Popular Brands in { name }

Discover { name } at Proax - Canada's top automation distributor. Easy pick-up, fast shipping. Explore now.

Shop { name } Online

**Here are some possible reasons why:**
- You may’ve typed the wrong search term, such as a misspelled product name or special characters/symbols.
- We might not carry the product you're looking for

Please try refining your search by not using special characters.

**Are these not the issues? Feel free to contact us and we'll assist you as quickly as possible.**

Search

B10d Value

Operations to Bottom Position 968 000

Operations to Middle Position 2 million

20 million

Cable Length

10 m

24 in

0.2 m

Cable Size

18 AWG

Certification Agency

cURus

Kiwa

Inspecta

Communication interface

Contacts

Connection configuration

Depends on bottom part

Cable

Cable gland and 10 screw connection

M12-8 male

6 leads, 150 mm each

Cable gland and 5 screw connection

M12-5 male

Cannon 12 male pins

3 leads, 190 mm each

6 leads, 1200 mm each

2 leads, 290 mm each

3 leads, 1250 mm each

Cable gland and 16 screw connection

4 leads, 200 mm each

Connection Type

M12 4-Pin Mini Male Connector

M8 4-Pin Micro Male Connector

M12 8-Pin Mini Male Connector

M12 10-Pin Mini Male Connector

Electrical connection

10-Pin Female Mini Connector

4-Pin Female Mini Connector

4-Pin Female Micro Connector

8-Pin Female Mini Connector

4-Pin Male Mini Connector

4-Pin Male Micro Connector

8-Pin Male Mini Connector

Enabling Contacts

Two contacts

Extension cable

Material

Rubber

Monitor Switch Contact

None

1 NC (grip output)

1 NC (grip) + 1NC (release)

2 NC (grip) + 1NC (release)

4 NC (grip) + 1NC (release)

3 NC (grip) + 1NC (release)

Number of Contacts CO

Number of Contacts NC

Number of Contacts NO

Number of Pins

Performance level (PL)

Up to e

Product Net Depth / Length

340 mm

50 mm

60 mm

72 mm

13.5 mm

52 mm

40.8 mm

110 mm

70 mm

90.5 mm

80 mm

7 mm

35 mm

90 mm

3 mm

18 mm

75 mm

Product Net Height

157 mm

71 mm

29.25 mm

200 mm

100 mm

254 mm

56 mm

22 mm

189 mm

155 mm

73 mm

26 mm

Product Net Weight

0.139 kg

0.01 kg

0.154 kg

0.04 kg

0.064 kg

0.225 kg

0.4 kg

0.3 kg

0.019 kg

0.311 kg

1.52 kg

0.13 kg

0.072 kg

0.004 kg

0.317 kg

0.334 kg

0.314 kg

0.046 kg

0.091 kg

Product Net Width

33 mm

34 mm

26.55 mm

106 mm

364 mm

78 mm

40 mm

Pushbutton Switch Contact

Momentary operation switch (2 NO)

Emergency stop switch (2 NC)

Second Connection Type

M12 4-Pin Mini Female Connector

M8 4-Pin Micro Female Connector

Technical Information

Operating force: Approx. 15 N for three-position button (ON), Approx. 45 N for three-position button (OFF), Approx. 2.5 N for top/front pushbutton; Mechanical service life: 1 million cycles, top to middle position, 100 000 cycles, middle to bottom position, and top/front push button

Foff: 20 N; Mechanical service life: > 1 million cycles, top to middle position, > 100 000 cycles, middle to bottom position

Foff: 17 N; Mechanical service life: > 1 million cycles, top to middle position, > 100 000 cycles, middle to bottom position

Thread Size

1/2 in. National Pipe Thread (NPT) in

Type

Cable with Flying Leads

Cable Receptacle

Shorting Plug

Extension Cable

Mounting Bracket

Holding Key

Cover

Use With

A4EG-C000041

All A4EG Models

A4EG-BE2R041

A4EG-BM2B041

Omron

Emergency stop switch, A4EG, enabling grip switch, momentary operation switch (2NO)

Emergency stop switch, A4EG, enabling grip switch, 1 NC (grip output)

The JSHD4-2-AH is an ergonomic three-position device which top part has LEDs, a front button and a top button, and which bottom part is equipped with a cable gland and a PCB with 10 screw connections. 
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4-2-AH

JSHD4-2-AH Three-position handheld device - Complete

The JSHD4-3 is a top part of a three-position device JSHD4. It has LEDs, and no extra buttons. It must be used with one of the following bottom parts: AB, AD, AH, AJ, AK, AL. Anti-tamper can be chosen as option with all except bottom part AK. 
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4-3

