Official Distributor
SKU
MPN
RIF-1-RPT-LV-24AC/2X21
Weight
0.069 kg
Series RIF
RIF-1-RPT-LV-24AC/2X21 - Relay Module
Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 2 changeover contacts. Input voltage: 24 V AC
Technical Specifications
Notes
Notes on operation | FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21) |
Product properties
Product family | RIFLINE complete |
Application | Universal |
Operating mode | 100% operating factor |
Mechanical service life | approx. 107 cycles |
Insulation characteristics
Insulation | Safe isolation between input and output |
Insulation | Basic insulation between the changeover contacts |
Insulation | Safe isolation between input and output |
Insulation | Basic insulation between the changeover contacts |
Overvoltage category | III |
Pollution degree | 2 |
Electrical properties
Service life electrical | see diagram |
Maximum power dissipation for nominal condition | 0.79 W |
Test voltage (Winding/contact) | 4 kVrms (50 Hz, 1 min., winding/contact) |
Test voltage (Changeover contact/changeover contact) | 2.5 kVrms (50 Hz, 1 min., changeover contact/changeover contact) |
Rated surge voltage | 6 kV (Input/output) |
Rated surge voltage | 4 kV (between the changeover contacts) |
Coil side
Nominal input voltage UN | 24 V AC |
Input voltage range | 19.2 V AC ... 27.6 V AC (20 °C) |
Input voltage range in reference to UN | see diagram |
Mains frequency | 50/60 Hz |
Drive and function | monostable |
Drive (polarity) | polarized |
Typical input current at UN | 33 mA |
Typical response time | 3 ms ... 12 ms |
Typical release time range | 3 ms ... 20 ms |
Coil Voltage | 24 V AC |
Protective circuit | Varistor |
Operating voltage display | Yellow LED |
Switching
Contact switching type | 2 changeover contacts |
Type of switch contact | Single contact |
Contact Material | AgNi |
Maximum Switching Voltage | 250 V AC/DC |
Minimum Switching Voltage | 5 V (10 mA) |
Limiting Continuous Current | 8 A (see diagram) |
Maximum Inrush Current | 12 A (20 ms, N/O contacts) |
Min. switching current | 10 mA (5 V) |
Interrupting rating (ohmic load) max. | 192 W (at 24 V DC) |
Interrupting rating (ohmic load) max. | 96 W (at 48 V DC) |
Interrupting rating (ohmic load) max. | 60 W (at 60 V DC) |
Interrupting rating (ohmic load) max. | 44 W (at 110 V DC) |
Interrupting rating (ohmic load) max. | 57 W (at 220 V DC) |
Interrupting rating (ohmic load) max. | 2000 VA (for 250 V AC) |
Utilization category CB Scheme (IEC 60947-5-1) | AC15, 1.5 A/240 V (N/O contact) |
Utilization category CB Scheme (IEC 60947-5-1) | AC15, 2 A/250 V (N/C contact) |
Utilization category CB Scheme (IEC 60947-5-1) | DC13, 2 A/24 V (N/C contact) |
Utilization category CB Scheme (IEC 60947-5-1) | DC13, 0.2 A/250 V (N/O contact) |
Connection data
Connection Method | Push-in connection |
Stripping length | 8 mm |
Conductor cross section rigid | 0.14 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve) |
Conductor cross section flexible | 0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block) |
Conductor cross section AWG | 26 ... 16 (solid) |
Conductor cross section AWG | 26 ... 16 (flexible) |
Drill hole
Diameter | 3.2 mm |
Width | 16 mm |
Height | 96 mm |
Depth | 75 mm |
Material specifications
Color | gray (RAL 7042) |
Flammability rating according to UL 94 | V2 (Housing) |
Ambient conditions
Degree of protection (Relay base) | IP20 (Relay base) |
Degree of protection (Relay) | RT III (Relay) |
Ambient Temperature (Operation) | -40 °C ... 50 °C |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Corrosive gas test
Identification | ISA-S71.04. G3 Harsh Group |
Identification | EN 60068-2-60 |
Standards and Regulations
Standards/regulations | IEC 60947-5-1 |
Mounting
Mounting Type | DIN rail mounting |
Assembly instructions | in rows with zero spacing |
Mounting Position | any |
Accessories
Why Proax for Phoenix Contact 2903333?
Proax is an authorized distributor of Phoenix Contact 2903333 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 10 |
Recommended
- 2908215 - Preassembled relay module with Push-in connection, consisting of: relay base, safety relay with force-guided contacts in accordance with DIN EN 61810-3, plug-in display/interference suppression module, and retaining bracket, contact switching type: 2 changeover contacts, input voltage: 24 V DC