Official DistributorSKU
MPN
FL SWITCH SMCS 14TX/2FX-SM
Weight
1.33 kg
This product is Not Cancellable/Not Returnable
Series FL-SWITCH-SMCS
FL SWITCH SMCS 14TX/2FX-SM - Industrial Ethernet Switch
Ethernet Smart Managed Compact Switch with 14 10/100 Mbps RJ45 ports and two 100 Mbps FX-SC single mode ports
- RSTP
- SNMP
- VLANs
- MRP (client and manager)
- Web-based management, SNMP
- Extended temperature rating
Technical Specifications
Dimensions
| Width | 214 mm |
| Height | 110 mm |
| Depth | 69 mm |
Material specifications
| Color | gray aluminum |
Mounting
| Mounting Type | DIN rail mounting |
Ethernet (RJ45)
| Connection Method | RJ45 |
| Note on the connection method | Auto negotiation and autocrossing |
| Transmission Speed | 10/100 Mbps |
| Transmission physics | Copper |
| Transmission length | 100 m (per segment) |
| Signal LEDs | Supply voltage, data transmission, error, link, activity |
| No. of channels | 14 (RJ45 ports) |
Ethernet FO
| Connection Method | SC |
| Transmission Speed | 100 Mbps (full duplex) |
| Transmission physics | Single-mode fiberglass |
| Transmission length | 36000 m (fiberglass with F-G 9/125 0.36 dB/km) |
| Transmission length | 32000 m (fiberglass with F-G 9/125 0.4 dB/km) |
| Transmission length | 26000 m (fiberglass with F-G 9/125 0.5 dB/km) |
| Wavelength | 1310 nm |
| No. of channels | 2 (SC single mode) |
Serial (RS-232)
| Connection Method | RS-232-C, 6-pos. MINI-DIN socket (PS/2) |
Product properties
| Product family | Managed Switch SMCS |
| Type | Block design |
| MTTF | 286.27 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| MTTF | 149.5 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) |
| MTTF | 21.69 Years (SN 29500 standard, temperature 70°C, operating cycle 100%) |
Insulation characteristics
| Protection class | III (VDE 0106) |
Switch functions
| Diagnostic functions | RMON History |
| Diagnostic functions | N:1-Portmirroring |
| Diagnostic functions | LLDP (Link Layer Discovery Protocol) |
| Diagnostic functions | SNMP-Traps |
| Diagnostic functions | ACD (Address Conflict Detection) |
| Basic Functions | Store-and-forward switch complies with IEEE 802.3 4 priority classes in acc. with IEEE 802.1 P TCP/IP protocol, BootP-capable, port-mirroring, integrated web server function, multicast filtering, IGMP snooping, VLAN, Rapid Spanning Tree (RSTP), PROFINET Device, Media Redundancy Protocol (MRP). |
| Signal contact control voltage | 24 V (typical) |
| Signal contact control current | 260 mA (maximum) |
| PROFINET conformance class | Conformance-Class B |
| PROFINET device function | PROFINET device |
| PROFINET device function | Fast Startup |
| Filter functions | Quality of Service (4 priority classes) |
| Filter functions | Port-Priorisierung |
| Filter functions | VLAN |
| Filter functions | IGMP Snooping (128 groups) |
| Filter functions | IGMP Query |
| Filter functions | Auto-Query-Port |
| Filter functions | Extended Multicast Filtering |
| Filter functions | Static Multicast Filtering |
| MAC address table | 16000 |
| Management | Web-based management (HTTP) |
| Management | SNMP v1/v2 |
| Management | Serial interface (V.24) |
| Redundancy | MRP (Media Redundancy Protocol) |
| Redundancy | RSTP (Rapid Spanning Tree Protocol) |
| Redundancy | FRD (Fast Ring Detection) |
| Redundancy | Large Tree Support |
| Status and diagnostic indicators | LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link and switchable Activity/Speed/Duplex) |
