Popular Brands in { name }

Discover { name } at Proax - Canada's top automation distributor. Easy pick-up, fast shipping. Explore now.

Shop { name } Online

**Here are some possible reasons why:**
- You may’ve typed the wrong search term, such as a misspelled product name or special characters/symbols.
- We might not carry the product you're looking for

Please try refining your search by not using special characters.

**Are these not the issues? Feel free to contact us and we'll assist you as quickly as possible.**

Search

B10d Value

Operations to Bottom Position 968 000

Operations to Middle Position 2 million

20 million

Cable Length

0.2 m

10 m

Certification Agency

cURus

Kiwa

Inspecta

Communication interface

Contacts

Connection configuration

Depends on bottom part

Cable

Cable gland and 10 screw connection

M12-8 male

6 leads, 150 mm each

Cable gland and 5 screw connection

M12-5 male

Cannon 12 male pins

3 leads, 190 mm each

6 leads, 1200 mm each

2 leads, 290 mm each

3 leads, 1250 mm each

Cable gland and 16 screw connection

4 leads, 200 mm each

Number of Contacts CO

Number of Contacts NC

Number of Contacts NO

Performance level (PL)

Up to e

Product Net Depth / Length

340 mm

50 mm

60 mm

72 mm

13.5 mm

52 mm

40.8 mm

70 mm

110 mm

90.5 mm

80 mm

7 mm

35 mm

90 mm

3 mm

18 mm

75 mm

Product Net Height

157 mm

71 mm

29.25 mm

200 mm

100 mm

254 mm

56 mm

22 mm

189 mm

155 mm

73 mm

26 mm

Product Net Weight

0.139 kg

0.01 kg

0.154 kg

0.04 kg

0.064 kg

0.019 kg

0.07 kg

0.4 kg

0.3 kg

0.311 kg

0.225 kg

1.52 kg

0.13 kg

0.072 kg

0.004 kg

0.317 kg

0.334 kg

0.314 kg

0.046 kg

Product Net Width

33 mm

34 mm

26.55 mm

106 mm

364 mm

78 mm

40 mm

Technical Information

Operating force: Approx. 15 N for three-position button (ON), Approx. 45 N for three-position button (OFF), Approx. 2.5 N for top/front pushbutton; Mechanical service life: 1 million cycles, top to middle position, 100 000 cycles, middle to bottom position, and top/front push button

Foff: 20 N; Mechanical service life: > 1 million cycles, top to middle position, > 100 000 cycles, middle to bottom position

Foff: 17 N; Mechanical service life: > 1 million cycles, top to middle position, > 100 000 cycles, middle to bottom position

The JSHD4-2-AH is an ergonomic three-position device which top part has LEDs, a front button and a top button, and which bottom part is equipped with a cable gland and a PCB with 10 screw connections. 
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4-2-AH

JSHD4-2-AH Three-position handheld device - Complete

The JSHD4-3 is a top part of a three-position device JSHD4. It has LEDs, and no extra buttons. It must be used with one of the following bottom parts: AB, AD, AH, AJ, AK, AL. Anti-tamper can be chosen as option with all except bottom part AK. 
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4-3

JSHD4-3 Three-position handheld device - Top part

JSTD1-E is a Safeball with two contacts, 2 NO, and 4 wires, 0.2m, for direct connection into an enclosure. Its ergonomic design provides several grip possibilities, a low activation force of approximately 2N, and flexible mounting possibilities. This model allows a maximum load of 30VDC, 2A resistive. It offers an IP67 protection degree. Its body is made of polypropylene.
Safeball is an ergonomic control device consisting of a spherical ball containing two pushbuttons, one on each side of the ball. Both buttons must be pressed in order to start and operate the machine. The risk of unintentional activation is thereby minimized 
Usually two Safeball are used together to form a two-hand control, and the operator must press all four push buttons simultaneously in order to operate the machine. If one or more of the buttons are released, a stop signal is given to the machine.

JSTD1-E

JSTD1-A is a Safeball with two contacts, 1NO and 1NC, and a 2 m long cable (4 conductors). Its ergonomic design provides several grip possibilities, a low activation force of approximately 2N, and flexible mounting possibilities. This model allows a maximum load of 30VDC, 2A resistive. It offers an IP67 protection degree. Its body is made of polypropylene.
Safeball is an ergonomic control device consisting of a spherical ball containing two pushbuttons, one on each side of the ball. Both buttons must be pressed in order to start and operate the machine. The risk of unintentional activation is thereby minimized 
Usually two Safeball are used together to form a two-hand control, and the operator must press all four push buttons simultaneously in order to operate the machine. If one or more of the buttons are released, a stop signal is given to the machine.