JSHD4-3 Three-position handheld device - Top part

JSTD1-E is a Safeball with two contacts, 2 NO, and 4 wires, 0.2m, for direct connection into an enclosure. Its ergonomic design provides several grip possibilities, a low activation force of approximately 2N, and flexible mounting possibilities. This model allows a maximum load of 30VDC, 2A resistive. It offers an IP67 protection degree. Its body is made of polypropylene.
Safeball is an ergonomic control device consisting of a spherical ball containing two pushbuttons, one on each side of the ball. Both buttons must be pressed in order to start and operate the machine. The risk of unintentional activation is thereby minimized 
Usually two Safeball are used together to form a two-hand control, and the operator must press all four push buttons simultaneously in order to operate the machine. If one or more of the buttons are released, a stop signal is given to the machine.

JSTD1-E

JSTD1-A is a Safeball with two contacts, 1NO and 1NC, and a 2 m long cable (4 conductors). Its ergonomic design provides several grip possibilities, a low activation force of approximately 2N, and flexible mounting possibilities. This model allows a maximum load of 30VDC, 2A resistive. It offers an IP67 protection degree. Its body is made of polypropylene.
Safeball is an ergonomic control device consisting of a spherical ball containing two pushbuttons, one on each side of the ball. Both buttons must be pressed in order to start and operate the machine. The risk of unintentional activation is thereby minimized 
Usually two Safeball are used together to form a two-hand control, and the operator must press all four push buttons simultaneously in order to operate the machine. If one or more of the buttons are released, a stop signal is given to the machine.

JSTD1-A

<section><h2>Grip Style Enabling Switch</h2><div class='introduction'><p>Enabling Grip Switch with Distinct Feel for Three Easily Discernible Positions</p><ul><li>Configure safety circuits by combining the A4EG with the<a target='_blank' title='G9SX-GS/A4EG' href='/en/products/g9sx-gs-a4eg'>G9SX-GS</a>.</li><li>Momentary and emergency stop switches are available.</li><li>Optional Holding Key.</li><li>Equipped with conduit connector.</li></ul></div><section><div class='description'></div></section><h3>Overview</h3><section class='left'><figure><img alt='CE_TUV_UL-CUS.jpg' src='/shop/images/product/omron/descriptions/CE_TUV_UL-CUS_tcm824-100970.jpg' style='max-height: 232px; max-width: 192px'></figure><div class='description'><ul><li>In addition to the standard models, the lineup also includes models with an emergency stop switch and models with a momentary operation switch.</li><li>An optional Holding Key (sold separately) provides a versatile method for selecting modes.</li><li>Equipped with conduit connector.</li></ul></div></section><h3>Operation</h3><section class='top'><figure><img alt='A4EG_Operation.jpg' src='/shop/images/product/omron/descriptions/A4EG_Operation_tcm824-103013.jpg' style='max-height: 1458px; max-width: 767px'></figure><div class='description'></div></section></section>

A4EG-OP3

The JSHD4-2-AB is an ergonomic three-position device which top part has LEDs, a front button and a top button, and which bottom part is equipped with a Cannon connector. 
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4-2-AB

JSHD4-2-AB Three-position handheld device - Complete

JSHD4H2 0.15m is a three-position device for internal panel mounting with 6 leads, each 150mm long.
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4H2 0.15m

JSHD4H2 0.15m Three-position dual pushbutton

A4EG-OP2

JSHD4 AJ is a JSHD4 bottom part with a cable gland and PCB with 16 screw connections. It is used with any JSHD4 top part, except JSHD4-1, to form a complete three-position device. 
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4 AJ

The JSHD4-2-AD is an ergonomic three-position device which top part has LEDs, a front button and a top button, and which bottom part is equipped with a M12-8 connector. 
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4-2-AD

JSHD4-2-AD Three-position handheld device - Complete

Emergency stop switch, A4EG, enabling grip switch, emergency stop switch (2NC)

The JSHD4-2 is a top part of a three-position device JSHD4. It has LEDs, a front button and a top button. It must be used with one of the following bottom parts: AB, AD, AH, AJ, AK, AL. Anti-tamper can be chosen as option with all except bottom part AK. 
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4-2

JSHD4-2 Three-position handheld device - Top part

JSTD1-B is a Safeball with two contacts, 1NO and 1NC, and 4 wires, 0.2m, for direct connection into an enclosure. Its ergonomic design provides several grip possibilities, a low activation force of approximately 2N, and flexible mounting possibilities. This model allows a maximum load of 30VDC, 2A resistive. It offers an IP67 protection degree. Its body is made of polypropylene.
Safeball is an ergonomic control device consisting of a spherical ball containing two pushbuttons, one on each side of the ball. Both buttons must be pressed in order to start and operate the machine. The risk of unintentional activation is thereby minimized 
Usually two Safeball are used together to form a two-hand control, and the operator must press all four push buttons simultaneously in order to operate the machine. If one or more of the buttons are released, a stop signal is given to the machine.