| Supported browsers | Internet Explorer 5.5 or higher |
| Additional functions | BootP |
| Additional functions | DHCP-Client |
| Time synchronization | SNTP |
Security functions
| Basic Functions | Store-and-forward switch complies with IEEE 802.3 4 priority classes in acc. with IEEE 802.1 P TCP/IP protocol, BootP-capable, port-mirroring, integrated web server function, multicast filtering, IGMP snooping, VLAN, Rapid Spanning Tree (RSTP), PROFINET Device, Media Redundancy Protocol (MRP). |
| Link Layer Discovery Protocol (LLDP) | As per protocol 802.2 |
Electrical properties
| Maximum power dissipation for nominal condition | 6.24 W |
| Test voltage | 500 V DC |
| Test section | for one minute 500 V DC |
| Transmission medium | Copper |
| Transmission medium | FO |
Supply
| Supply voltage (DC) | 24 V DC (redundant) |
| Supply Voltage Range | 18 V DC ... 32 V DC |
| Power supply connection | Via COMBICON, max. conductor cross section 2.5 mm² |
| Residual ripple | 3.6 VPP (within the permitted voltage range) |
| Typical current consumption | 290 mA (at US = 24 V DC) |
| Current consumption | 260 mA |
Function
| Signal contact control voltage | 24 V (typical) |
| Signal contact control current | 260 mA (maximum) |
Connection data
| Connection Method | Screw connection |
| Conductor cross section, rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section, flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Stripping length | 7 mm |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 70 °C (non-condensing) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Vibration (Operation) | in acc. with IEC 60068-2-6: 5g, 150 Hz |
| Air pressure (operation) | 86 kPa ... 108 kPa (2000 m above mean sea level) |
| Air pressure (storage/transport) | 66 kPa ... 108 kPa (3500 m above sea level) |
Standards and Regulations
| Free from substances that could impair the application of coating | Yes |
EMC data
| Conformance with EMC directives | IEC 61000-6-2 IEC 61000-4-2 (ESD) Criterion B |
| Conformance with EMC directives | IEC 61000-4-3 (electromagnetic fields) Criterion A |
| Conformance with EMC directives | IEC 61000-4-4 (burst) Criterion B |
| Conformance with EMC directives | IEC 61000-4-5 (surge) Criterion B |
| Conformance with EMC directives | IEC 61000-4-6 (immunity to conducted interference) Criterion A |
| Noise immunity | EN 61000-6-2:2005 |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Noise emission | EN 61000-6-3 |
Functionality
| Basic Functions | Store-and-forward switch complies with IEEE 802.3 4 priority classes in acc. with IEEE 802.1 P TCP/IP protocol, BootP-capable, port-mirroring, integrated web server function, multicast filtering, IGMP snooping, VLAN, Rapid Spanning Tree (RSTP), PROFINET Device, Media Redundancy Protocol (MRP). |
System requirements
| Supported browsers | Internet Explorer 5.5 or higher |
Signaling
| Status display | LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link and switchable Activity/Speed/Duplex) |
Accessories
FL MEM PLUG - Exchangeable configuration memory of the device settings for simple device exchange and set-up
FL MEM PLUG/MRM - Exchangeable configuration memory of the device settings for simple device exchange and set-up In addition, the Media Redundancy Manager (MRM) license for use is stored within the Media Redundancy protocol (MRP).
