Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
EMG 22-REL/KSR-230/21/AU
Weight
0.065 kg
This product is Not Cancellable/Not Returnable
Series EMG

EMG 22-REL/KSR-230/21/AU - Relay Module

Relay module, with soldered-in miniature switching relay, contact (AgNi+Au): small to large loads, 1 changeover contact, input voltage 230 V AC/DC

  • Safe isolation between coil and contact side
  • Integrated input circuit and interference suppression circuit
Technical Specifications

Utilization restriction

EMC noteEMC: class A product, see manufacturer's declaration in the download area

Product properties

Product familyEMG
ApplicationUniversal
Operating mode100% operating factor
Mechanical service lifeapprox. 5x 107 cycles

Insulation characteristics

InsulationBasic insulation
InsulationSafe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths
InsulationBasic insulation
InsulationSafe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths
Overvoltage categoryIII
Pollution degree2

Electrical properties

Maximum power dissipation for nominal condition1.15 W
Test voltage (Winding/contact)5 kVrms (50 Hz, 1 min., winding/contact)
Rated Insulation Voltage260 V AC
Rated surge voltage4 kV

Coil side

Nominal input voltage UN230 V AC/DC
Input voltage range207 V AC/DC ... 243.8 V AC/DC (20 °C)
Drive and functionmonostable
Drive (polarity)polarized
Typical input current at UN5 mA
Typical response time8 ms
Typical release time10 ms
Protective circuitBridge rectifier; Bridge rectifier
Protective circuitVaristor; Varistor
Operating voltage displayYellow LED

Switching

Contact switching type1 changeover contact
Type of switch contactSingle contact
Contact MaterialAgNi, hard gold-plated
Maximum Switching Voltage30 V AC
Maximum Switching Voltage36 V DC
Limiting Continuous Current50 mA
Maximum Inrush Current50 mA
Interrupting rating (ohmic load) max.1.2 W (at 24 V DC)

Switching: when the gold layer is destroyed

Notethe following values are applicable if a gold layer is destroyed
Maximum Switching Voltage250 V AC/DC
Limiting Continuous Current6 A
Maximum Inrush Current8 A
Interrupting rating (ohmic load) max.144 W (at 24 V DC)
Interrupting rating (ohmic load) max.58 W (at 48 V DC)
Interrupting rating (ohmic load) max.48 W (at 60 V DC)
Interrupting rating (ohmic load) max.50 W (at 110 V DC)
Interrupting rating (ohmic load) max.80 W (at 220 V DC)
Interrupting rating (ohmic load) max.1500 VA (for 250 V AC)

Coil side

Connection MethodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section rigid0.2 mm² ... 4 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 12

Contact side

Connection MethodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section rigid0.2 mm² ... 4 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 12

Dimensions

Width22.5 mm
Height75 mm
Depth62.5 mm

Material specifications

Colorgreen (RAL 6021)

Ambient conditions

Degree of ProtectionIP20
Ambient Temperature (Operation)-20 °C ... 50 °C
Ambient temperature (storage/transport)-20 °C ... 70 °C

Standards and Regulations

Standards/regulationsIEC 60664-1

Mounting

Mounting TypeDIN rail mounting
Assembly instructionsin rows with zero spacing
Mounting Positionany

Why Proax for Phoenix Contact 2949295?

Proax is an authorized distributor of Phoenix Contact 2949295 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size10
Recommended
Sold in quantities of 10

Available for order

Phoenix Contact Availability