JSTD1-B

JSM 55 is a wall bracket for the JSHD4 three-position device.

JSM 55

JSTD1-C is a Safeball with two contacts, 1NO and 1NC, and a 10 m long cable  (4 conductors). Its ergonomic design provides several grip possibilities, a low activation force of approximately 2N, and flexible mounting possibilities. This model allows a maximum load of 30VDC, 2A resistive. It offers an IP67 protection degree. Its body is made of polypropylene.
Safeball is an ergonomic control device consisting of a spherical ball containing two pushbuttons, one on each side of the ball. Both buttons must be pressed in order to start and operate the machine. The risk of unintentional activation is thereby minimized 
Usually two Safeball are used together to form a two-hand control, and the operator must press all four push buttons simultaneously in order to operate the machine. If one or more of the buttons are released, a stop signal is given to the machine.

JSTD1-C

JSTD25K is a two-hand device with two JSTD1-B Safeball and one emergency stop button Smile 10 EK. The Safeball are mounted on each end of a 44x88  aluminum profile designed for two-hand applications. The emergency stop button is mounted on top. All are pre-wired to a M12-8 male connector. The Safeball are protected by flanges.
The JSTD25 control stations are pre-built two-hand devices offering the good ergonomics of Safeball. They can be used as fixed devices that are easy to install, or as mobile devices. All models are equipped with flanges to protect the Safeball from accidental operation, and from damage if the device is dropped on the floor when used as mobile device.

JSTD25K

445090180

CABLE, 10M, 8-PIN FEMALE MINI STYLE AND 8-PIN MALE MINI STYL

JSM C5 is used for mounting the Safeball JSTD1 on enclosures, machines or table tops.  A ball  and a socket allow for a flexible mounting.

JSM C5

During troubleshooting, minor adjustments or final inspections, ensuring safe motion in a hazard zone is critical to protecting your production and maintenance teams.  The A4E series enable grip switches can be used for hold-to-run function allowing the operator to maintain control during full hazardous situations or as part of local safety control inside hazardous areas. The A4E series offers three easily discernible positions, an optional emergency stop, a momentary operation switch, or a holding key, making it simple to meet your machine safety requirements.<ul>
<li>Configure safety circuits by combining the A4EG with the G9SX-GS.</li>
<li>Momentary and emergency stop switches are available.</li>
<li>Optional Holding Key.</li>
<li>Equipped with conduit connector.</li>
</ul>
<h4>Overview</h4>
<p><img src="https://assets.omron.com/m/04f0011a7facac5c/CE_TUV_UL-CUS-jpg.jpg" alt="CE_TUV_UL-CUS.jpg" title="CE_TUV_UL-CUS.jpg"></p>
<ul>
<li>In addition to the standard models, the lineup also includes models with an emergency stop switch and models with a momentary operation switch.</li>
<li>An optional Holding Key (sold separately) provides a versatile method for selecting modes.</li>
<li>Equipped with conduit connector.</li>
</ul>
<h4>Operation</h4>
<p><img src="https://assets.omron.com/m/5be26af259bc394e/A4EG_Operation-jpg.jpg" alt="A4EG_Operation.jpg" title="A4EG_Operation.jpg"></p>


A4EG Grip-Style Enabling Switch

Original Manufacturer Equipment (OEM) designing robotic applications sometimes are required to build a custom pendant unit for their machines to meet functional safety requirements. Design to help OEM’s overcome this challenge, the A4E is a 3-position enabling switch that meets ANSI/RIA 15.06 requirements.  With a “clicking feel” on the switch, the A4E provides auditory and tactile feedback to operators to help them maintain the correct run position and can be mounted in 2 directions allowing OEM’s maximum flexibility in pendent design.<ul>
<li>Clicking feel</li>
<li>Conforms to U.S. standards (ANSI/RIA R15.06-1999 (R2009)) for 3-position switches</li>
<li>Can be mounted in two directions</li>
</ul>
<h4>Overview</h4>
<p>Conforms to U.S. standards (ANSI/RIA R15.06-1999 (R2009)) for 3-position switches</p>
<h4>Operation</h4>
<p><img src="https://assets.omron.com/m/2a851e2b20da11ae/A4E_Operation-jpg.jpg" alt="A4E_Operation.jpg" title="A4E_Operation.jpg"></p>


A4E 3-Position Enabling Switch

A4EG-Cable

A4EG-Ext-Cable

A4EG-Spare

Enabling Switch Devices

Enabling Switches

Enabling Switch Accessories

Enabling Switch Cables

Popular Brands in Enabling Switch Devices