Official Distributor
SKU
MPN
EMG 22-REL/KSR-120/21
Weight
0.066 kg
This product is Not Cancellable/Not Returnable
Series EMG
EMG 22-REL/KSR-120/21 - Relay Module
Relay module, with soldered-in miniature switching relay, contact (AgNi): medium to large loads, 1 changeover contact, input voltage 120 V AC/DC
- Safe isolation between coil and contact side
- Integrated input circuit and interference suppression circuit
Technical Specifications
Product properties
Application | Universal |
Operating mode | 100% operating factor |
Mechanical service life | approx. 5x 107 cycles |
Insulation characteristics
Insulation | Basic insulation |
Insulation | Safe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths |
Insulation | Basic insulation |
Insulation | Safe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths |
Overvoltage category | III |
Pollution degree | 2 |
Electrical properties
Maximum power dissipation for nominal condition | 0.48 W |
Test voltage (Winding/contact) | 5 kVrms (50 Hz, 1 min., winding/contact) |
Test voltage (Contact/contact) | 1 kV AC (50 Hz, 1 min., contact/contact) |
Rated Insulation Voltage | 260 V AC |
Rated surge voltage | 4 kV |
Coil side
Nominal input voltage UN | 120 V AC/DC |
Input voltage range | 102 V AC/DC ... 127.2 V AC/DC |
Input voltage range in reference to UN | 0.85 ... 1.06 |
Drive and function | monostable |
Typical input current at UN | 4 mA |
Typical response time | 8 ms |
Typical release time | 10 ms |
Protective circuit | Bridge rectifier; Bridge rectifier |
Protective circuit | Varistor; Varistor |
Operating voltage display | Yellow LED |
Switching
Contact switching type | Single contact, 1 changeover contact |
Type of switch contact | Single contact |
Contact Material | AgNi |
Maximum Switching Voltage | 250 V AC/DC |
Limiting Continuous Current | 6 A |
Maximum Inrush Current | 8 A |
Interrupting rating (ohmic load) max. | 144 W (at 24 V DC) |
Interrupting rating (ohmic load) max. | 58 W (at 48 V DC) |
Interrupting rating (ohmic load) max. | 48 W (at 60 V DC) |
Interrupting rating (ohmic load) max. | 50 W (at 110 V DC) |
Interrupting rating (ohmic load) max. | 80 W (at 220 V DC) |
Interrupting rating (ohmic load) max. | 1500 VA (for 250 V AC) |
Coil side
Connection Method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section rigid | 0.2 mm² ... 4 mm² |
Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG | 24 ... 12 |
Contact side
Connection Method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section rigid | 0.2 mm² ... 4 mm² |
Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG | 24 ... 12 |
Dimensions
Width | 22.5 mm |
Height | 75 mm |
Depth | 62.5 mm |
Material specifications
Color | green (RAL 6021) |
Ambient conditions
Degree of Protection | IP20 |
Ambient Temperature (Operation) | -20 °C ... 50 °C |
Ambient temperature (storage/transport) | -20 °C ... 70 °C |
Standards and Regulations
Standards/regulations | IEC 60664-1 |
Mounting
Mounting Type | DIN rail mounting |
Assembly instructions | in rows with zero spacing |
Mounting Position | any |
Why Proax for Phoenix Contact 2953964?
Proax is an authorized distributor of Phoenix Contact 2953964 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 10 |
Recommended