Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
AXL F BK S3
Weight
0.222 kg
This product is Not Cancellable/Not Returnable

AXL F BK S3 - Bus coupler

Axioline F, Bus coupler, Sercos, RJ45 jack, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connector

  • 2 Ethernet ports (with integrated switch)
  • Rotary coding switches for setting the Sercos address
  • Certified in accordance with Sercos V1.12
  • Supports Sercos V1.31
  • FSP-IO (Function Specific Profile-IO) for modular I/O devices
  • Minimum Sercos III cycle time of 31.25 µs
  • 8 connections (max. 4 consumer and max. 4 producer connections)
  • Cross communication is possible up to reaching the maximum number of connections
  • Synchronization between fieldbus and local bus
  • The typical cycle time of the S20 system bus is around 10 μs
  • Runtime in bus coupler is negligible (almost 0 µs)
  • Firmware can be updated
  • Supports the operation of Axioline Smart Elements
  • Supports passive Smart Elements (firmware version 1.35 or later)
  • Supports IOL-CONF (firmware version 1.35 or later)
Technical Specifications

Dimensions

Width45 mm
Height126.1 mm
Depth74 mm
Note on dimensionsThe depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Sercos

Number of interfaces2
Connection MethodRJ45 jack
Note on the connection methodAuto negotiation and autocrossing
Transmission Speed100 Mbps (full duplex)
Transmission physicsEthernet in RJ45 twisted pair

Axioline F local bus

Number of interfaces1
Connection MethodBus base module
Transmission Speed100 Mbps

Service

Number of interfaces1
Connection MethodUSB type C (from HW 05)
Connection MethodMicro USB type B (up to HW 04)

Sercos

Equipment typeSercos slave
System-specific protocolsSercos protocols Sercos
SpecificationSercos specification 1.31

System limits

Number of supported devicesmax. 63 (per station)
Number of local bus devices that can be connectedmax. 63

Product properties

Product familyAxioline F
Typeblock modular
Mounting Positionany (observe temperature derating)
Scope of deliveryincluding bus base module and Axioline F connector

Insulation characteristics

Overvoltage categoryII (IEC 60664-1, EN 60664-1)
Pollution degree2 (IEC 60664-1, EN 60664-1)

Potentials: Communications power UL feed-in (the supply of the Axioline F local bus UBus is generated from UL)

Supply Voltage24 V DC
Supply Voltage Range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current drawmax. 570 mA (2.0 A at UBus, UL = 24 V, up to HW 04)
Current drawmax. 670 mA (2.5 A at UBus, UL = 24 V, from HW 05)
Power consumptionmax. 13.7 W (2.0 A at UBus, UL = 24 V, up to HW 04)
Power consumptionmax. 16 W (2.5 A at UBus, UL = 24 V, from HW 05)
Protective circuitSurge protection; electronic
Protective circuitReverse polarity protection; electronic

Potentials: Axioline F local bus supply (UBus)

Supply Voltage5 V DC (via bus base module)
Power Supply Unitmax. 2 A (up to HW 04)
Power Supply Unitmax. 2.5 A (from HW 05)

Electrical isolation/isolation of the voltage ranges

Test voltage: Ethernet interface 1 / Ethernet interface 21500 V AC, 50 Hz, 1 min.
Test voltage: Ethernet interface 1 / 24 V communications voltage (UL) feed-in1500 V AC, 50 Hz, 1 min.
Test voltage: Ethernet interface 2 / 24 V communications voltage (UL) feed-in1500 V AC, 50 Hz, 1 min.
Test voltage: Ethernet interface 1 / functional ground1500 V AC, 50 Hz, 1 min.
Test voltage: Ethernet interface 2 / functional ground1500 V AC, 50 Hz, 1 min.
Test voltage: 24 V communications voltage (UL) feed-in / functional ground500 V AC, 50 Hz, 1 min.

Connection technology

Connection nameAxioline F connector
Note on the connection methodPlease observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.

Conductor connection

Connection MethodPush-in connection
Conductor cross section rigid0.2 mm² ... 1.5 mm²
Conductor cross section flexible0.2 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Stripping length8 mm

Axioline F connector

Connection MethodPush-in connection
Note on the connection methodPlease observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor cross section, rigid0.2 mm² ... 1.5 mm²
Conductor cross section, flexible0.2 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Stripping length8 mm

Ambient conditions

Ambient Temperature (Operation)-25 °C ... 60 °C (Mounting position: wall mounting on horizontal DIN rail)
Ambient Temperature (Operation)-25 °C ... 55 °C (Mounting position: any)
Degree of ProtectionIP20
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)5 % ... 95 % (non-condensing)

Standards and Regulations

Protection classIII (IEC 61140, EN 61140, VDE 0140-1)

Mounting

Mounting TypeDIN rail mounting
Mounting Positionany (observe temperature derating)
Accessories

Why Proax for Phoenix Contact 2701686?

Proax is an authorized distributor of Phoenix Contact 2701686 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability