Popular Brands in { name }

Discover { name } at Proax - Canada's top automation distributor. Easy pick-up, fast shipping. Explore now.

Shop { name } Online

**Here are some possible reasons why:**
- You may’ve typed the wrong search term, such as a misspelled product name or special characters/symbols.
- We might not carry the product you're looking for

Please try refining your search by not using special characters.

**Are these not the issues? Feel free to contact us and we'll assist you as quickly as possible.**

Search

Function

Momentary

Maintained

Connector

Pluggable miniature interface relay CR-M

Plug

Maintained/Momentary

Soft start with voltage ramp

Soft stop with voltage ramp

Switched interlocked socket outlets

Inlet

Receptacle

Boxed interface relay R600

Soft start with torque control

Soft stop with torque control

Kick start

Sequence start

Current limit

Start reverse (external contactors)

Automatic restart

Made to Order

Mounting

DIN Rail

DIN 3

DIN 1-3

Front

Snap-on door mounting

Mounted on Contactor

DIN 2

Single Mounting

Mounted on Contactor / Single Mounting

Placed in the compression clamp before tightening the screw, above the eventual conductor.

Use of this accessory requires the user to cut out the partition.

Base mount with flanges

Typical lamp test application

CPM cover protects the user from accidental touch on live circuits. It is clipped onto the end sections (FE), onto the intermediate sections (FJ) and onto the SCF, SCFT or SCFM separators. It can also be used for marking the terminal unit by means of a bl

Mounting of the vertical jumper bar between decks (ITVE2) ([]) Interconnection between decks is possible on each side of the switch, using accessory ITVE2. ([]) Trap door opens with a screwdriver.

DIN rail

DIN Rai

DIN Rail:

Four-hole mounting

Size

16-1/2 Inches Height x 13-1/4 Inches Width

16-1/8 Inches Height x 16-1/8 Inches Width

1/2 Inch

3/4 Inch

1 Inch

16-1/8 Inches Height x 23-1/8 Inches Width

1-1/4 Inch

9-1/8 Inches Height x 12-3/4 Inches Width

1-1/2 Inch

3/8 Inch

12-3/8 Inches Height x 17 Inches Width

4 Inches

12-5/8 Inches Height x 14 Inches Width

2 Inch

2 Inches

12-1/8 Inches Height x 14-1/2 Inches Width

13-1/2 Inches Height x 13-3/8 Inches Width

11-3/4 inches Height x 16-3/4 inches width

15-1/2 Inches Height x 13-1/2 Inches Width

The AF09-30-10-13 is a 3 pole - 690 V IEC or 600 UL contactor with 1 built-in auxiliary contact and screw terminals, controlling motors up to 4 kW / 400 V AC (AC-3) or 5 hp / 480 V UL and switching power circuits up to 25 A (AC-1) or 25 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

AF09-30-10-13

AF09-30-10-13 100-250V50/60HZ-DC Contactor

OHB65J6, pistol handle for base and DIN-rail mounted switches. Suitable for shaft diameter 6 mm. Color black, handle length 65 mm. IP65, NEMA 1, 3R, 12, padlockable with three padlocks in OFF-position, door interlock in ON-position. Screw fixing from the back side of the handle. No screws on the front ensures double insulation.

OHB65J6

DBL125 Screw Clamp Power Distribution Blocks

1SNL312510R0000

DBL125 Power Distribution Block, 115A, 1Pole, IN: 1 x (#8-2) + 1 x (#10-6):  OUT 6 x (#14-6), w/Cover, Din Rail Mount or Surface Mount, w/dovetail for multipole assembly

The ABB MCB-10 (1SFA611610R1001) is a modular contact block designed for integration with ABB 22 mm pilot devices such as pushbuttons and selector switches. It provides reliable switching performance in industrial control circuits and is built for quick installation and long-term durability.<ul><li>Contact configuration: 1 NO (normally open)</li><li>Mounting: Front-mount, modular snap-on design</li><li>Terminal type: Screw terminals</li><li>Rated operational current: up to 6 A</li><li>Rated insulation voltage: up to 690 V</li><li>Mechanical life: high endurance for repeated operations</li><li>Contact material: silver alloy for low resistance and reliability</li><li>Compatible with ABB modular pilot device range (22 mm system)</li></ul>

MCB-10

The AF09-30-10-11 is a 3 pole - 690 V IEC or 600 UL contactor with 1 built-in auxiliary contact and screw terminals, controlling motors up to 4 kW / 400 V AC (AC-3) or 5 hp / 480 V UL and switching power circuits up to 25 A (AC-1) or 25 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (24-60 V 50/60 Hz and 20-60 V DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

AF09-30-10-11

AF09-30-10-11 24-60V50/60HZ 20-60VDC Contactor

The AF26-30-00-13 is a 3 pole - 690 V IEC or 600 UL contactor with screw terminals, controlling motors up to 11 kW / 400 V AC (AC-3) or 15 hp / 480 V UL and switching power circuits up to 45 A (AC-1) or 45 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

AF26-30-00-13

AF26-30-00-13 100-250V50/60HZ-DC Contactor

Eden is a non-contact safety sensor used as interlocking device for e.g. doors and safe position monitoring. 

Eva actuator for use with Adam DYN and Adam OSSD sensors. With Eva General Code, the pair forms a low level coded non-contact safety sensor. Four pieces of DA 2B spacer rings are included.

Adam senses the presence of Eva without mechanical contact and therefore without any wear. The compact size of Eden and its 360°mounting possibility make it easy to use in most applications.

Eden is UL approved for use in US and Canada.

Eva General code

SU201M-C2 Miniature Circuit Breaker C-Char., 10kA, 2A, 1P UL489

SU201M-C2

Miniature Circuit Breaker - SU200M - 1P - 2 A - C - (230 V AC) 11.2 kA

Sentry SSR10 Safety relay with relay outputs 3NO+1NC, +24 VDC supply voltage and screw terminals.
For monitoring of safety devices with contacts, 1 or 2 equivalent channels, and safety devices with OSSD outputs.
Manual or automatic reset selectable by switch on front.

Sentry safety relays cover various types of safety applications up to PLe / SIL3. 
Basic models provide reliable supervision of simpler safety functions, while universal models provide advanced features and high flexibility.
Models with display offer preset configurations and extensive information to further simplify troubleshooting.
Additional variants offer a high accuracy timer function of ± 1% and an adjustable time setting range from 0-999 s. 
High output current capacity of up to 6 A can save the use of an intermediary contactor. Multi-reset allows up to 10 safety relays connected to one reset light-button.  
All models are available with detachable push-in or screw terminals. Terminals and coding kit to mark removed terminals are available as accessories.

Sentry SSR10

SU201M-C15 Miniature Circuit Breaker C-Char., 10kA, 15A, 1P UL489

SU201M-C15

Miniature Circuit Breaker - SU200M - 1P - 15 A - C - (230 V AC) 11.2 kA

Eden is a non-contact safety sensor used as interlocking device for e.g. doors and safe position monitoring. 

Adam safety sensor with DYNlink signal and information output. Used with an Eva actuator to form a non-contact safety sensor Eden. M12-5 male connector. Four pieces of DA 1B distance plates and four pieces of DA 2B distance rings are included.

Adam senses the presence of Eva without mechanical contact and therefore without any wear. The compact size of Eden and its 360°mounting possibility make it easy to use in most applications.

Eden is UL approved for use in US and Canada.

Adam DYN-Info M12-5

MCB-01

SU201M-C10 Miniature Circuit Breaker C-Char., 10kA, 10A, 1P UL489

SU201M-C10

Miniature Circuit Breaker - SU200M - 1P - 10 A - C - (230 V AC) 11.2 kA

SU201M-C5 Miniature Circuit Breaker C-Char., 10kA, 5A, 1P UL489

SU201M-C5

Miniature Circuit Breaker - SU200M - 1P - 5 A - C - (230 V AC) 11.2 kA

MCBH-00

Auxiliary contacts HKF1 with screw terminals change position with the main contacts of the manual motor starter. They are mounted on the front side of manual motor starters MS116, MS132 or MS165. Auxiliary contacts HKF1 are available as normally open or normally closed contacts.

HKF1-11

DBL175 Screw Clamp Power Distribution Blocks

1SNL317510R0000

DBL175 Power Distribution Block, 175A, 1Pole, IN: 2x(#8-1/0) OUT: 10x(#14-6), w/Cover, Din Rail Mount or Surface Mount, w/dovetail for multipole assembly

The AF16-30-10-13 is a 3 pole - 690 V IEC or 600 UL contactor with 1 built-in auxiliary contact and screw terminals, controlling motors up to 7.5 kW / 400 V AC (AC-3) or 10 hp / 480 V UL and switching power circuits up to 30 A (AC-1) or 30 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

AF16-30-10-13

AF16-30-10-13 100-250V50/60HZ-DC Contactor

The MS132-20 manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 20.0 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 100 kA at 400 VAC and trip class 10. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and terminal spacers are available as accessory.

MS132-20

MS132-20 Manual Motor Starter 16 ... 20 A

Pluto is a cost effective, powerful and compact safety PLC for all machine safety applications. Most safety devices on the market can be connected directly to Pluto and multiple safety sensors can be connected to a single input and still achieve the highest safety level. Programming is done easily in the accompanying software Pluto Manager.

Safety PLC with Pluto safety bus. Totally 46 I/O: 24 failsafe inputs + 16 non-failsafe outputs/failsafe inputs + 4 individually failsafe relay outputs + 2 individually failsafe transistor outputs.