JSTD1-A

The JSHD4-2-AB is an ergonomic three-position device which top part has LEDs, a front button and a top button, and which bottom part is equipped with a Cannon connector. 
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4-2-AB

JSHD4-2-AB Three-position handheld device - Complete

JSHD4H2 0.15m is a three-position device for internal panel mounting with 6 leads, each 150mm long.
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4H2 0.15m

JSHD4H2 0.15m Three-position dual pushbutton

JSHD4 AJ is a JSHD4 bottom part with a cable gland and PCB with 16 screw connections. It is used with any JSHD4 top part, except JSHD4-1, to form a complete three-position device. 
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4 AJ

The JSHD4-2-AD is an ergonomic three-position device which top part has LEDs, a front button and a top button, and which bottom part is equipped with a M12-8 connector. 
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4-2-AD

JSHD4-2-AD Three-position handheld device - Complete

The JSHD4-2 is a top part of a three-position device JSHD4. It has LEDs, a front button and a top button. It must be used with one of the following bottom parts: AB, AD, AH, AJ, AK, AL. Anti-tamper can be chosen as option with all except bottom part AK. 
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4-2

JSHD4-2 Three-position handheld device - Top part

JSTD1-B is a Safeball with two contacts, 1NO and 1NC, and 4 wires, 0.2m, for direct connection into an enclosure. Its ergonomic design provides several grip possibilities, a low activation force of approximately 2N, and flexible mounting possibilities. This model allows a maximum load of 30VDC, 2A resistive. It offers an IP67 protection degree. Its body is made of polypropylene.
Safeball is an ergonomic control device consisting of a spherical ball containing two pushbuttons, one on each side of the ball. Both buttons must be pressed in order to start and operate the machine. The risk of unintentional activation is thereby minimized 
Usually two Safeball are used together to form a two-hand control, and the operator must press all four push buttons simultaneously in order to operate the machine. If one or more of the buttons are released, a stop signal is given to the machine.

JSTD1-B

JSM 55 is a wall bracket for the JSHD4 three-position device.

JSM 55

JSTD1-C is a Safeball with two contacts, 1NO and 1NC, and a 10 m long cable  (4 conductors). Its ergonomic design provides several grip possibilities, a low activation force of approximately 2N, and flexible mounting possibilities. This model allows a maximum load of 30VDC, 2A resistive. It offers an IP67 protection degree. Its body is made of polypropylene.
Safeball is an ergonomic control device consisting of a spherical ball containing two pushbuttons, one on each side of the ball. Both buttons must be pressed in order to start and operate the machine. The risk of unintentional activation is thereby minimized 
Usually two Safeball are used together to form a two-hand control, and the operator must press all four push buttons simultaneously in order to operate the machine. If one or more of the buttons are released, a stop signal is given to the machine.

JSTD1-C

JSTD25K is a two-hand device with two JSTD1-B Safeball and one emergency stop button Smile 10 EK. The Safeball are mounted on each end of a 44x88  aluminum profile designed for two-hand applications. The emergency stop button is mounted on top. All are pre-wired to a M12-8 male connector. The Safeball are protected by flanges.
The JSTD25 control stations are pre-built two-hand devices offering the good ergonomics of Safeball. They can be used as fixed devices that are easy to install, or as mobile devices. All models are equipped with flanges to protect the Safeball from accidental operation, and from damage if the device is dropped on the floor when used as mobile device.

JSTD25K

JSM C5 is used for mounting the Safeball JSTD1 on enclosures, machines or table tops.  A ball  and a socket allow for a flexible mounting.

JSM C5

JSM 50G is a bottom plate for mounting two actuators like MKey keys on a JSHD4 three-position device. 
Safety interlock switches are used for monitoring the position of the three-position device when not used. If the safety interlock switches are MKey5, use bracket JSM5B for them.

JSM 50G

Safeball Coat is an extra protection for the Safeball JSTD1. It is made of silicone.

Safeball Coat

JSHD4 AL is a JSHD4 bottom part  with a holder for an Eva actuator, a cable gland and 10 screw connections. It is used with any JSHD4 top part to form a complete three-position device. A JSM54 is ordered separately to be used with the Adam sensor. 
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4 AL

The JSHD4-1-AA is an ergonomic three-position device which top part has no LED and no extra button, and which bottom part is equipped with a cable gland and 5 screw connections. 
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4-1-AA

JSHD4-1-AA Three-position handheld device - Complete

JSHD4H2B 0.15m is a three-position device for external panel mounting with 6 leads, each 150mm long,  and mounting holes up right. 
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4H2B 0.15m

JSHD4H2B 0.15m Three-position dual pushbutton

JSHD4H2 1.2m is a three-position device for internal panel mounting with 6 leads, each 1200mm long.
Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4H2 1.2m

JSHD4H2 1.2m Three-position dual pushbutton

ABB Enabling Switch Devices