Official DistributorSKU
MPN
ELR W3/ 2-500 MM
Weight
0.875 kg
Series ELR-W
ELR W3/ 2-500 MM - Reversing load relay
Electronic reversing load relay with motor management, for direct driving of equipment in the 3-phase network, for approximately 1 kW
- Optional connection to ELR-PB-GATEWAY
- Special ELR-MM EX devices suitable for use in the chemical and petrochemical industries. A corresponding Ex-type examination certificate has been issued.
- Continuous status monitoring
- Real power consumed calculated every 6.6 ms
- Switching of actuating/variable-speed drives, pumps, and tools with function, dirt or wear monitoring
- Display of apparent, real, and reactive power, currents, voltages, phase angle, cycle counter, and operating hours counter
- Freely parameterizable signaling and switching thresholds for underload/overload detection
Technical Specifications
Product properties
| Operating mode | 100% operating factor |
Electrical properties
| Number of phases | 3 |
| Mains type | 3-phase |
| Test voltage input/output | 2.5 kV |
| Reversing frequency | ≤ 2.5 Hz (at cos φ = 0.5) |
Supply
| Input name | Device supply |
| Nominal Supply Voltage | 24 V DC |
| Supply voltage range with reference to UVN | 0.8 ... 1.2 |
| Quiescent current | 80 mA |
| Protective circuit | Reverse polarity protection; Series polarity protection diode |
| Protective circuit | Surge protection |
| Operating voltage display | Green LED |
| Error indication | Red LED |
| Status display | Yellow LED |
Control
| Input name | Control input right/left |
| Nominal input voltage UN | 24 V DC |
| Input voltage range in reference to UN | 0.8 ... 1.2 |
| Input voltage range in reference to UN | 0.8 ... 1.2 |
| Typical input current at UN | 7 mA |
| Reaction time in normal load operation | < 35 ms |
| Typical response time | < 25 ms |
| Typical turn-off time | < 25 ms |
| Reaction time in normal load operation | < 35 ms |
| Switch-over frequency | < 2.5 Hz (at cos φ = 0.5) |
Current measurement
| Basic accuracy | ± 2 % (Of end value, cos(phi) 0.3 - 0.7) |
| Current Range | 0.1 A ... 2 A |
| Measuring via | Current transformer for any conductor current |
AC output
| Nominal Output Voltage | 500 V AC |
| Nominal output voltage range | 110 V AC ... 550 V AC |
| Peak offstate voltage | 1500 V |
| Mains frequency | 50 Hz |
| Mains frequency | 60 Hz |
| Load Current | 1.8 A (see derating curve) |
| Load current range | 150 mA |
| Leakage current | typ. 7 mA |
| Residual voltage | typ. 1.4 V |
| Surge current | 360 A (tp = 10 ms, at 25 °C) |
| Max. load value | 645 A2s |
| Protective circuit | RC element; RC element |
| Protective circuit | Surge protection |
| Surge voltage protection | > 880 V |
Acknowledging contacts O1-O4
| Number of Outputs | 4 |
| Nominal Output Voltage | UVN - 1 V |
| Continuous load current | max. 50 mA |
Control circuits
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 6 mm² |
| Conductor cross section flexible | 0.2 mm² ... 4 mm² |
| Conductor cross section AWG | 24 ... 10 |
Load circuit
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 6 mm² |
| Conductor cross section flexible | 0.2 mm² ... 4 mm² |
| Conductor cross section AWG | 24 ... 10 |
Data
| Interface | RS-232 |
| Transmission Speed | 4800 bit |
Dimensions
| Width | 62 mm |
| Height | 94 mm |
| Depth | 122 mm |
Material specifications
| Color | green (RAL 6021) |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -20 °C ... 60 °C |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
Air clearances and creepage distances between the power circuits
| Standards/regulations | DIN EN 50178 |
| Standards/regulations | safe isolation |
Power station requirements
| Standards/regulations | DWR 1300/ZXX01/DD/7080.8d |
EMC regulations
| Standards/regulations | EN 61000-6-2 |
| Standards/regulations | EN 61000-6-4 |
Mounting
| Assembly instructions | Can be aligned with > 20 mm spacing |
| Mounting Position | Vertical (horizontal DIN rail) |
Why Proax for Phoenix Contact 2982621?
Proax is an authorized distributor of Phoenix Contact 2982621 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2963569 - Electronic reversing load relay, with integrated soft starter, 3 x 8 A load current
ELR W3- 24DC/500AC-16, Three-phase solid-state reversing contactor with 24 V DC input, 16 A output current, zero voltage switch, optionally with thermal fuse
2297824 - "4 in 1" three-phase solid-state reversing contactor with 24 V DC input, 0.4 A output current and adjustable overload shutdown
2297031 - Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 2 A output current, with 24 V DC control voltage, adjustable overload shutdown, emergency stop function to SIL 3/PL e, and screw connection
2297109 - Hybrid motor starter for reversing 3~ AC motors up to 550 V AC, with 24 V DC input, 2.4 A output current, adjustable overload shutdown, and limited phase failure detection
2297057 - Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown, emergency stop function to SIL 3/PL e, and screw connection.
2900795 - Hybrid motor starter for reversing 3~ AC motors up to 550 V AC, with 24 V DC input, 9 A output current, adjustable overload shutdown, and limited phase failure detection
ELR W3-230AC/500AC- 2, Three-phase solid-state reversing contactor with 230 V AC input, 2 A output current, zero voltage switch, optionally with thermal fuse
2297044 - "4 in 1" three-phase semiconductor reversing contactor with 230 V AC input, 2 A output current, emergency stop function, and adjustable overload shutdown.
ELR W3-230AC/500AC- 9, Three-phase solid-state reversing contactor with 230 V AC input, 9 A output current, zero voltage switch, optionally with thermal fuse
2297060 - Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 230 V AC control voltage, adjustable overload shutdown, emergency stop function up to SIL 3/PL e, and screw connection
