Official Distributor
SKU
MPN
EMG 22-REL/KSR-230/21/AU/SO46
Weight
0.068 kg
This product is Not Cancellable/Not Returnable
Series EMG
EMG 22-REL/KSR-230/21/AU/SO46 - Relay Module
Plug-in relay interfaces for protection against interference on the control side, with soldered-in miniature switching relay, contacts (Au): small loads, 1 changeover contact, input voltage 230 V AC
- Use of AC output cards, resulting in residual AC currents
- Resistant to interference currents
- Applications with long control lines
- High relay release voltage
Technical Specifications
Utilization restriction
EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Product properties
Product family | EMG |
Application | Filter to prevent interference |
Mechanical service life | approx. 2x 107 cycles |
Insulation characteristics
Insulation | Basic insulation |
Insulation | Basic insulation |
Overvoltage category | III |
Pollution degree | 2 |
Electrical properties
Maximum power dissipation for nominal condition | 4.14 W |
Test voltage (Winding/contact) | 2.5 kV AC (50 Hz, 1 min., winding/contact) |
Coil side
Nominal input voltage UN | 230 V AC |
Input voltage range | 207 V AC ... 253 V AC (20 °C) |
Drive and function | monostable |
Drive (polarity) | polarized |
Typical input current at UN | 18 mA |
Typical response time | 10 ms |
Typical release time | 8 ms |
Protective circuit | Bridge rectifier; Bridge rectifier |
Protective circuit | Surge protection; Varistor |
Protective circuit | RC element; RC element |
Operating voltage display | Yellow LED |
Switching
Contact switching type | 1 changeover contact |
Type of switch contact | Double contact |
Contact Material | AgPd60, hard gold-plated |
Maximum Switching Voltage | 30 V AC |
Maximum Switching Voltage | 36 V DC |
Limiting Continuous Current | 0.5 A |
Maximum Inrush Current | 0.2 A |
Interrupting rating (ohmic load) max. | 5 W (at 24 V DC) |
Switching: when the gold layer is destroyed
Note | the following values are applicable if a gold layer is destroyed |
Maximum Switching Voltage | 125 V AC |
Maximum Switching Voltage | 150 V DC |
Limiting Continuous Current | 2 A |
Maximum Inrush Current | 2 A |
Interrupting rating (ohmic load) max. | 29 W (at 24 V DC) |
Interrupting rating (ohmic load) max. | 29 W (at 48 V DC) |
Interrupting rating (ohmic load) max. | 29 W (at 60 V DC) |
Coil side
Connection Method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section rigid | 0.2 mm² ... 4 mm² |
Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG | 24 ... 12 |
Contact side
Connection Method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section rigid | 0.2 mm² ... 4 mm² |
Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG | 24 ... 12 |
Dimensions
Width | 22.5 mm |
Height | 75 mm |
Depth | 62.5 mm |
Material specifications
Color | green (RAL 6021) |
Ambient conditions
Ambient Temperature (Operation) | -20 °C ... 40 °C |
Ambient temperature (storage/transport) | -20 °C ... 70 °C |
Standards and Regulations
Standards/regulations | IEC 60664 |
Standards/regulations | EN 50178 |
Mounting
Mounting Type | DIN rail mounting |
Mounting Position | any |
Why Proax for Phoenix Contact 2940061?
Proax is an authorized distributor of Phoenix Contact 2940061 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 10 |
Recommended