Official DistributorSKU
MPN
VAL-SEC-T2-380DC-P
Weight
0.062 kg
Series VAL-SEC-T2
VAL-SEC-T2-380DC-P - Type 2 surge protection plug
Replacement plug for surge protective devices from the VALVETRAB SEC product range for DC power sources.
Technical Specifications
Product properties
| Product family | SEC Family |
| IEC test classification | II |
| IEC test classification | T2 |
| EN type | T2 |
| IEC power supply system | DC |
| Type | Male |
| Number of Positions | 1 |
| Surge protection fault message | optical |
Insulation characteristics
| Overvoltage category | III |
| Pollution degree | 2 |
Electrical properties
| Nominal voltage UN | 350 V DC ... 400 V DC |
Connection data
| Connection Method | pluggable |
Dimensions
| Width | 11.7 mm |
| Height | 46.4 mm |
| Depth | 59.4 mm |
| Horizontal pitch | 0.6 Div. |
Material specifications
| Color | light grey (RAL 7035) |
| Flammability rating according to UL 94 | V-0 |
| CTI value of material | 600 |
| Insulating material | PA6.6-FR 20% GF |
| Insulating material | PBT-FR |
| Material group | I |
| Housing Material | PA 6.6-FR 20 % GF |
| Housing Material | PBT-FR |
Protective circuit
| Mode of protection | (DC+) - (DC-) |
| Mode of protection | (DC+/DC-) - PE |
| Direction of action | (DC+/DC-) - PE |
| Nominal voltage UN | 350 V DC ... 400 V DC |
| Maximum continuous voltage UC | 450 V DC |
| Residual current IPE | ≤ 350 µA DC |
| Nominal discharge current In (8/20) µs | 20 kA |
| Maximum discharge current Imax (8/20) µs | 40 kA |
| Impulse discharge current (10/350) µs, charge | 0.5 As |
| Impulse discharge current (10/350) µs, specific energy | 0.25 kJ/Ω |
| Impulse discharge current (10/350) µs, peak value limp | 1 kA |
| Short-circuit current rating ISCCR | 0.1 kA (without backup fuse) |
| Short-circuit current rating ISCCR | 6 kA (for 20 A gG/B backup fuse) |
| Voltage protection level Up | ≤ 1.5 kV |
| Residual voltage Ures | ≤ 1.5 kV (at In) |
| Residual voltage Ures | ≤ 1.3 kV (at 10 kA) |
| Residual voltage Ures | ≤ 1.2 kV (at 5 kA) |
| Residual voltage Ures | ≤ 1.1 kV (at 4 kA) |
| Residual voltage Ures | ≤ 1 kV (at 2 kA) |
| TOV behavior at UT | 551 V DC (5 s / withstand mode) |
| Response time tA | ≤ 25 ns |
| Max. backup fuse with V-type through wiring | 20 A (gG / B at ISCCR > 200 A) |
| Max. backup fuse with V-type through wiring | 10 A (gG/B at ISCCR > 100 A) |
| Max. backup fuse with branch wiring | 20 A (gG / B at ISCCR > 200 A) |
| Max. backup fuse with branch wiring | 10 A (gG/B at ISCCR > 100 A) |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 80 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 6000 m (amsl) |
| Permissible humidity (operation) | 5 % ... 95 % |
| Shock (operation) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Vibration (Operation) | 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
UL specifications
| Maximum continuous operating voltage MCOV | 450 V DC |
| Nominal discharge current In | 20 kA |
| Mode of protection | (DC+) - G |
| Mode of protection | (DC-) - G |
| Nominal Voltage | 400 V DC |
| Power distribution system | DC |
| Measured limiting voltage MLV | 1640 V |
| SPD Type | 4CA |
Standards and Regulations
| Standards/specifications | IEC 61643-11 |
| Note | 2011 |
EN 61643-11
| Standards/specifications | EN 61643-11 |
| Note | 2012 |
Mounting
| Mounting Type | on base element |
Accessories
Why Proax for Phoenix Contact 2907880?
Proax is an authorized distributor of Phoenix Contact 2907880 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
Replacement plug for surge arresters from the VALVETRAB SEC product range for L-N and L-PEN paths.
