Name: RIF-1-RPT-LV-230AC/2X21
Brand: Phoenix Contact
SKU: PHX2903331
Price: 21.5300 CAD
Availability: BackOrder

All Relays Electromechanical Relays Industrial Relays

Official Distributor

By Phoenix Contact

SKU

MPN

2903331

Weight

0.07 kg

This product is Not Cancellable/Not Returnable

Series RIF

RIF-1-RPT-LV-230AC/2X21 - Relay Module

Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 2 changeover contacts. Input voltage: 230 V AC

Technical Specifications

Notes

Notes on operation

FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21)

Product properties

Product family	RIFLINE complete
Application	Universal
Operating mode	100% operating factor
Mechanical service life	approx. 107 cycles

Insulation characteristics

Insulation	Safe isolation between input and output
Insulation	Basic insulation between the changeover contacts
Insulation	Safe isolation between input and output
Insulation	Basic insulation between the changeover contacts
Overvoltage category	III
Pollution degree	2

Electrical properties

Service life electrical	see diagram
Maximum power dissipation for nominal condition	1.38 W
Test voltage (Winding/contact)	4 kVrms (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact)	2.5 kVrms (50 Hz, 1 min., changeover contact/changeover contact)
Rated surge voltage	6 kV (Input/output)
Rated surge voltage	4 kV (between the changeover contacts)

Coil side

Nominal input voltage U_N	230 V AC
Input voltage range	184 V AC ... 264.5 V AC (20 °C)
Input voltage range in reference to U_N	see diagram
Mains frequency	50/60 Hz
Drive and function	monostable
Drive (polarity)	polarized
Typical input current at U_N	6 mA
Typical response time	3 ms ... 12 ms
Typical release time range	3 ms ... 20 ms
Coil Voltage	230 V AC
Protective circuit	Varistor
Operating voltage display	Yellow LED

Switching

Contact switching type	2 changeover contacts
Type of switch contact	Single contact
Contact Material	AgNi
Maximum Switching Voltage	250 V AC/DC
Minimum Switching Voltage	5 V (10 mA)
Limiting Continuous Current	8 A (see diagram)
Maximum Inrush Current	12 A (20 ms, N/O contacts)
Min. switching current	10 mA (5 V)
Interrupting rating (ohmic load) max.	192 W (at 24 V DC)
Interrupting rating (ohmic load) max.	124 W (at 48 V DC)
Interrupting rating (ohmic load) max.	108 W (at 60 V DC)
Interrupting rating (ohmic load) max.	52 W (at 110 V DC)
Interrupting rating (ohmic load) max.	48 W (at 220 V DC)
Interrupting rating (ohmic load) max.	2500 VA (for 250 V AC)
Utilization category CB Scheme (IEC 60947-5-1)	AC15, 1.5 A/240 V (N/O contact)
Utilization category CB Scheme (IEC 60947-5-1)	AC15, 2 A/250 V (N/C contact)
Utilization category CB Scheme (IEC 60947-5-1)	DC13, 2 A/24 V (N/C contact)
Utilization category CB Scheme (IEC 60947-5-1)	DC13, 0.2 A/250 V (N/O contact)

Connection data

Connection Method	Push-in connection
Stripping length	8 mm
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Conductor cross section flexible	0.14 mm² ... 1.5 mm²
Conductor cross section flexible	0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross section flexible	0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
Conductor cross section AWG	26 ... 16 (solid)
Conductor cross section AWG	26 ... 16 (flexible)

Drill hole

Diameter	3.2 mm
Width	16 mm
Height	96 mm
Depth	75 mm

Material specifications

Color	gray (RAL 7042)
Flammability rating according to UL 94	V2 (Housing)

Ambient conditions

Degree of protection (Relay base)	IP20 (Relay base)
Degree of protection (Relay)	RT III (Relay)
Ambient Temperature (Operation)	-40 °C ... 50 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C

Corrosive gas test

Identification	ISA-S71.04. G3 Harsh Group
Identification	EN 60068-2-60

Standards and Regulations

Standards/regulations

IEC 60947-5-1

Mounting

Mounting Type	DIN rail mounting
Assembly instructions	in rows with zero spacing
Mounting Position	any

