Official DistributorSKU
MPN
FA MCR-HT-1TS-I-OLP
Weight
0.187 kg
FA MCR-HT-1TS-I-OLP - Head-mounted transducer
Output loop-powered head transmitter for transmitting RTD and TC sensor signals, as well as from resistance and voltage sensors via 4 mA ... 20 mA. HART, Standard configuration, Screw connection
Technical Specifications
Product properties
| Product family | Field Analog |
| No. of channels | 1 |
| Configuration | Software |
| Configuration | HART |
Insulation characteristics
| Overvoltage category | II |
| Pollution degree | 2 |
Electrical properties
| Step response (0–99%) | 1 s (TC) |
| Step response (0–99%) | 1 s (RTD) |
Electrical isolation Input/output
| Test voltage | 2 kV AC (50 Hz, 60 s) |
Supply
| Supply Voltage Range | loop-powered, no external supply necessary |
| Supply Voltage Range | 10 V DC ... 36 V DC (Standard) |
Measurement
| Number of Inputs | 1 |
| Input voltage range | -20 mV ... 100 mV (Minimum measuring span: 5 mV) |
| Sensor types (RTD) that can be used | Pt, Ni, Cu sensors: 2, 3, 4-wire |
| Sensor types that can be used (TC) | A, B, C, D, E, J, K, L, N, R, S, T, U |
| Temperature measuring range | -250 °C ... 2500 °C (Range depending on the sensor type) |
| Temperature measuring range | ≥ 10 K (RTD) |
| Temperature measuring range | ≥ 50 K (TC) |
| Linear resistance measuring range | 10 Ω ... 2000 Ω (Minimum measuring span: 10 Ω) |
Signal: Current
| Current Output Signal | 4 mA ... 20 mA (HART) |
| Current Output Signal | 20 mA ... 4 mA (HART) |
| Max. current output signal | 23 mA |
| Load | (UL - 10 V) / 0.023 A |
| HART coding | FSK ± 0.5 mA |
| HART version | 7 |
| Transmission Speed | 1200 Baud |
| Mains frequency filter | 50/60 Hz |
| Communication resistance | ≥ 250 Ω |
| Switch-on delay | 7 s (HART) |
| Switch-on delay | 7 s (Measured value) |
Connection data
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 14 |
| Tightening torque | 0.5 Nm |
Ex data
| Ex installation (EPL) | Gc |
| Ex installation (EPL) | Div. 2 |
Data communication (bypass)
| Protocols Supported | HART |
Ambient conditions
| Degree of Protection | IP00 (upon installation in field housing IP66/67, NEMA 4X) |
| Ambient Temperature (Operation) | -40 °C ... 85 °C |
| Ambient temperature (storage/transport) | -50 °C ... 100 °C |
| Altitude | ≤ 4000 m (Above sea level) |
| Climatic class | C1 |
| Permissible humidity (operation) | 5 % ... 95 % (condensation permitted) |
CE
| Certificate | CE-compliant |
ATEX
| Identification | II 3 G Ex ec IIC T6 |
| Certificate | PxCIF20ATEX1145192U |
CSA
| Identification | Ex ec IIC T6...T4 |
Mounting
| Mounting Type | Installation |
| Mounting Type | DIN rail mounting |
| Assembly instructions | Installation in connecting head B in accordance with DIN EN 50446 |
Why Proax for Phoenix Contact 1145210?
Proax is an authorized distributor of Phoenix Contact 1145210 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
FA MCR-HT-FH - Field housing for the installation of head transmitters with or without display unit. For direct connection to the process.
FA MCR-HT-TS-I-OLP-PT - The output-loop-powered head transmitter transmits up to two sensor signals from RTD and TC sensors as well as from resistance-type sensors and voltage sensors and via HART_communication or 4 ... 20 mA, configurable. SIL2/3
FA MCR-EX-DS-I-I-OLP - Ex i, Output loop-powered process indicator for installation in the control cabinet. HART- FA MCR-EX-HT-TS-I-OLP-PT - The output loop-powered head transmitter transmits up to two sensor signals from RTD and TC sensors as well as from resistance-type sensors and voltage sensors via HART communication or 4 ... 20 mA, configurable. SIL 2/3, intrinsic safety.
FA MCR-EX-FD-TUI-UI-2REL-UP - Ex i, Process indicator, multifunctional, in field housing for monitoring and displaying analog measurement data. Universal inputs enable the connection of current, voltage, RTDs, and TCs. 2 relay change-over contact outputs and 1 analog output.. HART
FA MCR-EX-D-TUI-UI-2REL-UP - Ex i, Process indicator, multifunctional, in control panel component housing for monitoring and displaying analog measurement data. Universal inputs enable the connection of current, voltage, RTDs, and TCs. 2 relay change-over contact outputs and 1 analog output.. HART- FA MCR-DS-I-I-OLP - Output loop-powered process indicator for installation in the control cabinet. HART
FA MCR-FD-PM - Tube mounting set for FA MCR-FD-TUI-UI-2REL-UP (2907780) and FA MCR-EX-FD-TUI-UI-2REL-UP (2907781) multifunctional process displays. Can also be used for simplified wall mounting.- FA MCR-FD-TUI-UI-2REL-UP - Process indicator, multifunctional, in field housing for monitoring and displaying analog measurement data. Universal inputs enable the connection of current, voltage, RTDs, and TCs. 2 relay change-over contact outputs and 1 analog output..
FA MCR-FDS-PM - Tube mounting set for output loop-powered process display in FA MCR(-EX)-FDS-I-I-OLP field housing.
FA MCR-D-RM - The DIN rail mounting frame can be used to mount a display on a DIN rail, e.g., in the control cabinet. The DIN rail mounting frame can be used with the following digital displays: FA MCR-(EX)-DS-I-I-OLP, FA MCR-(EX)-D-TUI-UI-2REL-UP
FA MCR-D-TUI-UI-2REL-UP - Process indicator, multifunctional, in control panel component housing for monitoring and displaying analog measurement data. Universal inputs enable the connection of current, voltage, RTDs, and TCs. 2 relay change-over contact outputs and 1 analog output..
