IT Enclosure Accessories

DK Support strips

DK Fibre-optic splicing box

DK Patch panel

DK Patch panel

DK Einbauwinkel, For 482.6 mm (19") mounting angles, For W: 600/1200 mm

DK Einbauwinkel, For 482.6 mm (19") mounting angles, For W: 800 mm

Installation in 800 mm enclosure width: The installation kit consists of 4 depth members to accommodate profile rails. One pack is sufficient to configure one or two 19" mounting levels. For extremely heavy installed equipment it is advisable to use an additional depth member in the middle. The front cut-out makes cable routing easier in the case of complete configuration.

DK Adhesive measurement strip, 482.6 mm (19"), Labelling range 1-56 U

DK Slide rail, support surface WxD: 85x324 mm, 80 kg, static, distance between levels:: 395 mm, For TE

DK Slide rail, support surface WxD: 85x424 mm, 80 kg, static, distance between levels:: 495 mm, For TE

DK Slide rail, support surface WxD: 85x524 mm, 80 kg, static, distance between levels:: 595 mm, For TE

TS Infill panels, 482.6 mm (19"), horizontal for Adapter-Profile, for H: 1800/2200 mm

TS Infill panels, 482.6 mm (19"), horizontal for Adapter-Profile, for H: 1600/2000 mm

TS Slide rail for TS adaptor section, two-sided mounting, for D: 500 mm

TS Slide rail for TS adaptor section, two-sided mounting, for D: 600 mm

Used to seal unused areas within the 482.6 mm (19") mounting level.

Used to seal unused areas within the 482.6 mm (19") mounting level.

DK Slide rail, 1 U, D: 275 mm, 80 kg, static, For two 482.6 mm (19") attachment level (front+rear), distance between levels:: 345 mm, static installation, for 482.6 mm (19") system punchings

DK Slide rail, 1 U, D: 375 mm, 80 kg, static, For two 482.6 mm (19") attachment level (front+rear), distance between levels:: 445 mm, static installation, for 482.6 mm (19") system punchings

DK 19"-Small components box, shielded, 4 U, for one pair of 482.6 mm (19") mounting angles, Sheet steel