Accessories

FBS 2-6
3030336 - Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: red
FBS 2-6 BU
3036932 - Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: blue
FBS 2-6 GY
3032237 - Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: gray
FBS 2-8
3030284 - Plug-in bridge, pitch: 8.2 mm, number of positions: 2, color: red
FBS 2-8 BU
3032567 - Plug-in bridge, pitch: 8.2 mm, number of positions: 2, color: blue
FBS 2-8 GY 7042
3032541 - Bridge for potential distribution
STP 5-2
0800967 -
UC-TM 16
0819217 -
UC-TMF 16
0819262 -
NS 35/ 7,5 PERF 2000MM
0801733 - DIN rail perforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver
NS 35/ 7,5 UNPERF 2000MM
0801681 - DIN rail, unperforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver
NS 35/ 7,5 WH PERF 2000MM
1204119 - DIN rail perforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver
NS 35/ 7,5 WH UNPERF 2000MM-VPE 10
1204122 - DIN rail, unperforated, Pack of 10 (20 m), acc. to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver
NS 35/ 7,5 AL UNPERF 2000MM
0801704 - DIN rail, unperforated, Pack of 25 (50 m), acc. to EN 60715, material: Aluminum, uncoated, Standard profile, color: silver
NS 35/ 7,5 ZN PERF 2000MM
1206421 - DIN rail perforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, galvanized, Standard profile, color: silver
NS 35/ 7,5 ZN UNPERF 2000MM
1206434 - DIN rail, unperforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, galvanized, Standard profile, color: silver
NS 35/ 7,5 CU UNPERF 2000MM-VPE 10
0801762 - DIN rail, unperforated, Pack of 10 (20 m), acc. to EN 60715, material: Copper, uncoated, Standard profile, color: copper-colored
NS 35/ 7,5 CAP
1206560 - DIN rail end piece, for DIN rail NS 35/7.5
NS 35/15 PERF 2000MM
1201730 - DIN rail perforated, Pack of 25 (50 m), similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver
NS 35/15 UNPERF 2000MM
1201714 - DIN rail, unperforated, Pack of 25 (50 m), similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver
NS 35/15 WH PERF 2000MM
0806602 - DIN rail perforated, Pack of 25 (50 m), similar to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: white
NS 35/15 WH UNPERF 2000MM-VPE 10
1204135 - DIN rail, unperforated, Pack of 10 (20 m), similar to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver
NS 35/15 AL UNPERF 2000MM
1201756 - DIN rail, unperforated, similar to EN 60715, material: Aluminum, uncoated, Standard profile, color: silver
NS 35/15 ZN PERF 2000MM
1206599 - DIN rail perforated, Pack of 25 (50 m), similar to EN 60715, material: Steel, galvanized, Standard profile, color: silver
NS 35/15 ZN UNPERF 2000MM
1206586 - DIN rail, unperforated, Pack of 25 (50 m), similar to EN 60715, material: Steel, galvanized, Standard profile, color: silver
NS 35/15 CU UNPERF 2000MM-VPE 10
1201895 - DIN rail, unperforated, Pack of 10 (20 m), similar to EN 60715, material: Copper, uncoated, Standard profile, color: copper-colored
NS 35/15 CAP
1206573 - DIN rail end piece, for DIN rail NS 35/15
NS 35/15-2,3 UNPERF 2000MM-VPE 10
1201798 - DIN rail, unperforated, Pack of 10 (20 m), acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile 2.3 mm, color: silver
CLIPFIX 35
3022218 - Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
CLIPFIX 35-5
3022276 - Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
E/NS 35 N
0800886 - End clamp, width: 9.5 mm, color: gray
MPS-MT
0201744 - Test plug, with solder connection up to 1 mm2 conductor cross section, number of positions: 1, color: gray
MPS-IH WH
0201663 - Insulating sleeve, color: white
MPS-IH RD
0201676 - Insulating sleeve, color: red
MPS-IH BU
0201689 - Insulating sleeve, color: blue
MPS-IH YE
0201692 - Insulating sleeve, color: yellow
MPS-IH GN
0201702 - Insulating sleeve, color: green
MPS-IH GY
0201728 - Insulating sleeve, color: gray
MPS-IH BK
0201731 - Insulating sleeve, color: black
ZB 5 :UNBEDRUCKT
1050004 -
ZB 5,LGS:FORTL.ZAHLEN
1050017 -
ZB 5,QR:FORTL.ZAHLEN
1050020 -
ZB 5,LGS:GLEICHE ZAHLEN
1050033 -
ZB 5,LGS:L1-N,PE
1050415 -
UC-TM 5
0818108 -
0824581
Marker for terminal blocks - UC-TM 5 CUS
UCT-TM 5
0828734 -
ZB 15:UNBEDRUCKT
0811972 -
0824945
Zack marker strip - ZB 15 CUS
ZB 15,LGS:L1-N,PE
0811998 -

Why Proax for Phoenix Contact RIF-1-RPT-LV-230AC/2X21?

