Official Distributor
SKU
MPN
EMG 22-REL/KSR-G 24/TRN24/SO62
Weight
0.084 kg
This product is Not Cancellable/Not Returnable
Series EMG
EMG 22-REL/KSR-G 24/TRN24/SO62 - Relay Module
Relay module, with miniature switching relay, with integrated n-p-n transistor control, for low control currents, contact (AgNi 90/10): Medium to large loads, two N/O contacts, nominal control voltage 24 V DC
Technical Specifications
Utilization restriction
EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Product properties
Mechanical service life | 3x 107 cycles |
Insulation characteristics
Insulation | Reinforced insulation |
Insulation characteristics: Air clearances and creepage distances, input/output
Insulation | Reinforced insulation |
Overvoltage category | III |
Pollution degree | 2 |
Insulation characteristics: Air and creepage distances, output/output
Insulation | Functional insulation |
Electrical properties
Maximum power dissipation for nominal condition | 0.6 W |
Air clearances and creepage distances, input/output
Rated Insulation Voltage | 260 V |
Rated surge voltage | 6 kV (1.2/50 μs) |
Air and creepage distances, output/output
Rated Insulation Voltage | 260 V |
Rated surge voltage | 2.2 kV (1.2/50 μs) |
Coil side
Nominal input voltage UN | 24 V DC |
Input voltage range | 19.2 V DC ... 26.4 V DC (20 °C) |
Typical input current at UN | 17 mA |
Typical response time | 12 ms |
Typical release time | 7 ms |
Protective circuit | Reverse polarity protection; Polarity protection diode |
Protective circuit | Freewheeling diode; Freewheeling diode |
Operating voltage display | Yellow LED |
Switching
Contact switching type | Single contact, 2 N/O contact |
Type of switch contact | Single contact |
Contact Material | AgNi |
Maximum Switching Voltage | 250 V AC |
Limiting Continuous Current | 4 A |
Interrupting rating (ohmic load) max. | 96 W (at 24 V DC) |
Interrupting rating (ohmic load) max. | 85 W (at 48 V DC) |
Interrupting rating (ohmic load) max. | 60 W (at 60 V DC) |
Interrupting rating (ohmic load) max. | 44 W (at 110 V DC) |
Interrupting rating (ohmic load) max. | 57 W (at 220 V DC) |
Interrupting rating (ohmic load) max. | 1000 VA (for 250 V AC) |
Coil side
Connection Method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section rigid | 0.2 mm² ... 4 mm² |
Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG | 24 ... 12 |
Contact side
Connection Method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section rigid | 0.2 mm² ... 4 mm² |
Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG | 24 ... 12 |
Dimensions
Width | 22.5 mm |
Height | 75 mm |
Depth | 100 mm |
Material specifications
Color | green (RAL 6021) |
Ambient conditions
Degree of Protection | IP20 |
Degree of protection (Installation location) | ≥ IP54 (Installation location) |
Ambient Temperature (Operation) | -20 °C ... 50 °C |
Altitude | ≤ 2000 m |
Air clearances and creepage distances, input/output
Standards/regulations | DIN EN 50178: 1998-04 |
Air and creepage distances, output/output
Standards/regulations | DIN EN 50178: 1998-04 |
Mounting
Mounting Type | DIN rail mounting |
Mounting Position | any |
Why Proax for Phoenix Contact 2944407?
Proax is an authorized distributor of Phoenix Contact 2944407 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 10 |
Recommended