Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
1068857
Weight
0.233 kg
This product is Not Cancellable/Not Returnable

AXL F BK PN TPS XC - Bus coupler

Axioline F, Bus coupler, PROFINET, RJ45 jack, Extreme conditions version, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connector

  • 2 Ethernet ports (with integrated switch)
  • Conformance with PROFINET specification V2.3
  • Supports PROFIsafe
  • Supports PROFIenergy
  • Supports PROFINET S2 system redundancy (firmware version 1.30 or later)
  • PROFINET RT and IRT
  • Minimum cycle time of PROFINET for RT and IRT is 250 μs
  • Firmware can be updated
  • Runtime in bus coupler is negligible (almost 0 µs)
  • Typical cycle time of the Axioline F local bus is around 10 μs
  • Web-based management
  • Supports the operation of Axioline Smart Elements
  • Supports passive Smart Elements (firmware version 1.30 or later)
  • Supports IOL-CONF (firmware version 1.30 and later)
  • Supports Diag+
  • Safe analog value processing with SAFE AI and other components
  • Can be used under extreme ambient conditions
  • Extended temperature range of -40 °C ... +70 °C (see “Tested successfully: use under extreme ambient conditions” in the data sheet)
  • Partially coated PCBs
Technical Specifications

Dimensions

Width45 mm
Height126.93 mm
Depth75 mm
Note on dimensionsThe depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

PROFINET

Number of interfaces2
Connection MethodRJ45 jack
Note on the connection methodAuto negotiation and autocrossing
Transmission Speed100 Mbps (full duplex)
Transmission physicsEthernet in RJ45 twisted pair

Axioline F local bus

Number of interfaces1
Connection MethodBus base module
Transmission Speed100 Mbps

Service

Number of interfaces1
Connection MethodUSB type C

System limits

Number of supported devicesmax. 63 (per station)
Number of local bus devices that can be connectedmax. 63

PROFINET

Device functionPROFINET device
SpecificationVersion 2.3
Conformance classConformance-Class C
Device ID1000hex
Vendor ID00B0hex

Product properties

Product familyAxioline F
Typeblock modular
Mounting Positionany
Scope of deliveryincluding bus base module and Axioline F connector
Special PropertiesExtreme conditions version

Insulation characteristics

Overvoltage categoryII (IEC 60664-1, EN 60664-1)
Pollution degree2 (IEC 60664-1, EN 60664-1)

Potentials: Communications power UL feed-in (the supply of the Axioline F local bus UBus is generated from UL)

Supply Voltage24 V DC
Supply Voltage Range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current drawmax. 690 mA (2.0 A on UBus, UL = 24 V)
Power consumptionmax. 13.5 W (2.0 A on UBus, UL = 24 V)
Protective circuitSurge protection; electronic
Protective circuitReverse polarity protection; electronic

Potentials: Axioline F local bus supply (UBus)

Supply Voltage5 V DC (via bus base module)
Power Supply Unitmax. 2 A

Electrical isolation/isolation of the voltage ranges

Test voltage: PROFINET interface 1 / PROFINET interface 21500 V AC, 50 Hz, 1 min.
Test voltage: PROFINET interface 1 / 24 V communications voltage (UL) feed-in1500 V AC, 50 Hz, 1 min.
Test voltage: PROFINET interface 2 / 24 V communications voltage (UL) feed-in1500 V AC, 50 Hz, 1 min.
Test voltage: PROFINET interface 1 / functional ground1500 V AC, 50 Hz, 1 min.
Test voltage: PROFINET interface 2 / functional ground1500 V AC, 50 Hz, 1 min.
Test voltage: 24 V communications voltage (UL) feed-in / functional ground500 V AC, 50 Hz, 1 min.

Connection technology

Connection nameAxioline F connector
Note on the connection methodPlease observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.

Conductor connection

Connection MethodPush-in connection
Conductor cross section rigid0.2 mm² ... 1.5 mm²
Conductor cross section flexible0.2 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Stripping length8 mm

Axioline F connector

Connection MethodPush-in connection
Note on the connection methodPlease observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor cross section, rigid0.2 mm² ... 1.5 mm²
Conductor cross section, flexible0.2 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Stripping length8 mm

Ambient conditions

Ambient Temperature (Operation)-25 °C ... 60 °C (Standard, applications with UL approval, use in zone 2 potentially explosive area)
Ambient Temperature (Operation)-40 °C ... 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.)
Degree of ProtectionIP20
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)5 % ... 95 % (non-condensing)

Standards and Regulations

Protection classIII (IEC 61140, EN 61140, VDE 0140-1)

ATEX

Identification II 3 G Ex ec IIC T4 Gc
CertificateUL 20 ATEX 2441X
References to standardsEN IEC 60079-0, EN IEC 60079-7

UKEX

Identification II 3 G Ex ec IIC T4 Gc
CertificatePxCIMA22UKEX2701949X
References to standardsEN IEC 60079-0, EN IEC 60079-7

IECEx

IdentificationEx ec IIC T4 Gc
CertificateIECEx ULD 20.0026X
References to standardsIEC 60079-0 Ed. 7, IEC 60079-7 Ed. 5.1

UL, USA/Canada

IdentificationcULus
CertificateE238705

UL Ex, USA / Canada

IdentificationClass I, Zone 2, AEx ec IIC T4
IdentificationClass I, Division 2, Groups A, B, C, D, T4
IdentificationEx ec IIC T4 Gc X
CertificateE366272
References to standardsUL 60079-0 Ed. 7 / CSA C22.2 NO. 60079-0 Ed. 4
References to standardsUL 60079-7 Ed. 5 / CSA C22.2 NO. 60079-7 Ed. 2

CCC / China-Ex

IdentificationEx ec IIC T4 Gc
Certificate, 2021122309114456
References to standardsGB/T 3836.1-2021, GB/T 3836.3-2021

Mounting

Mounting TypeDIN rail mounting
Mounting Positionany

Why Proax for Phoenix Contact AXL F BK PN TPS XC?

Proax is an authorized distributor of Phoenix Contact AXL F BK PN TPS XC and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Alternate NamesAXLFBKPNTPSXC
Pack Size1
Recommended

Available for order

Phoenix Contact Availability