Official DistributorSKU
MPN
FA MCR-FD-TUI-UI-2REL-UP
Weight
1.439 kg
FA MCR-FD-TUI-UI-2REL-UP - Digital display
Process indicator, multifunctional, in field housing for monitoring and displaying analog measurement data. Universal inputs enable the connection of current, voltage, RTDs, and TCs. 2 relay change-over contact outputs and 1 analog output..
Technical Specifications
Product properties
| Product family | Field Analog |
| Configuration | Keyboard |
| Configuration | Software |
Insulation characteristics
| Protection class | II |
| Overvoltage category | II |
| Pollution degree | 2 |
Functionality
| Configuration | Keyboard |
| Configuration | Software |
Electrical properties
| Test voltage | 2500 V |
| Test voltage | 2500 V |
| Test voltage output/power supply | 2500 V |
| Test voltage input/output | 500 V |
| Test voltage input/power supply | 2500 V |
Electrical isolation Input/output/power supply
| Electrical isolation | 375 V |
Supply
| Supply Voltage Range | 24 V AC/DC ... 230 V AC/DC (-20 % ... +10 %, 50 Hz ... 60 Hz) |
| Max. current consumption | 30 mA |
| Power consumption | ≤ 6.9 W |
Signal: Current
| Description of the input | Universal input |
| Number of Inputs | 1 |
| Input Signal | Current |
| Current Input Signal | 0 mA ... 20 mA +10 % |
| Current Input Signal | 4 mA ... 20 mA +10 % |
| Max. current input signal | < 150 mA |
| Available Input Sources | Current |
| Input resistance current input | 10 Ω |
| Transmitter supply voltage | > 16 V (22 mA) |
| Transmitter supply voltage range | 22.8 V ... 27.6 V (No-load) |
| Transmitter supply current | < 30 mA (Short-circuit and overload protection) |
| D/A converter resolution | 16 bit |
Signal: Voltage
| Description of the input | Universal input |
| Input Signal | Voltage |
| Voltage input signal | 0 V ... 10 V |
| Voltage input signal | 2 V ... 10 V |
| Voltage input signal | 0 V ... 5 V |
| Voltage input signal | 0 V ... 1 V |
| Voltage input signal | 1 V ... 5 V |
| Voltage input signal | -1 V ... 1 V |
| Voltage input signal | -10 V ... 10 V |
| Voltage input signal | -30 V ... 30 V |
| Voltage input signal | -100 mV ... 100 mV |
| Max. voltage input signal | ± 35 V (≥ 1 V) |
| Max. voltage input signal | ± 12 V (< 1 V) |
| Available Input Sources | Voltage |
| Input resistance of voltage input | > 1 MΩ |
Signal: Resistance
| Description of the input | Universal input |
| Input Signal | Resistor |
| Available Input Sources | Resistance: 30 Ω ... 3000 Ω |
Measurement
| Description of the input | Universal input |
| Configurable/programmable | Yes |
| Sensor types (RTD) that can be used | Pt, Ni, Cu sensors |
| Available Input Sources | Resistance thermometers |
| Temperature measuring range | -200 °C ... 1100 °C (Range depends on sensor type, adjustable) |
| Connection technology | 2-, 3-, 4-conductor |
| Measuring rate | 200 ms |
| Description of the input | Universal input |
| Configurable/programmable | Yes |
| Sensor types that can be used (TC) | J, K, T, N, B, S, R, U. L, C, D |
| Available Input Sources | Thermocouples |
| Temperature measuring range | -200 °C ... 2495 °C (Range depends on sensor type, adjustable) |
| Measuring rate | 200 ms |
Switching: Relay
| Contact switching type | 2 changeover contacts |
| Minimum Switching Voltage | 12 V |
| Maximum Switching Voltage | 30 V DC (3 A) |
| Maximum Switching Voltage | 230 V AC (3 A) |
| Min. switching current | 10 mA |
| Max. switching current | 3 A |
Switching: Transistor
| Output description | Open collector output |
| Number of Outputs | 1 |
| Contact switching type | Transistor |
| Maximum Switching Voltage | 28 V |
| Max. switching current | 200 mA |
Signal: Current
| Number of Outputs | 1 |
| Configurable/programmable | Yes |
| Current Output Signal | 0 mA ... 20 mA |
| Current Output Signal | 4 mA ... 20 mA |
| Max. current output signal | < 22 mA |
| Load/Output Load Current Output | ≤ 500 Ω (22 mA) |
| Ripple | < 10 mVPP (500 Ω) |
| D/A converter resolution | 13 bit |
| Number of positions displayed | 5 |
| Display | 7-segment LC display, with backlight, dot matrix for text/bar graph |
| Temperature coefficient, typical | 0.01 %/K |
Signal: Voltage
| Voltage output signal | 0 V ... 10 V |
