The figure shows version EMG 22,5 REL, with integrated n-p-n transistor control
Official DistributorSKU
MPN
EMG 22-REL/KSR-G 24/TRN 5
Weight
0.062 kg
This product is Not Cancellable/Not Returnable
Series EMG
EMG 22-REL/KSR-G 24/TRN 5 - Hybrid relay
Relay module, with miniature switching relay, with integrated NPN transistor control, for low control currents, contact (AgNi): medium to large loads, 1 changeover contact, 5 V DC nominal control voltage
- Low control current (terminal block B), type-dependent from 0.5 mA
- Safe isolation between coil and contact side
- Type-dependent positive or negative control current
- Integrated input circuit and interference suppression circuit
Technical Specifications
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Product properties
| Product family | EMG |
| Application | Universal |
| Operating mode | 100% operating factor |
| Mechanical service life | approx. 5x 107 cycles |
Insulation characteristics
| Insulation | Basic insulation |
| Insulation | Basic insulation |
| Overvoltage category | III |
| Pollution degree | 2 |
Electrical properties
| Maximum power dissipation for nominal condition | 0.5 W |
| Test voltage (Winding/contact) | 4 kV AC (50 Hz, 1 min., winding/contact) |
Coil side
| Nominal input voltage UN | 24 V DC |
| Input voltage range | 21.6 V DC ... 26.4 V DC (20 °C) |
| Drive and function | monostable |
| Drive (polarity) | polarized |
| Typical input current at UN | 21 mA |
| Typical response time | 9 ms |
| Typical release time | 10 ms |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Protective circuit | Freewheeling diode; Freewheeling diode |
| Operating voltage display | Yellow LED |
| Nominal control voltage | 5 V DC |
| Minimum Control Voltage | 2.7 V DC |
| Maximum Control Voltage | 5.25 V DC |
| Minimum Control Current | 2.6 mA |
| Maximum Control Current | 7.7 mA |
Control
| Nominal control voltage | 5 V DC |
| Minimum Control Voltage | 2.7 V DC |
| Maximum Control Voltage | 5.25 V DC |
| Minimum Control Current | 2.6 mA |
| Maximum Control Current | 7.7 mA |
Switching
| Contact switching type | 1 changeover contact |
| Type of switch contact | Single contact |
| Contact Material | AgNi |
| Maximum Switching Voltage | 250 V AC/DC |
| Limiting Continuous Current | 5 A |
| Maximum Inrush Current | 8 A |
| Interrupting rating (ohmic load) max. | 120 W (at 24 V DC) |
| Interrupting rating (ohmic load) max. | 60 W (at 48 V DC) |
| Interrupting rating (ohmic load) max. | 50 W (at 60 V DC) |
| Interrupting rating (ohmic load) max. | 50 W (at 110 V DC) |
| Interrupting rating (ohmic load) max. | 80 W (at 220 V DC) |
| Interrupting rating (ohmic load) max. | 1250 VA (for 250 V AC) |
Coil side
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
Contact side
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
Dimensions
| Width | 22.5 mm |
| Height | 75 mm |
| Depth | 62.5 mm |
Material specifications
| Color | green (RAL 6021) |
Ambient conditions
| Ambient Temperature (Operation) | -20 °C ... 50 °C |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
Standards and Regulations
| Standards/regulations | IEC 60664 |
| Standards/regulations | IEC 60664-1 |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | any |
Accessories
2947035 - Device marking label, width: 12 mm, area: 12 x 8 mm, e.g. for EML(10x7) R adhesive marking material
Why Proax for Phoenix Contact 2949787?
Proax is an authorized distributor of Phoenix Contact 2949787 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
Relay module, with miniature switching relay, with integrated n-p-n transistor control, for low control currents, contact (AgCdO): Medium to large loads, two N/O contacts, nominal control voltage 24 V DC
2949790 - Relay module, with miniature switching relay, with integrated PNP transistor control, for low control currents, contact (AgNi): medium to large loads, 1 changeover contact, nominal control voltage 5 V DC- 2952156 - Relay module, with miniature switching relay, with integrated PNP transistor control, for low control currents, contact (AgNi): medium to large loads, 1 changeover contact, nominal control voltage 12 V DC
- 2952169 - Relay module, with miniature switching relay, with integrated PNP transistor control, for low control currents, contact (AgNi): medium to large loads, 1 changeover contact, nominal control voltage 24 V DC
EMG 22-REL/KSR-120/21, Relay module, with soldered-in miniature switching relay, contact (AgNi): Medium to large loads, 1 PDT, input voltage 120 V AC/DC- Relay module, with soldered-in miniature switching relay, contact (AgNi): Medium to large loads, 2 PDT, input voltage 120 V AC/DC
- Relay module, with soldered-in miniature switching relay, contact (AgNi): Medium to large loads, 2 PDT, 12 V AC/DC input voltage
- Relay module, with soldered-in miniature switching relay, contact (AgNi): Medium to large loads, 2 PDT, input voltage 24 V AC/DC
- Relay module, with soldered-in miniature switching relay, contact (AgNi+Au): Small to large loads, 2 PDT, 24 V AC/DC input voltage
- Relay module, with soldered-in miniature switching relay, contact (AgNi+Au): Small to large loads, 1 PDT, 24 V AC/DC input voltage
