Official DistributorSKU
MPN
EV-T2M4CC-DC150A-3,0M35ESBK11
Weight
0.005 kg
Series EV-T
EV-T2M4CC-DC150A-3,0M35ESBK11 - DC charging cable
CHARX connect standard, DC charging cable, with vehicle charging connector and open cable end, for charging electric vehicles (EV) with direct current (DC), with connected PP contact, with replaceable mating face frame, with analog temperature sensors, CCS type 2, IEC 62196-3, 150 A / 1000 V (DC), PHOENIX CONTACT logo, cable: 3 m, black, straight
- Complete product range
- The right charging cable for every application, from the carport to the charging park
- Convenient handling due to the ergonomic design
- Available with your logo on request - for consistent branding of your charging station
- Developed and produced in accordance with the IATF 16949 automotive standard and ISO 9001
Technical Specifications
Product properties
| Product family | CHARX connect standard |
| Application | for charging electric vehicles (EV) with direct current (DC) |
| Application | for installation at charging stations for electromobility (EVSE) |
| Type | DC charging cable |
| Type | with vehicle charging connector and open cable end |
| Design | with connected PP contact |
| Design | with replaceable mating face frame |
| Design | with analog temperature sensors |
| Technology | Combined Charging System |
| Affixed logo | PHOENIX CONTACT logo |
| Label | 14.1 mm x 44.8 mm (customer logo on request) |
| Charging standard | CCS type 2 |
| Charging mode | Mode 4 |
Electrical properties
| Type of signal transmission | Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121 |
| Note on the connection method | Crimp connection, cannot be disconnected |
| Coding | 1500 Ω (between PE and PP) |
| Coding | PP signal contact connected to cable |
| Temperature monitoring | 2x Pt 1000 |
| Type of charging current | DC |
| Charging power | 150 kW |
| Charging current | 150 A |
Power contact
| Number | 3 (PE, DC+, DC-) |
| Rated voltage | 1000 V DC |
| Rated current | 150 A (up to 40 °C) |
Signal contact
| Number | 2 (CP, PP) |
| Rated voltage | 30 V AC |
| Rated current | 2 A |
Temperature sensors (Pt 1000)
| Sensor Type | Pt 1000 |
| Standards/regulations | DIN EN 60751 |
| Attachment point | Sensor for the DC contacts |
| Switch-off temperature | 90 °C ±1 K (equivalent to a Pt 1000 value of 1346.5 Ω) |
| Long-term stability | 0.06 % (after 1000 hours at 130 °C) |
| Recommended measured current | 1 mA (1 V at 0°C) |
| Coefficient | 3850 ppm/K |
| Ambient Temperature | -50 °C ... 130 °C (Operation) |
Vehicle charging connector
| Width | 75 mm |
| Height | 139 mm |
| Depth | 267 mm |
Material specifications
| Color (Housing) | black (9005) |
| Color (Handle area) | gray (7042) |
| Color (Mating face) | black (9005) |
| Color (Protective cap) | black (9005) |
| Color (Cable) | black (9005) |
| Material (Vehicle charging connector) | Plastic |
| Material (Cable outer sheath) | TPE-U |
| Material (Contact surface) | Silver |
| Flammability rating according to UL 94 | V0 (Mating face) |
Cable/line
| Cable Length | 3 m ±45 mm |
| Wiring standards/regulations | prEN 50620/DIN EN 50620 |
| Cable weight | max. 1380.00 kg/km |
| Cable Type | Class 6 |
| Cable Type | straight |
| Cable structure | 2 x 35 mm² + 1 x 25 mm² + 3 x 2 x 0.75 mm² |
| External Cable Diameter | 25.90 mm ±0.4 mm |
| Outer sheath, material | TPE-U |
| Stripping length of the sheath | 140 mm ±10 mm |
| Stripping length | 140 mm ±10 mm |
| Cable resistance | ≤ 0.000554 Ω/m (based on a power core, at an ambient temperature of 20°C) |
| Bending Radius | min. 259 mm (10x Ø) |
Mechanical data
| Insertion/withdrawal cycles | > 10000 |
| Insertion force | < 100 N |
| Withdrawal force | < 100 N |
Ambient conditions
| Degree of protection (Vehicle charging connector) | IP44 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products) |
| Ambient Temperature (Operation) | -30 °C ... 40 °C |
| Ambient Temperature (Operation) | max. 55 °C (Current reduction required, observe the DC contact temperature limit value of 90°C) |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | 5000 m (above sea level) |
Standards
| Standards/regulations | IEC 62196-3 |
Why Proax for Phoenix Contact 1160486?
