Official DistributorSKU
MPN
RAD-NAM4-IFS
Weight
0.188 kg
RAD-NAM4-IFS - I/O extension module
Radioline - I/O extension module, 4 NAMUR digital input module used in Radioline and PROFIBUS PA MUX I/O systems. Fulfills the NAMUR proximity sensor standard EN 60947-5-6, and communication to the head stations for Radioline systems and the FB-MUX/HS...PA via the T-BUS connector installed on the DIN rail. This module has channel-to-channel isolation.
- Extended temperature range of -40 °C … +70 °C
- Easy module replacement even during operation (hot swap)
- Easy startup via thumbwheel
- Approved for use in zone 2
Technical Specifications
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Product properties
| MTTF | 1065 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) |
| MTTF | 449 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day)) |
| MTTF | 85 Years (Telcordia standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day)) |
Insulation characteristics
| Overvoltage category | II |
| Degree of pollution | 2 |
Electrical properties
| Electrical isolation | 500 V AC (NAMUR digital I/O - 50 Hz, 1 min, test voltage) |
| Test voltage | 500 V AC (50 Hz, 1 min.) |
| Maximum power dissipation for nominal condition | 1.54 W |
Supply
| Supply Voltage Range | 19.2 V DC ... 30.5 V DC (DIN rail connector) |
| Max. current consumption | ≤ 64 mA (At 24 V DC, at 25°C) |
Digital
| Non-load voltage | ~ 8 V DC |
| Switching hysteresis | ≤ 0.2 mA |
| Description of the input | Digital input |
| Number of Inputs | 4 |
| Available Input Sources | NAMUR proximity sensors (EN 60947-5-6) |
| Available Input Sources | Floating switch contacts |
| Available Input Sources | Switch contacts with resistance circuit |
| Current Input Signal | ≤ 1.2 mA (blocking) |
| Current Input Signal | ≥ 2.1 mA (conductive) |
| Min. voltage input signal | 0 V DC |
| Max. voltage input signal | 30.5 V DC |
| Switching level "0" signal | 0 V DC ... 4 V DC |
| Switching level "1" signal | 10 V DC ... 30.5 V DC |
Connection data
| Connection Method | Screw connection |
| Stripping length | 7 mm |
| Conductor cross section, rigid min. | 0.2 mm² |
| Conductor cross section, rigid max. | 2.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section AWG min. | 24 |
| Conductor cross section AWG max. | 14 |
Signaling
| Status display | Green LED (supply voltage, PWR) |
| Status display | Green LED (bus communication, DAT) |
| Status display | Red LED (periphery error, ERR) |
| Status display | Yellow LED (digital input, DI1) |
| Status display | Yellow LED (digital input, DI2) |
| Status display | Yellow LED (digital input, DI3) |
| Status display | Yellow LED (digital input, DI4) |
| Status display | Red LED (Short circuit/Line break, E1) |
| Status display | Red LED (Short circuit/Line break, E2) |
| Status display | Red LED (Short circuit/Line break, E3) |
| Status display | Red LED (Short circuit/Line break, E4) |
Dimensions
| Width | 17.5 mm |
| Height | 113 mm |
| Depth | 114.5 mm |
Material specifications
| Color | green |
| Flammability rating according to UL 94 | V0 |
| Housing Material | PA 6.6-FR |
Characteristics
| Line fault detection | Break 0.05 mA < IIN < 0.35 mA |
| Line fault detection | Short circuit 100 Ω < RSensor < 360 Ω |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 70 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Altitude | 2000 m |
| Permissible humidity (operation) | 20 % ... 95 % (non-condensing) |
Conformity/Approvals
| Conformance | CE-compliant |
| CCC | Ex ec IIC T4 Gc |
Ex data
| ATEX | IBExU 17ATEXB011X; II 3 G; Ex ec IIC T4 Gc |
| IECEx | IECEx IBE 17.0029X; Ex ec IIC T4 Gc |
| UL, USA / Canada | Class I, Div. 2, Groups A, B, C, D T4Class I, Zone 2, AEx ec IIC T4, Ex ec IIC T4 Gc X |
Standards and Regulations
| Standard designation | Ex Directive (ATEX) |
| Standards/specifications | EN 60079-0 |
Accessories
Why Proax for Phoenix Contact 2316275?
Proax is an authorized distributor of Phoenix Contact 2316275 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Best Sellersin Wireless I/O
2901540 - Radioline - 900 MHz wireless transceiver with RS-232/485 interface, can be extended with I/O modules, RSMA (female) antenna connection, point-to-point, star, and mesh networks up to 250 stations, range of up to 32 km (line of sight), use in North America
2903447 - Radioline - USB data cable for communication between the PC and Radioline devices, energy supply for diagnostics and configuration via the USB port of the PC, cable length: 2 m / 6.5 ft
2901541 - Radioline - 2.4 GHz wireless transceiver with RS-232/RS-485 interface, can be extended with I/O modules, RSMA (female) antenna connection, point-to-point, star, and mesh networks up to 250 stations, range of up to 5 km (with a clear line of sight), for worldwide use
2901533 - Radioline - I/O extension module, 2 digital inputs and outputs (0 ... 250 V AC/DC) and 1 analog input (0/4 ... 20 mA) and output (0/4 ... 20 mA, 0 ... 10 V)
2904035 - Radioline - I/O extension module, 4 Pt 100 inputs (-50°C ... +250°C / -58 °F ... 482 °F)
2901539 - Radioline - I/O extension module, 8 digital inputs (0 ... 30.5 V DC) or 2 pulse inputs up to 100 Hz
2702877 - Radioline - 900 MHz wireless transceiver with six integrated I/O channels, NEMA 4X enclosure, N (female) antenna connection, omnidirectional antenna, point-to-point, star, and mesh networks up to 250 stations, range of up to 32 km (line of sight), for use in North America
