IT Enclosure Accessories

SR Installation kits for swing frames, small, for W: 600 mm

DK Mounting kit, 2 U, For 482.6 mm (19") equipment

Installation in 800 mm enclosure width: The installation kit consists of 4 depth members to accommodate profile rails. One pack is sufficient to configure one or two 19" mounting levels. For extremely heavy installed equipment it is advisable to use an additional depth member in the middle. The front cut-out makes cable routing easier in the case of complete configuration.

DK Mounting angles additional fastening attachment, 482.6 mm (19"), For L-shaped mounting angles, For W: 800 mm, For TS

To support heavy slide-in electronic equipment, 19" (482.6 mm) in the swing frame.

DK Blanking panel, 482.6 mm (19"), 1 U, Toolless fixing, RAL 9005

DK Blanking panel, 482.6 mm (19"), 1 U, Toolless fixing, RAL 7035

DK Slide rail, 1 U, D: 675 mm, 80 kg, static, For two 482.6 mm (19") attachment level (front+rear), distance between levels:: 745 mm, static installation, for 482.6 mm (19") system punchings

1U

Installation in 800 mm enclosure width: The installation kit consists of 4 depth members to accommodate profile rails. One pack is sufficient to configure one or two 19" mounting levels. For extremely heavy installed equipment it is advisable to use an additional depth member in the middle. The front cut-out makes cable routing easier in the case of complete configuration.

SWING PANEL WMSP2424C

SR Installation kit for swing frame, large, without cover, with 130°-hinge, Load capacity < 1500 N, For W: 1200 mm

SR Swing frame, large, with trim panel, for TS, VX SE, for W: 800 mm, (40 U), Mounting position side

SR Swing frame, large, with trim panel, for TS, VX SE, for W: 800 mm, (45 U), Mounting position side

DK Slide rail, 1 U, D: 475 mm, 80 kg, static, For two 482.6 mm (19") attachment level (front+rear), distance between levels:: 545 mm, static installation, for 482.6 mm (19") system punchings

DK Slide rail, Support surface Width: 30 mm, 1 U, depth-variable, 20 kg, static, distance between levels: 550-750 mm, For TS IT, TE

SR Swing frame stay, with 180°-hinge

DK Slide rail, 1 U, D: 575 mm, 80 kg, static, For two 482.6 mm (19") attachment level (front+rear), distance between levels:: 645 mm, static installation, for 482.6 mm (19") system punchings

SWING PANEL BRACKET KIT 180

DK Slide rail, support surface width: 25 mm, depth-variable, 80 kg, For two 482.6 mm (19")-mounting angles (front+rear), distance between levels:: 400-600 mm