Pluto B46 v2

Pluto B46 v2 Programmable safety controller

TE Connectivity DIN terminal blocks (legacy)

TE Connectivity DIN terminal blocks (new)

TE M8/M12 Cable Assemblies

ABB ACS880 Single Drives: Compact Industrial Motor ControlThe ABB ACS880 single drives deliver robust motor control in a compact, all-in-one package designed for demanding industrial applications. These wall-mounted and cabinet-built drives combine proven reliability with advanced technology to meet diverse automation needs.Key Specifications:<ul><li>Power range: 0.55 kW to 6000 kW (0.75-8050 HP)</li><li>Voltage compatibility: 230V to 690V</li><li>Enclosure ratings: Up to IP55/UL Type 12</li><li>Operating temperature: Up to 55°C ambient</li><li>Harmonic content: Less than 3% with ultra-low harmonic drives</li><li>Maintenance interval: Up to 9 years</li></ul>Advanced Features:<ul><li>Enhanced Direct Torque Control (DTC) for precise motor control</li><li>Compatible with all common motor types</li><li>Comprehensive fieldbus and industrial Ethernet support</li><li>Speed, position, and torque control capabilities</li><li>Flexible hardware and software customization options</li></ul>Industrial Benefits:<ul><li>Compact design for easy installation in various environments</li><li>Robust construction for harsh industrial conditions</li><li>Extended maintenance intervals reduce downtime</li><li>Seamless integration with existing automation systems</li><li>Ready-made solutions with customization possibilities</li></ul>

ACS880 Single Drives

Power &amp; Voltage:<ul><li>Power range: 0.37 kW to 15 kW (0.5 to 20 hp)</li><li>Input voltage:<ul><li>Single-phase: 115 V / 230 V AC</li><li>Three-phase: 230 V / 460 V / 600 V AC</li></ul></li></ul>Enclosure Options:<ul><li>IP20: For standard environments (panel mount, feed-through wiring)</li><li>IP66 (NEMA 4X): Washdown-ready for harsh conditions</li></ul>Control &amp; Performance:<ul><li>Scalar (V/Hz) and sensorless vector control (AC induction &amp; PM motors)</li><li>Overload: 150% for 1 min, 175% for 2 sec</li><li>Frequency: 0–500 Hz</li><li>Built-in Modbus RTU, STO (on 600 V), optional braking chopper</li></ul>User Interface &amp; Installation:<ul><li>Built-in LED keypad</li><li>Wall or DIN rail mounting (IP20)</li><li>Easy motor starter replacement with feed-through wiring</li></ul>

ACS255 Drives

ACS580 Drives Key Features:<ul><li>All-in-One Design: Comes with built-in features and components, reducing the need for external devices and simplifying installation.</li><li>Easy to Use: Intuitive user interface with startup assistants and a simple menu structure for quick commissioning and operation.</li><li>Versatile Applications: Suitable for both variable and constant torque loads like pumps, fans, conveyors, mixers, and compressors.</li><li>Energy Efficiency: Includes features like an energy optimizer to improve efficiency and reduce electricity consumption.</li><li>Safety First: Integrated safety functions such as Safe Torque Off (SIL 3) ensure machine and personnel safety.</li></ul><h3>Technical Highlights:</h3><ul><li>Power Range: 0.75 kW to 500 kW</li><li>Voltage Range: 200 V to 480 V</li><li>Enclosures Available: IP00, IP20, IP21, IP42, IP54, IP55</li><li>Communication &amp; Compatibility: Part of ABB’s “all-compatible” drive family with consistent interface and architecture for easy integration.</li></ul>

ACS580 Drives

Each sub-series features integrated electronic coils that reduce energy consumption by up to 80%, provide surge protection, and allow operation across wide voltage ranges without coil changes. ABB also offers auxiliary contact blocks and accessories to enhance functionality

AF 3-pole Contactors

The ABB ACQ580 series is a range of variable frequency drives (VFDs) designed specifically for water and wastewater applications. They support pumps, blowers, and mixers from 0.37 kW to 500 kW, offering precise control, energy savings, and system protection.Key Features:<ul><li>Built-in pump control: anti-cavitation, dry-run protection, sensorless flow, and multi-pump coordination</li><li>Ultra-low harmonics (THDi ≤ 3%) for compliance with IEEE 519</li><li>Safe Torque Off (STO), ATEX support, and IP00–IP55 enclosures</li><li>Easy setup with Hand-Off-Auto panel, Bluetooth option, and Drive Composer tool</li><li>Fieldbus-ready: Modbus, Profibus, Profinet, and more</li></ul>Ideal for: Municipal and industrial water treatment, boosting reliability, efficiency, and safety.

ABB All