Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
2909740
Weight
0.11 kg
This product is Not Cancellable/Not Returnable
Series RIF

RIF-2-RPT-LV-120AC/4X21/EX - Relay Module

Pre-assembled relay module consisting of: relay base, function plug-in module, power contact relay, and retaining bracket, approval in accordance with ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2, Push-in connection, 4 changeover contacts, Varistor, Input voltage: 120 V AC

Technical Specifications

Utilization restriction

EMC noteEMC: class A product, see manufacturer's declaration in the download area

Product properties

Product familyRIFLINE complete
ApplicationClass I, Division 2
Applicationpotentially explosive areas
Operating mode100% operating factor
Mechanical service lifeapprox. 2x 107 cycles

Insulation characteristics

InsulationBasic insulation
InsulationBasic insulation
Overvoltage categoryIII
Overvoltage categoryII (Zone 2)
Pollution degree2

Electrical properties

Maximum power dissipation for nominal condition1.56 W
Test voltage (Winding/contact)2.5 kVrms (50 Hz, 1 min., winding/contact)
Test voltage (Contact/contact)2 kVrms (50 Hz, 1 min., contact/contact)
Rated Insulation Voltage250 V AC
Rated surge voltage2.5 kV

Coil side

Nominal input voltage UN120 V AC
Input voltage range96 V AC ... 144 V AC (20 °C)
Input voltage range in reference to UNsee diagram
Mains frequency50/60 Hz
Drive and functionmonostable
Drive (polarity)polarized
Typical input current at UN13 mA
Typical response time5 ms ... 15 ms
Typical release time range5 ms ... 20 ms
Coil Voltage120 V AC
Protective circuitVaristor
Operating voltage displayYellow LED

Switching

Contact switching type4 changeover contacts
Type of switch contactSingle contact
Contact MaterialAgNi
Maximum Switching Voltage250 V AC/DC
Minimum Switching Voltage5 V (24 mA)
Limiting Continuous Current5 A (see diagram)
Maximum Inrush Current16 A (20 ms, N/O contacts)
Min. switching current5 mA (24 V)
Interrupting rating (ohmic load) max.120 W (at 24 V DC)
Interrupting rating (ohmic load) max.124 W (at 48 V DC)
Interrupting rating (ohmic load) max.108 W (at 60 V DC)
Interrupting rating (ohmic load) max.52 W (at 110 V DC)
Interrupting rating (ohmic load) max.48 W (at 220 V DC)
Interrupting rating (ohmic load) max.1250 VA (for 250 V AC)
Switching capacity2 A (at 24 V, DC13)
Switching capacity0.22 A (at 120 V, DC13)
Switching capacity0.11 A (at 250 V, DC13)
Switching capacity1.5 A (at 24 V, AC15)
Switching capacity1.5 A (at 120 V, AC15)
Switching capacity1 A (at 240 V, AC15)

Connection data

Connection MethodPush-in connection
Stripping length8 mm
Conductor cross section rigid0.14 mm² ... 1.5 mm²
Conductor cross section flexible0.14 mm² ... 1.5 mm²
Conductor cross section flexible0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross section flexible0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
Conductor cross section AWG26 ... 16 (solid)
Conductor cross section AWG26 ... 16 (flexible)

Drill hole

Diameter3.2 mm
Width31 mm
Height96 mm
Depth75 mm

Material specifications

Colorgray (RAL 7042)
Flammability rating according to UL 94V2 (Housing)

Ambient conditions

Degree of protection (Relay base)IP20 (Relay base)
Degree of protection (Relay)RT III (Relay)
Ambient Temperature (Operation)-40 °C ... 50 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

ATEX

Identification II 3G Ex ec nC IIC T4 Gc
CertificateIBExU17ATEXB014X

UKCA Ex (UKEX)

Identification II 3G Ex ec nC IIC T4 Gc
CertificatePxcIF21UKEX2909741X

IECEx

IdentificationEx ec nC IIC T4 Gc
CertificateIECEx IBE 17.0032X

UL, USA/Canada

IdentificationClass I, Div. 2, Groups A, B, C, D T4
IdentificationClass I, Zone 2, Group IIC

Corrosive gas test

IdentificationISA-S71.04. G3 Harsh Group
IdentificationEN 60068-2-60

Standards and Regulations

Standards/regulationsIEC 60947-5-1
Standards/regulationsIEC 61508-1

Ex zone

Standards/regulationsEN/IEC 60079-0
Standards/regulationsEN/IEC 60079-7
Standards/regulationsEN/IEC 60079-15

Mounting

Mounting TypeDIN rail mounting
Assembly instructionsin rows with zero spacing
Mounting Positionany
Accessories

Why Proax for Phoenix Contact RIF-2-RPT-LV-120AC/4X21/EX?

Proax is an authorized distributor of Phoenix Contact RIF-2-RPT-LV-120AC/4X21/EX and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Alternate NamesRIF2RPTLV120AC4X21EX
Pack Size10
Recommended
Sold in quantities of 10

Available for order