| Voltage output signal | 2 V ... 10 V |
| Voltage output signal | 0 V ... 5 V |
| Voltage output signal | 1 V ... 5 V |
| Max. voltage output signal | < 11 V |
| Non-load voltage | 24 V DC (+15 %/-5 %) |
| Short-circuit current | < 25 mA |
| Ripple | < 10 mVPP (1000 Ω) |
| D/A converter resolution | 13 bit |
| Temperature coefficient, typical | 0.01 %/K |
Input, output, status, relay
| Connection Method | Push-in connection |
| Stripping length | 10 mm |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 14 |
Supply
| Connection Method | Screw connection |
| Stripping length | 10 mm |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 14 |
| Tightening torque | 0.6 Nm ... 0.6 Nm |
Data: T-PORT
| Connection Method | 4-pos. socket |
Data: USB
| Serial transmission speed | 38400 baud |
Dimensions
| Width | 199 mm |
| Height | 160 mm |
| Depth | 96 mm |
Material specifications
| Color | light grey (RAL 7035) |
| Housing Material | PBT GF30 |
Ambient conditions
| Degree of Protection | IP67 |
| Ambient Temperature (Operation) | -40 °C ... 50 °C (The readability of the display is no longer guaranteed at temperatures below -30 °C (-22 °F).) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Altitude | < 2000 m (Above sea level) |
| Climatic class | according to IEC 60654-1, class B2 |
| Permissible humidity (operation) | condensation permitted |
CE
| Certificate | CE-compliant |
UL, USA/Canada
| Identification | UL 61010 Recognized |
CSA
| Identification | CSA GP |
EMC data
| Noise immunity | IEC 61326 / NAMUR NE 21 |
| Noise emission | IEC 61326, class A |
Mounting
| Mounting Type | Wall mounting |
| Mounting Type | Tube mounting |
| Mounting Position | Max. viewing angle range +/- 45° from the centre line of the display in every direction |
Accessories
Why Proax for Phoenix Contact 2907780?
Proax is an authorized distributor of Phoenix Contact 2907780 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
FA MCR-FD-PM - Tube mounting set for FA MCR-FD-TUI-UI-2REL-UP (2907780) and FA MCR-EX-FD-TUI-UI-2REL-UP (2907781) multifunctional process displays. Can also be used for simplified wall mounting.
FA MCR-FDS-PM - Tube mounting set for output loop-powered process display in FA MCR(-EX)-FDS-I-I-OLP field housing.
FA MCR-EX-HT-TS-I-OLP-PT - The output loop-powered head transmitter transmits up to two sensor signals from RTD and TC sensors as well as from resistance-type sensors and voltage sensors via HART communication or 4 ... 20 mA, configurable. SIL 2/3, intrinsic safety.
FA MCR-EX-DS-I-I-OLP - Ex i, Output loop-powered process indicator for installation in the control cabinet. HART
FA MCR-EX-FD-TUI-UI-2REL-UP - Ex i, Process indicator, multifunctional, in field housing for monitoring and displaying analog measurement data. Universal inputs enable the connection of current, voltage, RTDs, and TCs. 2 relay change-over contact outputs and 1 analog output.. HART- FA MCR-DS-I-I-OLP - Output loop-powered process indicator for installation in the control cabinet. HART
FA MCR-EX-D-TUI-UI-2REL-UP - Ex i, Process indicator, multifunctional, in control panel component housing for monitoring and displaying analog measurement data. Universal inputs enable the connection of current, voltage, RTDs, and TCs. 2 relay change-over contact outputs and 1 analog output.. HART- FA MCR-HT-TS-I-OLP-PT - The output-loop-powered head transmitter transmits up to two sensor signals from RTD and TC sensors as well as from resistance-type sensors and voltage sensors and via HART_communication or 4 ... 20 mA, configurable. SIL2/3
FA MCR-HT-FH - Field housing for the installation of head transmitters with or without display unit. For direct connection to the process.
FA MCR-D-RM - The DIN rail mounting frame can be used to mount a display on a DIN rail, e.g., in the control cabinet. The DIN rail mounting frame can be used with the following digital displays: FA MCR-(EX)-DS-I-I-OLP, FA MCR-(EX)-D-TUI-UI-2REL-UP
FA MCR-D-TUI-UI-2REL-UP - Process indicator, multifunctional, in control panel component housing for monitoring and displaying analog measurement data. Universal inputs enable the connection of current, voltage, RTDs, and TCs. 2 relay change-over contact outputs and 1 analog output..