Proax is an authorized distributor of Phoenix Contact RIF-1-RPT-LV-230AC/2X21 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time

Highly Trained Staff

Live Chat

Technical Support

Local Inventory

60+ Years Experience

Additional Information

Alternate Names	RIF1RPTLV230AC2X21
Pack Size	1

Recommended

RIF-1-RPT-LV-230AC/2X21AU
2903327 - Preassembled relay module with Push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 2 changeover contacts. Input voltage: 230 V AC
RIF-1-RPT-LV-230AC/2X21MS
2905292 - Preassembled relay module with Push-in connection, consisting of: relay base, relay retaining bracket, plug-in interference suppression module, and power contact relay with test button and integrated status LED. Contact switching type: 2 changeover contacts. Input voltage: 230 V AC
RIF-1-RPT-LV-230AC/1X21
2903339 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 1 changeover contact. Input voltage: 230 V AC
RIF-1-RPT-LV-230AC/1X21AU
2903335 - Preassembled relay module with Push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 1 changeover contact. Input voltage: 230 V AC
RIF-1-RPT-LV-230AC/1X21MS
2905290 - Preassembled relay module with Push-in connection, consisting of: relay base, relay retaining bracket, plug-in interference suppression module, and power contact relay with test button and integrated status LED. Contact switching type: 1 changeover contact. Input voltage: 230 V AC
RIF-1-RPT-LV-24AC/1X21
2903341 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 1 changeover contact. Input voltage: 24 V AC
RIF-1-RPT-LV-24AC/1X21AU
2903337 - Preassembled relay module with Push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 1 changeover contact. Input voltage: 24 V AC
RIF-1-RPT-LV-24AC/2X21
2903333 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 2 changeover contacts. Input voltage: 24 V AC
RIF-1-RPT-LV-24AC/2X21AU
2903329 - Preassembled relay module with Push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 2 changeover contacts. Input voltage: 24 V AC
RIF-1-RPT-LV-24AC/2X21MS
1049232 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 2 changeover contacts. Input voltage: 24 V AC
RIF-1-RPT-LV-120AC/2X21
2903332 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 2 changeover contacts. Input voltage: 120 V AC
RIF-1-RPT-LV-120AC/2X21AU
2903328 - Preassembled relay module with Push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 2 changeover contacts. Input voltage: 120 V AC
RIF-1-RPT-LV-120AC/2X21MS
2909775 - Preassembled relay module with Push-in connection, consisting of: relay base, relay retaining bracket, plug-in interference suppression module, and power contact relay with test button and integrated status LED. Contact switching type: 2 changeover contacts. Input voltage: 120 V AC
RIF-1-RPT-LV-120AC/1X21
2903340 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 1 changeover contact. Input voltage: 120 V AC
RIF-1-RPT-LV-120AC/1X21AU
2903336 - Preassembled relay module with Push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 1 changeover contact. Input voltage: 120 V AC
RIF-1-RPT-LV-120AC/1X21MS
2909776 - Preassembled relay module with Push-in connection, consisting of: relay base, relay retaining bracket, plug-in interference suppression module, and power contact relay with test button and integrated status LED. Contact switching type: 1 changeover contact. Input voltage: 120 V AC
RIF-1-RPT-MH-230AC/1X21
1021593 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, and metal retaining bracket. Contact switching type: 1 changeover contact. Input voltage: 230 V AC
RIF-1-RPT-LDP-24DC/2X21
2903334 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 2 changeover contacts. Input voltage: 24 V DC
RIF-1-RPT-LDP-24DC/2X21/FG
2908215 - Preassembled relay module with Push-in connection, consisting of: relay base, safety relay with force-guided contacts in accordance with DIN EN 61810-3, plug-in display/interference suppression module, and retaining bracket, contact switching type: 2 changeover contacts, input voltage: 24 V DC
RIF-1-RPT-LDP-24DC/2X21AU
2903330 - Preassembled relay module with Push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 2 changeover contacts. Input voltage: 24 V DC

Available for order