Official DistributorSKU
MPN
ELR W3/ 9-400 S
Weight
0.79 kg
This product is Not Cancellable/Not Returnable
Series ELR-W
ELR W3/ 9-400 S - Power electronics
Electronic reversing load relay, with integrated soft starter, 3 x 8 A load current
- Parameterization is performed directly on the device via the display and keyboard
- Drive can be controlled locally via keyboard
- Start up time
- Friction time
- Torque start
- Stop time
- Torque stop
- Braking torque
Technical Specifications
Product properties
| Operating mode | 100% operating factor |
Electrical properties
| Number of phases | 3 |
| Mains type | 3-phase |
| Test voltage (Input/output) | 2.5 kV (50 Hz, 60 s) |
Control
| Input name | Control input right/left |
| Nominal Supply Voltage | 24 V DC |
| Supply voltage range with reference to UVN | 0.8 ... 1.2 |
| Nominal input voltage UN | 24 V DC |
| Input voltage range in reference to UN | 0.8 ... 1.2 |
| Input voltage range in reference to UN | 0.8 ... 1.2 |
| Quiescent current | 85 mA |
| Typical input current at UN | 5 mA |
| Rated actuating voltage UC | 24 V DC |
| Triggering voltage range | 19.2 V DC ... 28.8 V DC |
| Voltage range with reference to UC | 0.8 ... 1.2 |
| Voltage range with reference to UC | 0.8 ... 1.2 |
| Rated actuating current IC | 5 mA |
| Switch-on delay max. | < 35 ms |
| Switch-off delay max. | < 25 ms |
| Protective circuit | Reverse polarity protection; Series polarity protection diode |
| Protective circuit | Surge protection |
| Operating voltage display | Green LED |
| Error indication | Red LED |
| Status display | Yellow LED |
| Switch-over frequency | < 2.5 Hz (at cos φ = 0.5) |
AC output
| Rated operating voltage Ue | 400 V AC |
| Operating voltage range | 110 V AC ... 433 V AC |
| Maximum Switching Voltage | 440 V AC (L1/T1) |
| Maximum Switching Voltage | 440 V AC (L2/T2) |
| Maximum Switching Voltage | 440 V AC (L3/T3) |
| Peak offstate voltage | 1000 V |
| Mains frequency | 50 Hz |
| Mains frequency | 60 Hz |
| Continuous load current | 8 A (see derating curve) |
| Load current range | 150 mA ... 8 A (at 20 °C Tu, see derating) |
| Leakage current | 5 mA (IL1, in switched-off state) |
| Leakage current | 3 mA (IL2, in switched-off state) |
| Leakage current | 3 mA (IL3, in switched-off state) |
| Residual voltage | typ. 1.5 V (For IL) |
| Surge current | 230 A (tp = 10 ms, at 25 °C) |
| Max. load value | 265 A2s |
| Protective circuit | RC element; RC element |
| Protective circuit | Surge protection |
| Surge voltage protection | > 690 V |
Control circuits
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 6 mm² |
| Conductor cross section flexible | 0.2 mm² ... 4 mm² |
| Conductor cross section AWG | 24 ... 10 |
Load circuit
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 6 mm² |
| Conductor cross section flexible | 0.2 mm² ... 4 mm² |
| Conductor cross section AWG | 24 ... 10 |
Signaling
| Status display | Yellow LED |
| Operating voltage display | Green LED |
| Error indication | Red LED |
Dimensions
| Width | 62.5 mm |
| Height | 84.1 mm |
| Depth | 120 mm |
Material specifications
| Color | green (RAL 6021) |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -20 °C ... 60 °C |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
Standards and Regulations
| Standards/regulations | DIN EN 50178 |
Standards/regulations
| Standards/regulations | EN 61000-6-2 |
| Standards/regulations | EN 61000-6-4 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | Can be aligned with > 20 mm spacing |
| Mounting Position | Vertical (horizontal DIN rail) |
Why Proax for Phoenix Contact 2963569?
Proax is an authorized distributor of Phoenix Contact 2963569 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
ELR W3- 24DC/500AC-16, Three-phase solid-state reversing contactor with 24 V DC input, 16 A output current, zero voltage switch, optionally with thermal fuse
2297824 - "4 in 1" three-phase solid-state reversing contactor with 24 V DC input, 0.4 A output current and adjustable overload shutdown
2297031 - Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 2 A output current, with 24 V DC control voltage, adjustable overload shutdown, emergency stop function to SIL 3/PL e, and screw connection
2297109 - Hybrid motor starter for reversing 3~ AC motors up to 550 V AC, with 24 V DC input, 2.4 A output current, adjustable overload shutdown, and limited phase failure detection
2297057 - Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown, emergency stop function to SIL 3/PL e, and screw connection.
2900795 - Hybrid motor starter for reversing 3~ AC motors up to 550 V AC, with 24 V DC input, 9 A output current, adjustable overload shutdown, and limited phase failure detection
ELR W3-230AC/500AC- 2, Three-phase solid-state reversing contactor with 230 V AC input, 2 A output current, zero voltage switch, optionally with thermal fuse
2297044 - "4 in 1" three-phase semiconductor reversing contactor with 230 V AC input, 2 A output current, emergency stop function, and adjustable overload shutdown.
ELR W3-230AC/500AC- 9, Three-phase solid-state reversing contactor with 230 V AC input, 9 A output current, zero voltage switch, optionally with thermal fuse
2297060 - Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 230 V AC control voltage, adjustable overload shutdown, emergency stop function up to SIL 3/PL e, and screw connection
