Official Distributor
SKU
MPN
RIF-2-RPT-LV-230AC/4X21/EX
Weight
0.108 kg
Series RIF
RIF-2-RPT-LV-230AC/4X21/EX - Relay Module
Pre-assembled relay module consisting of: relay base, function plug-in module, power contact relay, and retaining bracket, approval in accordance with ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2, Push-in connection, 4 changeover contacts, Varistor, Input voltage: 230 V AC
Technical Specifications
Utilization restriction
EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Product properties
Product family | RIFLINE complete |
Application | Class I, Division 2 |
Application | potentially explosive areas |
Operating mode | 100% operating factor |
Mechanical service life | approx. 2x 107 cycles |
Insulation characteristics
Insulation | Basic insulation |
Insulation | Basic insulation |
Overvoltage category | III |
Overvoltage category | II (Zone 2) |
Pollution degree | 2 |
Electrical properties
Maximum power dissipation for nominal condition | 1.5 W |
Test voltage (Winding/contact) | 2.5 kVrms (50 Hz, 1 min., winding/contact) |
Test voltage (Contact/contact) | 2 kVrms (50 Hz, 1 min., contact/contact) |
Rated Insulation Voltage | 250 V AC |
Rated surge voltage | 2.5 kV |
Coil side
Nominal input voltage UN | 230 V AC |
Input voltage range | 184 V AC ... 276 V AC (20 °C) |
Input voltage range in reference to UN | see diagram |
Mains frequency | 50/60 Hz |
Drive and function | monostable |
Drive (polarity) | polarized |
Typical input current at UN | 6.5 mA |
Typical response time | 5 ms ... 15 ms |
Typical release time range | 5 ms ... 20 ms |
Coil Voltage | 230 V AC |
Protective circuit | Varistor |
Operating voltage display | Yellow LED |
Switching
Contact switching type | 4 changeover contacts |
Type of switch contact | Single contact |
Contact Material | AgNi |
Maximum Switching Voltage | 250 V AC/DC |
Minimum Switching Voltage | 5 V (24 mA) |
Limiting Continuous Current | 5 A (see diagram) |
Maximum Inrush Current | 16 A (20 ms, N/O contacts) |
Min. switching current | 5 mA (24 V) |
Interrupting rating (ohmic load) max. | 120 W (at 24 V DC) |
Interrupting rating (ohmic load) max. | 124 W (at 48 V DC) |
Interrupting rating (ohmic load) max. | 108 W (at 60 V DC) |
Interrupting rating (ohmic load) max. | 52 W (at 110 V DC) |
Interrupting rating (ohmic load) max. | 48 W (at 220 V DC) |
Interrupting rating (ohmic load) max. | 1250 VA (for 250 V AC) |
Switching capacity | 2 A (at 24 V, DC13) |
Switching capacity | 0.22 A (at 120 V, DC13) |
Switching capacity | 0.11 A (at 250 V, DC13) |
Switching capacity | 1.5 A (at 24 V, AC15) |
Switching capacity | 1.5 A (at 120 V, AC15) |
Switching capacity | 1 A (at 240 V, AC15) |
Connection data
Connection Method | Push-in connection |
Stripping length | 8 mm |
Conductor cross section rigid | 0.14 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve) |
Conductor cross section flexible | 0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block) |
Conductor cross section AWG | 26 ... 16 (solid) |
Conductor cross section AWG | 26 ... 16 (flexible) |
Drill hole
Diameter | 3.2 mm |
Width | 31 mm |
Height | 96 mm |
Depth | 75 mm |
Material specifications
Color | gray (RAL 7042) |
Flammability rating according to UL 94 | V2 (Housing) |
Ambient conditions
Degree of protection (Relay base) | IP20 (Relay base) |
Degree of protection (Relay) | RT III (Relay) |
Ambient Temperature (Operation) | -40 °C ... 50 °C |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
ATEX
Identification | II 3G Ex ec nC IIC T4 Gc |
Certificate | IBExU17ATEXB014X |
UKCA Ex (UKEX)
Identification | II 3G Ex ec nC IIC T4 Gc |
Certificate | PxcIF21UKEX2909741X |
IECEx
Identification | Ex ec nC IIC T4 Gc |
Certificate | IECEx IBE 17.0032X |
UL, USA/Canada
Identification | Class I, Div. 2, Groups A, B, C, D T4 |
Identification | Class I, Zone 2, Group IIC |
Corrosive gas test
Identification | ISA-S71.04. G3 Harsh Group |
Identification | EN 60068-2-60 |
Standards and Regulations
Standards/regulations | IEC 60947-5-1 |
Standards/regulations | IEC 61508-1 |
Ex zone
Standards/regulations | EN/IEC 60079-0 |
Standards/regulations | EN/IEC 60079-7 |
Standards/regulations | EN/IEC 60079-15 |
Mounting
Mounting Type | DIN rail mounting |
Assembly instructions | in rows with zero spacing |
Mounting Position | any |
Accessories
Why Proax for Phoenix Contact 2909739?
Proax is an authorized distributor of Phoenix Contact 2909739 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 10 |
Recommended