Official DistributorSKU
MPN
VAL-MS 1500DC-PV-ST
Weight
0.085 kg
Series VAL-MS
VAL-MS 1500DC-PV-ST - Type 2 surge protection plug
Pack of three replacement plugs for PV arrester combinations from the VAL-MS 1500DC-PV-... product range
- Increased safety, thanks to compliance with standard EN 50539-11
- Reliable contact, thanks to integrated rotating latch
- Easy replacement, thanks to plug-in arresters
- Optimum inverter protection, thanks to low protection level
- Efficient replacement of defective plugs, thanks to visual status indicator
- Protection against mismatching, thanks to keyed plugs and base elements
Technical Specifications
General
| Note | The device is intended for touch proof installation in a housing. Ensure that there is a gap of at least 8 mm between the active and grounded parts in the connection area. |
Product properties
| Product family | VALVETRAB MS |
| IEC test classification | PV II |
| IEC test classification | PV T2 |
| EN type | T2 |
| IEC power supply system | DC |
| Type | Male |
| Distance between live and grounded parts | 8 mm |
| Installation location | Interior |
| Installation location of the disconnect device | Internal |
| Accessibility | Accessible |
| SPD failure behavior | OCFM (Open-Circuit Failure Mode) |
| Surge protection fault message | optical |
Insulation characteristics
| Overvoltage category | III |
| Pollution degree | 2 |
Connection data
| Connection Method | pluggable |
Dimensions
| Width | 17.5 mm |
| Height | 52.4 mm |
| Depth | 55.3 mm |
| Horizontal pitch | 1 Div. |
Material specifications
| Color | black (RAL 9005) |
| Flammability rating according to UL 94 | V-0 |
| CTI value of material | 600 |
| Insulating material | PA 6.6-FR |
| Insulating material | PBT-FR |
| Material group | I |
| Housing Material | PA 6.6-FR |
| Housing Material | PBT-FR |
Protective circuit
| Direction of action | (L+)-PE & (L-)-PE & (L+)-(L-) |
| Standby power consumption PC | ≤ 250.00 mVA |
| Nominal discharge current In (8/20) µs | 15 kA |
| Maximum discharge current Imax (8/20) µs | 30 kA |
| Voltage protection level Up | ≤ 2.5 kV |
| Residual voltage Ures | ≤ 1.9 kV (at 3 kA) |
| Residual voltage Ures | ≤ 2.1 kV (at 5 kA) |
| Residual voltage Ures | ≤ 2.2 kV (at 10 kA) |
| Residual voltage Ures | ≤ 2.5 kV (at 15 kA) |
| Residual voltage Ures | ≤ 2.7 kV (at 20 kA) |
| Residual voltage Ures | ≤ 2.9 kV (at 30 kA) |
| Residual voltage Ures | ≤ 3 kV (at 40 kA) |
| Response time tA | ≤ 25 ns |
Protective circuit DC voltage side (DC)
| Open circuit voltage UOCSTC | ≤ 625 V DC |
| Maximum discharge current Imax (8/20) µs | 30 kA |
| Response time tA | ≤ 25 ns |
| Nominal discharge current In (8/20) µs | 15 kA |
| Continuous operating current ICPV | < 350 µA |
| Maximum continuous operating voltage UCPV | 750 V DC |
| Short-circuit current rating ISCPV | 2000 A |
| Residual voltage Ures | ≤ 1.9 kV (at 3 kA) |
| Residual voltage Ures | ≤ 2.1 kV (at 5 kA) |
| Residual voltage Ures | ≤ 2.2 kV (at 10 kA) |
| Residual voltage Ures | ≤ 2.5 kV (at 15 kA) |
| Residual voltage Ures | ≤ 2.7 kV (at 20 kA) |
| Residual voltage Ures | ≤ 2.9 kV (at 30 kA) |
| Residual voltage Ures | ≤ 3 kV (at 40 kA) |
| Voltage protection level Up | ≤ 2.5 kV |
| Standby power consumption PC | ≤ 250.00 mVA |
Additional technical data
| Maximum discharge current Imax (8/20) µs | 40 kA |
| Nominal discharge current In (8/20) µs | 20 kA (4x (5x In | 120 s) | 30 min)) |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 85 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Altitude | ≤ 3000 m (amsl) |
| Permissible humidity (operation) | 5 % ... 95 % |
| Shock (operation) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Vibration (Operation) | 5g (5-500 Hz/2.5 h/XYZ) |
UL specifications
| Maximum continuous operating voltage MCOV | 1500 V DC |
| Short-circuit current rating (SCCR) | 50 kA |
| Voltage protection rating VPR | 4 kV |
| Nominal discharge current In | 10 kA |
| Mode of protection | (DC+) - (DC-) |
| Mode of protection | (DC+) - G |
| Mode of protection | (DC-) - G |
| Nominal Voltage | 1500 V DC |
| Power distribution system | DC PV |
| SPD Type | 1CA |
Standards and Regulations
| Standards/specifications | EN 61643-31 |
| Note | 2019 |
| Standards/specifications | IEC 61643-31 |
| Note | 2018 |
Mounting
| Mounting Type | on base element |
Why Proax for Phoenix Contact 1033727?
Proax is an authorized distributor of Phoenix Contact 1033727 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
Surge arrester for 2-pos. isolated DC voltage systems 1000 V DC, for DIN rail mounting, 3-pos. base element, three pluggable temperature-monitored protective elements, for PE free of leakage current, status message on each connector.
Surge arrester for 2-pos. isolated DC voltage systems 1000 V DC, for DIN rail mounting, 3-pos. base element with remote indication contact, three pluggable temperature-monitored protective elements, for PE leakage current free, status message on each connector.
Surge arrester for 2-pos. isolated and grounded DC voltage systems 1000 V DC, for DIN rail mounting, 3-pos. base element (L+, L-, ground), three pluggable temperature-monitored varistors, status message on each connector.
Surge arrester for 2-pos. isolated and grounded DC voltage systems 1000 V DC, for DIN rail mounting, 3-pos. base element (L+, L-, ground) with remote indication contact, three pluggable temperature-monitored varistors, status message on each connector.