FL SNMP OPC SERVER V3 - SNMP-OPC server, German and English, for monitoring and configuration of SNMP-capable equipment in HMI and SCADA systems
FL CAT6 PATCH 0,3 - Patch cable, degree of protection: IP20, cable length: 0.3 m, number of positions: 8, 1 Gbps, CAT6, Ethernet- FL CAT6 PATCH 1,0 - Patch cable, degree of protection: IP20, cable length: 1 m, number of positions: 8, 1 Gbps, CAT6, Ethernet
- FL CAT6 PATCH 2,0 - Patch cable, degree of protection: IP20, cable length: 2 m, number of positions: 8, 1 Gbps, CAT6, Ethernet
- FL CAT6 PATCH 5,0 - Patch cable, degree of protection: IP20, cable length: 5 m, number of positions: 8, 1 Gbps, CAT6, Ethernet
- FL CAT6 PATCH 10 - Patch cable, degree of protection: IP20, cable length: 10 m, number of positions: 8, 1 Gbps, CAT6, Ethernet
- FL CAT6 PATCH 15,0 - Patch cable, degree of protection: IP20, cable length: 15 m, number of positions: 8, 1 Gbps, CAT6, Ethernet
FL SM PATCH 1,0 SC-SC, Assembled fiber optic cable, break-out cable, fiberglass single mode 9/125 µm (OS2, Low Water Peak Fiber) connector: SC duplex/SC duplex, degree of protection: IP20, for installation in cable ducts or control cabinets, length: 1 m
FL SM PATCH 1,0 SC-ST, Assembled fiber optic cable, break-out cable, fiberglass single mode 9/125 µm (OS2, Low Water Peak Fiber) connector: SC duplex/B-FOC(STⓇ), degree of protection: IP20, for installation in cable ducts or control cabinets, length: 1 m- FL SM PATCH 2,0 SC-ST, Assembled fiber optic cable, break-out cable, fiberglass single mode 9/125 µm (OS2, Low Water Peak Fiber) connector: SC duplex/B-FOC(STⓇ), degree of protection: IP20, for installation in cable ducts or control cabinets, length: 2 m
Why Proax for Phoenix Contact 2701466?
Proax is an authorized distributor of Phoenix Contact 2701466 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
FL SWITCH SMCS 16TX, The Smart Managed Compact Switch (SMCS) is an Ethernet switch suitable for industrial applications with 16 Fast Ethernet ports in RJ45 format.
FL SWITCH SMCS 6GT/2SFP, The Smart Managed Compact Switch (SMCS) is an Ethernet switch suitable for industrial applications with six Gigabit Ethernet ports in RJ45 format and 2 Gigabit Ethernet ports in SFP format.
FL SWITCH SMCS 4TX-PN, The Smart Managed Compact Switch (SMCS) is an Ethernet switch suitable for industrial applications with four Fast Ethernet ports in RJ45 format. The switch has “PROFINET” mode activated by default.
FL SWITCH SMCS 8GT, The Smart Managed Compact Switch (SMCS) is an Ethernet switch suitable for industrial applications with eight Gigabit Ethernet ports in RJ45 format.- FL SWITCH SMCS 6TX/2SFP, The Smart Managed Compact Switch (SMCS) is an Ethernet switch suitable for industrial applications with six Fast Ethernet ports in RJ45 format and 2 Gigabit Ethernet ports in SFP format.
- FL SWITCH SMCS 8TX, The Smart Managed Compact Switch (SMCS) is an Ethernet switch suitable for industrial applications with eight Fast Ethernet ports in RJ45 format.
- FL SWITCH SMCS 8TX-PN, The Smart Managed Compact Switch (SMCS) is an Ethernet switch suitable for industrial applications with eight Fast Ethernet ports in RJ45 format. The switch has “PROFINET” mode activated by default.
FL SWITCH SMN 6TX/2FX, The Smart Managed Narrow switch (SMN) is an Ethernet switch suitable for industrial applications with six Fast Ethernet ports in RJ45 format and two multimode Fast Ethernet FO ports in SC format
FL SWITCH SMN 6TX/2FX SM, The Smart Managed Narrow switch (SMN) is an Ethernet switch suitable for industrial applications with six Fast Ethernet ports in RJ45 format and two single-mode Fast Ethernet FO ports in SC format
FL SWITCH SMN 6TX/2POF-PN, The Smart Managed Narrow switch (SMN) is an industrial Ethernet switch with six Fast Ethernet ports in RJ45 format and two fiber optic ports in POF format. (FL SWITCH SMN 6TX/2POF-PN) By default upon delivery the switch operates in "PROFINET" mode.
FL SWITCH SFNT 15TX/FX, Standard function Ethernet switch with 15 RJ45 ports and 1 SC-D fiber optic port for extreme environments (-40°C ... +75°C). Provides automatic detection of data transmission speed of 10 or 100 Mbps (RJ45), autocrossing function, 12 V DC ... 48 V DC input voltage, redundant power supply capable with remote alarming.