Proax is an authorized distributor of Phoenix Contact 1160486 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
CHARX connect standard, CCS type 2, DC charging cable, up to 500 A in Boost mode, 250 A Permanent, 1000 V DC, with vehicle charging connector and open cable end, cable: 7 m, black, straight, with connected PP contact, with replaceable mating face frame, with analog temperature sensors, PHOENIX CONTACT logo, IEC 62196-3, for charging electric vehicles (EV) with direct current (DC)
EV-T2M3C-1AC32A-4,0M6,0ESBK00 - CHARX connect, AC charging cable with Vehicle Connector, open cable end, with protective cap, Type 2, IEC 62196-2, cable: 4 m, straight- EV-T2M3C-3AC32A-4,0M6,0ESBK00 - CHARX connect, AC charging cable with Vehicle Connector, open cable end, with protective cap, Type 2, IEC 62196-2, cable: 4 m, straight
EV-T2M3SE24-3AC32A-0,7M6,0E10 - CHARX connect, Infrastructure charging socket, for charging electric vehicles (EV) with alternating current (AC), Type 2, IEC 62196-2, 32 A / 480 V (AC), Single wires, length: 0.7 m, locking actuator: 24 V, 4-pos., Rear panel mounting, PHOENIX CONTACT logo
EV-T2M3P-3AC32A-4,0M6,0ESBK00 - CHARX connect, AC charging cable with infrastructure plug, open cable end, with protective cap, Type 2, IEC 62196-2, cable: 4 m, straight
CHARX connect modular, Type 2, Infrastructure charging socket, 32 A , 480 V AC, Basic, Set, without single-core wires, locking actuator: 12 V, 4-pos., square, Rear panel mounting, M5 thread, housing: black, with square protective cover, for charging electric vehicles (EV) with alternating current (AC), PHOENIX CONTACT logo, IEC 62196-2
EV-T2M3S-E-LOCK12V - CHARX connect modular, Locking, Accessories, for attaching to infrastructure charging sockets, Type 2, GB/T, IEC 61851-1, Single wires, length: 0.5 m, locking actuator: 12 V, 4-pos.
EV-T2G4CC-DC80A-5,0M16ESBK11 - CHARX connect compact, DC charging cable, with vehicle charging connector and open cable end, for charging electric vehicles (EV) with direct current (DC), with connected PP contact, with analog temperature sensors, CCS type 2, IEC 62196-3, 80 A / 1000 V (DC), PHOENIX CONTACT logo, cable: 5 m, black, straight
EV-T2G3C-1AC32A-4,0M6,0ESBK01 - CHARX connect comfort, AC charging cable, with vehicle charging connector and open cable end, for charging electric vehicles (EV) with alternating current (AC) via type 2 vehicle charging inlets, with protective cap, Type 2, IEC 62196-2, 32 A / 250 V (AC), housing: black, gray, PHOENIX CONTACT logo, cable: 4 m, black, straight- CHARX connect comfort, Type 2, AC charging cable, 32 A Permanent, 480 V AC, with vehicle charging connector and open cable end, cable: 5 m, black, straight, with protective cap, housing: black, gray, PHOENIX CONTACT logo, IEC 62196-2, for charging electric vehicles (EV) with alternating current (AC) via type 2 vehicle charging inlets
EV-T2G3C-3AC32A-5,0M6,0ESBK11 - CHARX connect comfort, AC charging cable, with vehicle charging connector and open cable end, for charging electric vehicles (EV) with alternating current (AC) via type 2 vehicle charging inlets, with protective cap, Type 2, IEC 62196-2, 32 A / 480 V (AC), PHOENIX CONTACT logo, cable: 5 m, black, straight
EV-T1L2CC-DC125A-5,0M1ASBK01 - CHARX connect, DC charging cable with vehicle connector, open cable end, CCS type 1, SAE J1772, IEC 62196-3, cable: 5 m- EV-T1L2CC-DC125A-25,0FT1ASBK01 - CHARX connect, DC charging cable with vehicle connector, open cable end, CCS type 1, SAE J1772, IEC 62196-3, cable: 25 ft, NOTE: Cable management may be required.
EV-T1L2CC-DC60A-25FT6ASBK01 - CHARX connect, DC charging cable with vehicle connector, open cable end, CCS type 1, SAE J1772, IEC 62196-3, cable: 25 ft, NOTE: Cable management may be required.- EV-T1L2CC-DC60A-4,0M6ASBK01 - CHARX connect, DC charging cable with vehicle connector, open cable end, CCS type 1, SAE J1772, IEC 62196-3, cable: 4 m
- EV-T1L2CC-DC60A-5,0M6ASBK01 - CHARX connect, DC charging cable with vehicle connector, open cable end, CCS type 1, SAE J1772, IEC 62196-3, cable: 5 m
- EV-T1L2CC-DC60A-6,0M6ASBK01 - CHARX connect, DC charging cable with vehicle connector, open cable end, CCS type 1, SAE J1772, IEC 62196-3, cable: 6 m, NOTE: Cable management may be required.
EV-T2G3PC-1AC32A-4,0M6,0EHBK01 - CHARX connect comfort, Mobile AC charging cable, with vehicle charging connector and infrastructure charging plug, for charging electric vehicles (EV) with alternating current (AC) via type 2 vehicle charging inlets, with protective cap, Type 2, IEC 62196-2, 32 A / 250 V (AC), housing: black, gray, PHOENIX CONTACT logo, cable: 4 m, black, spiraled
EV-T2G3PC-1AC32A-4,0M6,0ESBK01 - CHARX connect comfort, Mobile AC charging cable, with vehicle charging connector and infrastructure charging plug, for charging electric vehicles (EV) with alternating current (AC) via type 2 vehicle charging inlets, with protective cap, Type 2, IEC 62196-2, 32 A / 250 V (AC), housing: black, gray, PHOENIX CONTACT logo, cable: 4 m, black, straight- CHARX connect comfort, Type 2, Mobile AC charging cable, 32 A Permanent, 250 V AC, with vehicle charging connector and infrastructure charging plug, cable: 8 m, black, straight, with protective cap, housing: black, gray, PHOENIX CONTACT logo, IEC 62196-2, for charging electric vehicles (EV) with alternating current (AC) via type 2 vehicle charging inlets