputs | 1 (undelayed) |
| Contact switching type | 1 confirmation current path |
| Contact Material | AgSnO |
| Switching voltage | min. 5 V AC/DC |
| Switching voltage | max. 24 V DC |
| Switching capacity | min. 50 mW |
| Inrush Current | min. 10 mA |
| Inrush Current | max. 100 mA |
| Limiting Continuous Current | 100 mA |
| Switching frequency | max. 0.5 Hz |
| Mechanical service life | 10x 106 cycles |
Signal: M1
| Output description | non-safety-related |
| Number of Outputs | 1 (digital, PNP) |
| Voltage | typ. 23 V DC (US - 1 V) |
| Current | max. 100 mA |
| Maximum Inrush Current | 500 mA (Δt = 1 ms at Us) |
| Short-circuit protection | Yes |
Connection technology
| pluggable | yes |
Conductor connection
| Connection Method | Screw connection |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross-section AWG | 24 ... 12 |
| Stripping length | 7 mm |
| Screw thread | M3 |
Signaling
| Status display | 2 x green LEDs |
Dimensions
| Width | 17.5 mm |
| Height | 112.2 mm |
| Depth | 114.5 mm |
Material specifications
| Color (Housing) | yellow (RAL 1018) |
| Housing Material | Polyamide |
Safety data
| Stop category | 0 |
Safety data: EN ISO 13849
| Category | 4 (In conjunction with suitable evaluating device) |
| Performance level (PL) | e (In conjunction with suitable evaluating device) |
Safety data: IEC 61508 - High demand
| Safety Integrity Level (SIL) | 3 (In conjunction with suitable evaluating device) |
Safety data: IEC 61508 - Low demand
| Safety Integrity Level (SIL) | 3 (In conjunction with suitable evaluating device) |
Safety data: EN IEC 62061
| Safety Integrity Level (SIL) | 3 (In conjunction with suitable evaluating device) |
Ambient conditions
| Degree of Protection | IP20 |
| Min. degree of protection of inst. location | IP54 |
| Ambient Temperature (Operation) | -20 °C ... 60 °C (observe derating) |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Maximum altitude | max. 2000 m (Above sea level) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Shock | 15g (In the event of stress caused by shock, contact reactions are possible for up to 6 ms.) |
| Vibration (Operation) | 10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.) |
CE
| Identification | CE-compliant |
Air clearances and creepage distances between the power circuits
| Standards/regulations | EN 60947-1 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | See derating curve |
| Mounting Position | vertical or horizontal |
Why Proax for Phoenix Contact 2702382?
Proax is an authorized distributor of Phoenix Contact 2702382 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
Extension de contacts jusqu'à la limite de sollicitation SIL 3, cat. 4, PL e en association avec l'analyseur approprié, 5 circuits de validation, US = 24 V DC, bloc de jonction Push-in enfichable
